







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Home Additions & ADU: The Fremont Owner’s Guide
We build and finish Oldcastle-compatible home additions and ADUs across Fremont, and a full addition typically runs $45,000 – $130,000 installed, while a detached or attached ADU runs $90,000 – $220,000. This is planned construction, not emergency work, so we schedule it properly and give you a written line-item quote up front. Most Fremont owners call us at the point where the framing is up, the shell is dried in, and someone has to make the rough openings, the exterior cladding and the window and door package match what Oldcastle’s plans actually call for.

Barrett & Sons Construction Fremont is an independent service provider. We install and finish Oldcastle-compatible additions and ADUs, and we’re not affiliated with Oldcastle. If you already have a failed or mismatched part in the assembly (a header, a manufactured window unit, a door frame, a panel), we can match it to your model and get the right piece in.
Key Takeaways
- Oldcastle addition and ADU packages are matched by series and spec sheet, not by eyeballing a photo of the old part.
- Addition work in Fremont runs $45,000 – $130,000; ADU construction runs $90,000 – $220,000. These are installed figures.
- The part that fails first on an addition is usually the exterior envelope: window and door frames, flashing, and the cladding transitions.
- Every eligible job gets permits pulled and inspections signed, and every scope change is a written change order before work moves.
Which Oldcastle Models This Applies To

Oldcastle covers a lot of ground, so the first job is figuring out which line your home addition or ADU assembly came from. Their structural and envelope products show up across several series, and the part numbers, rough-opening dimensions, and performance ratings shift between them. If you have the original spec sheet or the plan set from the addition, that’s the fastest path: the sheet lists the series, the unit size, and the performance rating (things like design-pressure and U-factor for windows, gauge and span for headers and framing members).
Without paper, we identify the part three ways. First, check the label or stamp on the unit itself; manufactured windows and doors carry a certification label with the series and ratings, and framing members usually have a mill mark. Second, measure the rough opening precisely, not the visible face. Third, note the wall assembly: Oldcastle units are built to specific wall thicknesses and flashing details, and a part from the wrong series will physically fit and still leak. That’s the compatibility gotcha most Fremont owners hit.
On OEM versus aftermarket for Oldcastle specifically: for windows, doors and anything in the weather envelope, we lean OEM or a manufacturer-approved equivalent, because the flashing and rating are engineered as a system. For trim, fasteners and non-structural accessories, a quality equivalent is fine and often better priced. We’ll tell you which side of that line each part falls on before you spend anything.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Home Additions & ADU Is Failing
- Water staining or soft drywall at the window and door corners. That’s almost always a flashing or sill-pan failure at the rough opening, not a paint problem. The water runs in behind the frame and shows up inside weeks later.
- A door or window that sticks worse in spring. Fremont’s wet winters swell wood frames and shift the assembly; a unit that only sticks seasonally is telling you the frame or the rough opening has moved.
- Drafts or cold spots along the addition wall. Usually a failed seal, a gap in the air barrier, or a window unit installed without the correct backer and foam detail. You’ll feel it before you see it.
- Cracks at the junction where the addition meets the original house. The tie-in is the hardest part of any addition to get right. Movement here points to a header, connector or foundation detail that wasn’t built to the plan.
- Condensation or fog between window panes. The sealed glass unit has failed. It’s a straight replacement, and on an Oldcastle-compatible unit we match the series so the frame and glass come as one piece.
If you’re seeing several of these at once, it’s worth a professional look at the whole envelope before you patch one spot. Small leaks in an addition compound quietly through a Fremont rainy season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how the numbers land for Fremont. We quote parts and labor separately so you can see exactly what the part costs and what the install costs. Every price change comes as a written change order before work happens.
| Scope | Installed range (Fremont) |
|---|---|
| Home addition (full build/finish) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion (ADU path) | $30,000 – $80,000 |
| Window and door replacement within the addition | $4,500 – $15,000 |
| Single manufactured window/door unit swap | $800 – $3,000 |
What drives the range: the size and series of the part, whether the wall has to be opened to reach it, whether the existing flashing and trim can be reused, and permit/inspection requirements for the scope. On a full addition or ADU, the range moves with square footage, foundation and site work, and the finish level you choose inside. Windows and doors are a big lever: a whole-addition window package lands in the $4,500 – $15,000 band depending on count and unit type.

Every completed job is backed by our written 90-Day Done Right Promise, and every eligible job gets permits pulled and inspections signed. We install premium brands across the trades we touch, including KraftMaid, Cambria and Silestone on the finishes, and we’re happy to match whatever’s already in your addition.
DIY or Call Us?
Some of this you can safely check yourself, and some you shouldn’t touch. Safe to check: read the label on a window or door unit, measure the rough opening, photograph the flashing detail at the corners, and note which wall sticks or leaks. That information saves us time and saves you money.
Where DIY goes wrong on an addition is the envelope and the structure. Replacing a window unit in a finished wall means opening the wall without breaking the air and water barrier, then re-flashing and sealing it so it doesn’t leak next winter. Moving or resizing a rough opening means cutting into framing that carries load, and that’s structural work. Getting the flashing sequence wrong on an Oldcastle-compatible unit is the single most common way a Fremont addition develops a leak that shows up a season later. If the part sits in the weather envelope or the framing, have it done right.
Call (833) 620-6162 and a live person picks up, any hour. Estimates are free, and a second opinion on any written estimate costs you nothing.
FAQs

Most Oldcastle-compatible envelope parts – window and door units and their flashing – are built to hold up for 15 to 25 years in a Bay Area climate, but the real driver is the install detail, not the part. Fremont gets wet winters and dry summers, and a poorly flashed unit fails in a fraction of that time while a well-detailed one goes the distance.
Sometimes yes. Seals and flashing can often be renewed, and a sticking door can be re-hung and re-sealed without a new unit. A failed sealed glass unit or a cracked frame can’t be repaired, and on those we match the Oldcastle series and replace the assembly. We’ll tell you honestly which one you’re looking at.
A single window or door unit swap is usually a day, weather permitting. A larger envelope scope within the addition takes several days, and a full addition or ADU is a multi-week project scheduled in writing. We give you the timeline up front and update it whenever the scope changes.
We identify your Oldcastle series from the label, the plan set, or precise rough-opening measurements, then source OEM or a manufacturer-approved equivalent for envelope parts, and a quality equivalent for trim and accessories. We quote the part and labor separately, and any change to that quote is a written change order before we proceed.
When you’re ready to price it, call Barrett & Sons Construction Fremont at (833) 620-6162 for a free estimate. You’ll get a written line-item quote, permits handled on eligible jobs, and our 90-Day Done Right Promise standing behind the work.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












