







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Home Additions & ADU: The Fremont Owner’s Guide
After we get a look at your plans and your lot, Cambridge Pavers-based home additions in Fremont typically run $45,000 – $130,000 from first footing to final inspection. That’s the honest range for the work most Fremont owners describe: a genuine room addition with a permitted foundation, matching the paver hardscape that already defines the property. Fremont has plenty of homes where the patio, driveway, and walkway were all done in Cambridge Pavers, and when an addition project is drawn up, that existing hardscape often becomes the starting point for the whole plan. The paver surfaces you already have are your site conditions. They affect grading, drainage flows, and how the new footprint ties into what’s already there, and they’re why the same addition can run tens of thousands of dollars apart from one house to the next, even on the same street. The clue that something is at the end of its life rarely comes from the pavers themselves. It shows up in what they’re supporting: walkway joints opening up beside a settling footing, a patio that’s pooling water after a storm because the addition’s drainage pushed stormwater back toward the house. When you find one of those, an addition project has a decision point.

Which Cambridge Pavers Models This Applies To

Cambridge Pavers is a brand name, not a model, so the first thing we do on any addition or ADU call is identify which paver products are actually on your property and whether the new project will connect to them or complement them. Their lineup runs from traditional four-by-eight brick pavers up through the larger slab-style products used for pool decks and patios, and each has its own base-depth and edge-restraint requirements. The clay brick paver used on a 1990s-era Fremont driveway isn’t the same specification as the slab product installed on a 2019 patio in Niles, and you can’t always tell the difference from a photograph. We check three things on-site: the actual installed paver dimensions, the edge restraint system in place, and how the base was built (compacted aggregate depth, geotextile, drainage pitch). If a paver needs to be matched to an addition’s apron or walkway, we measure the existing course and work from the existing pattern rather than from the catalog photo. There is no “OEM vs. aftermarket” issue here in the way there would be for a specific replacement part. The material is commodity-first, and quality vendors meet the specification. What separates good work from bad is the base work under the pavers and the permitting, not the brand stamp.
For the trades inside the project, we work with KraftMaid cabinetry, Cambria and Silestone surfaces, and appliances the client chooses, all specified on the written scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambridge Pavers Home Additions & ADU Is Failing
The addition itself almost never “fails.” What we see fail are the paver systems attached to it and the drainage that runs through them. Here’s the honest list.
- Paver joints opening along the new addition’s perimeter. Usually a sign the original base was thin or the addition’s footing load is working the joint open. It doesn’t mean the pavers are bad; it means the base under them was never built to carry a structure that neighbors the walk.
- Standing water against the new build after rain. In Fremont’s wet winters this is the most common failure we’re called out for. The grading around the addition is frequently off by an inch or two, sending stormwater toward the house instead of away from it.
- Pavers settled or lifted at the transition to the addition apron. Typically an edge-restraint failure. When the addition was built, the edge restraint at the junction often gets omitted, and a couple of Fremont rain seasons later the paver course has walked.
- Efflorescence blooming along the addition’s paver walkway. The white haze is mineral salt migration. Common on new pavers in the Fremont climate and usually cosmetic, but persistent bloom points at water moving where it shouldn’t.
- A pattern mismatch on an added walk or patio. Homes with existing Cambridge Pavers sometimes get the addition’s apron done in a different product. If the harmony matters to you (and on most Fremont lots it does), this is worth correcting before the rest of the work goes in.
None of these mean you need to rebuild. But each is a sign the scope you’re pricing needs to account for the paver work, not just the building envelope.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full Cambridge Pavers-based home addition in Fremont, the installed range is $45,000 – $130,000, and that’s the number to plan against if you’re building new square footage with paver hardscape tied to it. If the project is an ADU, the range is $90,000 – $220,000. Garage conversions run $30,000 – $80,000. Where you land inside those ranges is driven by three things: the footprint and foundation requirements on your specific lot, the site prep and grading needed to make the paver systems meet the new structure correctly, and the finish level inside. A paver patio alone, if that’s the standalone piece, runs $3,500 – $11,000 (a driveway is $7,000 – $18,000). We write a line-item scope before we price: base prep, edge restraint, drainage, paver product, building trades, permits and inspections. Every scope change is a written change order before we touch the work. The finished job comes with the written 90-Day Done Right Promise, one call and we’re back out. No surprise invoices at the end.
DIY or Call Us?
There are things you can safely check. Look at the perimeter where your addition meets the pavers and note any joint that’s opened more than a quarter-inch. Watch the water in a heavy rain and see where it pools. Take photos of the paver pattern where it meets the new work. All that is fine. What isn’t fine is trying to reset pavers at a structural transition or re-grade drainage around an addition yourself. The base under a paver walk that carries footing load is a structural decision, and getting it wrong in Fremont’s clay-heavy soils costs more to correct than to do right the first time. This isn’t just about appearance. Water against a foundation is a durability problem, and we’ve seen it turn a $3,000 fix into a $30,000 fix across a couple of wet winters. Call us at (833) 620-6162 and we’ll walk the property with you. No charge for the estimate, and no pressure.
FAQs

A properly built addition with a well-prepped paver system in the Fremont climate should be looking solid and unshifting for 25 years or more. The paver base is the variable. A base compacted to spec with the right aggregate depth and edge restraint holds. A base done fast in 1990 does not, and that’s what we find most often.
Often, yes. If the pavers themselves are sound (no crumbling, no delamination), resetting, re-compacting the base, replacing edge restraint, and re-sanding joints is usually the fix, and it’s a fraction of replacement. We always tell you which category the pavers are in before recommending either path. Call (833) 620-6162 for a look.
The paver work itself at a typical addition tie-in is 2 – 4 days for the base prep, installation, and sanding. The full addition timeline is much longer and depends on the scope and permit turnaround; we lay out the full calendar in the written scope before you sign anything.
We work with the same supply network that carries the Cambridge Pavers line and match the product to your existing install by measurement on-site. There’s no guesswork from a catalog photo. Call (833) 620-6162 with a photo of your existing pavers and we’ll tell you on the first call what we’re working with.
Barrett & Sons Construction is an independent contractor and is not affiliated with Cambridge Pavers. We install and service the brand, and we’ll tell you plain what your project needs.
If you’re in Fremont and your addition or paver project has a question in it, call Barrett & Sons Construction at (833) 620-6162 for a free estimate. A live person answers, day or night. We’ll come out, look at what you’ve got, and hand you a written scope with the price on it. That’s how it should work.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












