A Barrett company - serving Fremont, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
Unilock · Fremont

Unilock Bathroom Remodeling in Fremont, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Fremont
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A new wood side gate with black hardware
A new concrete driveway with a paver border
A stone counter, tile backsplash and open shelf after a kitchen remodel
A garage converted into a guest room and home office
New architectural shingles with a clean valley
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Unilock Bathroom Remodeling: The Fremont Owner’s Guide

We install Unilock-compatible bathroom remodeling in Fremont, and a full bathroom remodel here typically runs $9,000 to $28,000 installed. This page is for the homeowner who already has Unilock product in the room – tile, wall panels, or a shower system – and now faces a failing surface, loose tile, or a shower that no longer holds water. Call (833) 620-6162 for a free estimate; we’re an independent contractor, not affiliated with Unilock.

Construction worker using a nail gun for professional residential roof installation in Fremont, CA

Call (833) 620-6162

How Fremont Owners Find Us

Most calls start the same way. A homeowner in Centerville or the Mission district notices a hollow thud underfoot near the shower curb. Or a grout line in the unibody wall panel starts weeping after a winter of Bay Area rain and heavy indoor humidity. By the time they call us, there’s usually softness behind the tile and a little discoloration at the base.

That softness is the real story. The tile didn’t fail – the waterproofing behind it did, and the Unilock surface was just the messenger. Here’s the part that matters for your wallet: the sooner we open up the wall and see what’s wet, the smaller the repair. A pinhole in a shower pan membrane caught early is a modest fix. The same leak six months later has usually rotted the subfloor and a couple of studs.

Which Unilock Models This Applies To

A tile setter installing wall tile in a shower

Unilock is a brand name that gets used loosely in bathroom circles – most of what homeowners have in their rooms is Unilock tile, wall panel systems, or a Unilock-manufactured shower surround, and each family has its own spec sheet. So the right part depends entirely on what’s actually in your bathroom, not on what a phone quote assumes.

The reliable way to identify your Unilock product is to find the original packaging, the back of the tile, or the manufacturer’s stamp on the panel. In our experience across Fremont, about a third of owners still have the spec sticker, a third can identify the series by the tile’s edge profile, and the rest need us to look. If you can’t find it, that’s fine – we’ll measure. Tile thickness, grout joint width, and panel dimensions tell us what family we’re working with, and that’s what determines whether the replacement part is a direct match or a retrofit.

On the OEM-versus-aftermarket question: for Unilock, we recommend the OEM part when it’s a direct replacement of a failing component inside a warranty window, and a quality aftermarket equivalent when the OEM path is longer than the repair can wait. We’ll tell you which camp your situation falls into before we touch anything, so you’re not guessing.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Unilock Bathroom Remodeling Is Failing

Most of these symptoms show up first in Fremont’s older homes – the 1950s and 1960s bathrooms around Irvington and Sundale are common, and they’re also where original waterproofing was thinnest. Here’s what we look for, and what each one usually means:

  • A hollow sound when you tap the tile. A dull thud instead of a sharp tap means the thin-set has let go and there’s a void behind the tile. In a shower, that void is where water sits and starts to grow.
  • Grout lines that crack or crumble repeatedly. If you’ve regrouted twice in three years, the movement isn’t cosmetic – the substrate is likely flexing, and the tile needs to come up.
  • Discoloration at the base of a wall panel or shower curb. Brown or yellow staining near the floor line is usually a slow leak tracking down behind the panel. By the time it’s visible, the wall cavity has been wet for a while.
  • A spongy or soft floor near the shower. This is subfloor rot, not a loose tile. It’s the most serious of the five, and it’s the one that gets more expensive by the week.
  • Water pooling outside the shower footprint. A failed pan liner or a curb that’s lost its seal. Fremont’s clay-heavy soils shift seasonally, and that movement finds the weak point in the shower pan first.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A new bay window with a cushioned seat

Bathroom remodeling in Fremont runs $9,000 to $28,000 installed. That range covers the whole room. For a smaller bathroom, the number lands between $5,000 and $12,000. If you’re replacing a shower system with a walk-in, plan on $4,500 to $12,000. A tub-to-shower conversion runs $3,500 to $10,000, and a straight shower replacement is $3,000 to $8,500. Vanity installation is $800 to $3,000.

What drives the number is what’s behind the Unilock surface – how much framing and substrate we have to replace, whether the pan needs a new liner, and the size of the room. Parts and labor are itemized on a written quote before we start. Every price change arrives as a written change order you approve, not as a line on the final invoice.

When we finish a job, our 90-Day Done Right Promise is written on the contract. If something we installed isn’t right, one call brings Tom back out.

DIY or Call Us?

There’s a short list of things you can safely check yourself. Tap the tile and listen for hollow spots. Write down what you see – where the stain is, how big it is, when it appeared. Photograph the grout lines. You can also pull up the manufacturer’s spec sheet if you still have it.

Where DIY goes wrong is in the wall. Opening a shower up to see what’s wet isn’t hard with a hammer, but once the waterproofing membrane is cut, the clock starts. If the pan liner is compromised – and most of these are – water has already been getting into the framing. We’ve been called into a bathroom in Niles where a homeowner patched the visible water damage and refinished the surface, and six weeks later a stud wall was soft. That’s a repair that costs $2,000 to redo versus $500 to do right the first time.

If you have any doubt at all, call (833) 620-6162. Estimates are free, and we’ll tell you what you’re actually looking at.

Common Questions

A new casement window over a kitchen sink

How long will a properly installed Unilock bathroom last?

Twelve to twenty years is a fair expectation when the waterproofing behind it is done right and the room gets air circulation. What shortens that life is our local climate – Fremont’s wet winters and dry summers push the envelope, and a bathroom without a fan gets the worst of it.

Can the failing part be repaired instead of replaced?

Sometimes, yes. A single cracked tile or a re-grouting job is a repair. Once the substrate is wet, it’s a replacement. We’ll tell you honestly which one your situation calls for.

How long does the replacement take?

A shower replacement is typically three to five working days. A full bathroom remodel takes two to four weeks depending on scope and inspection timing. We’ll give you a written schedule before we start.

How do you source the part?

We source Unilock-compatible product through manufacturer-authorized channels and cross-reference the spec sheet before we order. We also install KraftMaid, Cambria, and Silestone in kitchens, but for a bathroom, the tile and shower components are the piece that matters.

Do you pull the permits for a bathroom remodel in Fremont?

Yes, every eligible job – plumbing relocation, electrical work, and structural changes all require a permit, and we pull them and get the inspections signed. It’s part of the scope we put in writing. The permit inspector works for you, not for us, and that’s exactly how it should be.

Call (833) 620-6162 for a free estimate. A live person answers, day or night. We serve Fremont and the surrounding area, and we’ll walk your bathroom with you before you spend a dollar.

Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A newly finished roof with a ridge vent and step flashingA new front entry door with glass sidelightsA new black aluminum pool fence with a gateA new curved paver walkway to the front porchA galley kitchen opened up to the dining room with a new peninsulaA remodeled family room with new windows and a window seat

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Barrett in Fremont

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Fremont team

A local vetted partner works across Fremont and the towns around it, to the same written standard as every Barrett job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 620-6162
Local Service Coverage

Request a Free Estimate in Fremont

Tell us what you need - Barrett & Sons Construction Fremont responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch