







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Driveway & Pavers: The Fremont Owner’s Guide
We install and repair Oldcastle driveway and paver systems across Fremont, and a full paver driveway installation typically runs $7,000 – $18,000 depending on square footage, base prep, and whether old concrete or asphalt has to come out first. Paver patios land between $3,500 and $11,000. Most Fremont owners discover the problem the same way: a line of pavers near the driveway apron has started to sit lower than the rest, or after a February rainstorm the joints between pavers stop holding sand and you can watch water pool against the garage slab instead of running off. What looks like worn pavers is usually a base or drainage failure underneath them, and that’s what we fix. Barrett & Sons Construction is an independent contractor and not affiliated with Oldcastle; we install and repair their systems and other brands too.

Which Oldcastle Models This Applies To

Oldcastle sells through several paver lines and the part number you need depends on which one is on your driveway. The common residential profiles in Fremont are the standard 4×8 and 4×9 rectangular concrete pavers, the tumbled “old town” style that shows up on older Niles and Centerville driveways, and the interlocking heavy-duty profiles used where a car actually parks. Before you order a replacement or matching piece, measure the length, width, and thickness of a single paver with a tape measure and write the numbers down; concrete pavers here run 60mm to 80mm thick, and mixing thicknesses on a drive that takes vehicle weight is how you get a rocker within a season. Check the stamp or batch mark on the back of a loose paver, and look at the edge profile: a beveled edge and a straight edge won’t sit flush next to each other.
Then comes the OEM-versus-aftermarket call. For Oldcastle concrete pavers, a matching aftermarket paver from a different manufacturer is usually fine for a repair patch as long as thickness and color family match, since the paver itself is a molded concrete block. Where matching matters most is color and texture on a visible field, because a new batch of the same line can read a shade lighter than pavers that have been sun-cured on your driveway for fifteen years. That’s the gotcha worth knowing: buy all patches for one area from a single batch and dry-lay them first to check the color against what’s already there.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Driveway & Pavers Is Failing
- Pavers sitting lower than their neighbors. A low spot in the field almost always means the compacted base beneath it settled, not that the paver shrank. On a Fremont drive that sees regular vehicle traffic, this shows up first near the apron where tires turn.
- Sand washing out of the joints. When joint sand disappears after every rain, water is moving through the field instead of off it. That’s a drainage or slope problem, and refilling the joints only hides it until the next wet season.
- Loose or rocking pavers. A paver that moves underfoot has lost its bedding layer, usually from a base that wasn’t compacted in lifts. Left alone, one rocking paver works its neighbors loose and the repair area grows.
- Weeds and grass in the joints. Persistent growth between pavers points to joint sand that’s gone and a base holding moisture. It’s also a sign the edge restraint has shifted.
- Ponding against the garage or foundation. Water pooling at the slab edge instead of draining away is the one to take seriously, because it pushes moisture against the house. In Fremont’s clay soils, that pooling often comes from a base that doesn’t drain, not from the pavers themselves.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what a repair or replacement runs in Fremont, parts and labor together:
- Paver driveway installation (full): $7,000 – $18,000
- Paver patio installation: $3,500 – $11,000
- Driveway replacement: $5,000 – $14,000
- Driveway sealing (protects an existing paver or concrete surface): $250 – $700
What moves you up or down inside those ranges: square footage, whether the existing surface has to be demolished and hauled, how deep the base needs to go, and whether drainage has to be corrected with a new slope or a channel drain. We give you a written line-item quote that separates materials, base prep, labor, and disposal, and any change to scope arrives as a written change order before work starts. Every completed job is backed by our written 90-Day Done Right Promise.
DIY or Call Us?
There are things you can check yourself safely. Walk the driveway and mark low or rocking pavers with a pencil, measure a single paver for a replacement, and note where water pools after rain. Refilling joint sand on a sound driveway is reasonable homeowner work. Where DIY goes wrong on pavers is the base: pulling up a settled section and re-bedding it without compacting the sub-base in proper lifts just means it settles again by the next rainy season, and correcting slope against the garage slab is a drainage calculation, not a guess. This isn’t dangerous work like an electrical panel, but a poorly rebuilt base can push water toward your foundation, and that gets expensive. Call us at (833) 620-6162 for a free estimate and we’ll tell you honestly whether you need a patch or the base addressed.
FAQs

The concrete pavers themselves hold up for decades. What fails first is the base and joint sand underneath, and in Fremont’s clay soil and wet winters, a base that wasn’t built to drain can show settlement within a few seasons. Proper base prep and edge restraint are what determine lifespan, not the paver surface. Call (833) 620-6162 for an exact quote on your driveway; estimates are free.
Yes, in most cases. If the surrounding pavers are sound and only a section has settled, we can lift, re-level the base, and re-set the existing pavers rather than replace the whole drive. If the base under the whole field is failing, a spot repair won’t hold and we’ll tell you so. Call (833) 620-6162 for a free second opinion on any written estimate.
A spot repair can be done in a single day. A full paver driveway installation typically takes several days between demolition, base prep, setting, and joint sand. We give you the schedule in writing up front so you know what to expect. Call (833) 620-6162 to schedule your free estimate.
We match the paver by measuring thickness and profile, checking the batch mark, and dry-laying a sample against your existing field for color before we commit. We source through supplier channels and confirm availability before ordering. Call (833) 620-6162 and we’ll walk you through what your driveway needs.
If your Oldcastle driveway or paver patio in Fremont has settled pavers, washed-out joints, or water pooling against the house, call Barrett & Sons Construction Fremont at (833) 620-6162 to schedule your free estimate. We install premium hardscape brands like Belgard and Techo-Bloc, and we also handle KraftMaid, Cambria, and Silestone on the interior side. Every eligible job gets permits pulled and inspections signed, every price change comes in writing first, and a live person answers the phone around the clock.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












