







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fremont Homeowners Choose CertainTeed Construction
We provide independent CertainTeed construction service in Fremont, CA, and what sets our CertainTeed work apart is the assembly: we build and repair CertainTeed roof and siding systems the way the coastal East Bay climate actually demands, with the flashing, ventilation, and fastener details that decide whether the product lasts. CertainTeed has been specified on Bay Area homes for decades, and the homeowners who call us usually already own the product and want someone who knows it. We’re Barrett & Sons Construction Fremont, an independent CertainTeed service provider. We are not affiliated with, sponsored by, or authorized by CertainTeed, and we don’t claim to be. Our crew members have up to 28 years of experience with CertainTeed Landmark shingles, Presidential impact-rated lines, CedarBoards polymer siding, and Flintlastic low-slope membranes. Call (833) 620-6162 for a free estimate on your Fremont roof or siding project.

Why Trust Barrett & Sons Construction Fremont for Your CertainTeed Construction?

CertainTeed products show up on this city’s roofs in specific ways, and knowing those ways is the difference between a repair that holds and one that fails in the first wet season. Our crew members have installed and repaired Landmark, Landmark PRO, Landmark TL, Presidential Shake, Presidential Solaris, CedarBoards, Cedar Impressions, and Flintlastic systems across Fremont for years. That familiarity matters because CertainTeed’s warranty is conditional: it covers manufacturing defects, not the installation choices around the product.
We use genuine CertainTeed accessory components where the assembly depends on them. Starter strip, hip-and-ridge cap, and matching Flintlastic cap sheet are all part of the system CertainTeed warranties, and substituting the wrong accessory can quietly void coverage on a claim. Where the brand doesn’t matter, we substitute quality aftermarket underlayment and fasteners instead of paying a premium for a label. Every scope, allowance, and price change arrives as a written change order before work begins, so what we quote is what you sign. Permits are pulled and inspections signed on every eligible job. And every completed CertainTeed job is backed by our 90-Day Done Right Promise, written on the contract. Call (833) 620-6162 to schedule your free estimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CertainTeed Construction Problems We Fix in Fremont
Fremont’s housing stock runs from 1950s-60s ranch and Eichler-style homes in the central districts to newer high-density infill near Warm Springs, and that range produces a matching range of CertainTeed failures. Here are the ones we see most.
- Landmark shingles losing granules and curling at the edges. This is the classic East Bay pattern: hot, dry summers bake the shingles from above while a poorly vented attic cooks them from below. Once the seal strips let go and the edges curl, the shingle no longer sheds water the way it was designed to. Granules collecting in gutters and at downspouts are usually the first sign.
- Premature cracking and blistering on Landmark and Landmark PRO. These are almost always workmanship problems, not product defects. Installing CertainTeed shingles over a marginal or unvented roof deck traps heat and moisture under the mat, and the shingle fails early. We inspect the deck and ventilation before we quote a repair, because patching over a bad deck just buys a few months.
- Flintlastic low-slope membranes with open seams and lifting laps. Fremont’s mid-century homes often carry flat or low-slope roof sections over additions and garages. Flintlastic SA is a self-adhered system, and when seam laps are open or cap-sheet overlap is short, water ponds, finds the gap, and works its way into the deck. Seam integrity is the whole game with Flintlastic.
- CedarBoards siding with fastener over-driving and caulk failures. Over-driven fasteners crush the panel face, and caulk lines at penetrations crack as the polymer expands and contracts through hot summers and wet winters. Water gets behind the panel, and the moisture damage shows up inside the wall before it shows outside.
- Presidential Solaris impact-rated shingles with seal-strip failure from heat. These are rated for impact, but the seal strips still depend on proper attic ventilation to stay seated. In an under-vented Fremont attic, even an impact-rated shingle can lift and flutter in the first strong wind.
CertainTeed Parts & Our Repair-vs-Replace Approach

For CertainTeed assemblies, we use genuine CertainTeed accessories where the warranty and water-shedding depend on them: starter strip, hip-and-ridge cap, and matching Flintlastic cap sheet. Underlayment and fasteners don’t need to carry the CertainTeed label; quality aftermarket products do the same job without the premium. We source parts per job rather than stocking CertainTeed material locally, so lead times and availability depend on the specific line and accessory.
The repair-or-replace call is where we earn trust. If a Landmark roof is 20-plus years old with granule loss and edge curl across multiple slopes, honest replacement beats piecemeal patching every time; patching a tired CertainTeed roof just pushes the full cost a few months down the road. Isolated storm damage on a healthy roof is usually a repair. We’ll tell you which one you have, in writing. Call (833) 620-6162 for a free second opinion on any written estimate.
Our CertainTeed Service Process – Step by Step
- 1
Diagnosis. We inspect the CertainTeed system in person: shingle condition, granule loss pattern, seal-strip integrity, deck condition, and attic ventilation. On Flintlastic, we check every seam and cap-sheet lap.
- 2
Written scope and estimate. You get a line-item quote with the CertainTeed accessories, underlayment, and ventilation corrections spelled out. Any change later arrives as a written change order before work moves.
- 3
Repair or installation. Crew members install or repair to CertainTeed’s published detail for the specific line, whether that’s Landmark, Presidential, CedarBoards, or Flintlastic. Permits are pulled and inspections signed on every eligible job.
- 4
Water test and ventilation check. We verify the assembly sheds water the way it should and that intake and ridge venting match the CertainTeed system’s requirements.
- 5
Warranty and walkthrough. We document the installed CertainTeed products and accessories so any future claim has a clean paper trail, and we back the work with the written 90-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterCertainTeed Products We Service & Install in Fremont
We service and install the CertainTeed lines that actually appear on Fremont roofs and walls: the Landmark series (Landmark, Landmark PRO, Landmark TL), the most common CertainTeed asphalt shingle family on East Bay roofs; Presidential Shake and Presidential Solaris impact-rated shingles; CedarBoards and Cedar Impressions polymer siding; and Flintlastic SA self-adhered roofing with matching Flintlastic cap sheet for flat and low-slope sections. If your CertainTeed product is one of these, we know its failure points and its accessory requirements. If you’re not sure which line you have, we’ll identify it during the free inspection.

We Also Service These Brands
We’re not a single-brand shop. Alongside CertainTeed, we install and service KraftMaid cabinets and Cambria and Silestone countertops in kitchens, and Kohler fixtures in bathrooms. That matters if your project touches more than one trade: a Fremont addition that needs a new CertainTeed roof, a Kohler bathroom rough-in, and a Cambria counter can run through one written scope with one accountable crew.
FAQs – CertainTeed Construction Service in Fremont

No. We’re an independent CertainTeed service provider, not an authorized or sponsored CertainTeed dealer, and we don’t claim manufacturer authorization. We install and repair CertainTeed products using genuine CertainTeed accessories where the assembly depends on them, and we choose assemblies based on what the home needs rather than brand mandates. Call (833) 620-6162 to schedule a free estimate.
We use genuine CertainTeed accessories where the warranty and water-shedding depend on them: starter strip, hip-and-ridge cap, and matching Flintlastic cap sheet. For underlayment and fasteners, we use quality aftermarket products because the brand doesn’t affect performance there. That mixed approach keeps your CertainTeed warranty intact without charging you for a label where it doesn’t matter. Call (833) 620-6162 with questions about your specific product.
A CertainTeed roof repair is usually a one- to two-day job; a full tear-off and Landmark or Presidential replacement typically runs three to five days depending on roof size, deck condition, and ventilation corrections. Flintlastic low-slope work and CedarBoards siding repairs vary with square footage and access. We give you a written schedule with the estimate so you know what to expect. Call (833) 620-6162 to get yours.
We cover the Landmark series (Landmark, Landmark PRO, Landmark TL), Presidential Shake and Presidential Solaris impact-rated shingles, CedarBoards and Cedar Impressions polymer siding, and Flintlastic SA self-adhered roofing with cap sheets. Those are the CertainTeed lines that show up on East Bay roofs and walls most often. If you have a different CertainTeed product, call (833) 620-6162 and we’ll tell you straight whether we service it.
Not if the repair or installation follows CertainTeed’s published detail for the specific line and uses the accessories the assembly requires. The risk comes from substitutions, like a mismatched hip-and-ridge cap or an under-spec’d Flintlastic lap, that a manufacturer can point to in a claim. We document the installed CertainTeed products and accessories so your warranty has a clean paper trail. Call (833) 620-6162 for a free estimate.
CertainTeed roof work in Fremont runs from about $400 to $1,800 for a repair, $8,000 to $20,000 for a full roof replacement and installation, $15,000 to $40,000 for metal roofing, and $400 to $1,800 for gutters and accessories. These are real market ranges, and your written line-item quote will be specific to your roof, deck, and ventilation. Call (833) 620-6162 for an exact quote; estimates are free.
| CertainTeed Service | Typical Fremont Range |
|---|---|
| Roof Repair | $400 – $1,800 |
| Roof Replacement & Installation | $8,000 – $20,000 |
| Metal Roofing | $15,000 – $40,000 |
| Gutters & Accessories | $400 – $1,800 |
Book Your CertainTeed Service in Fremont, CA
If you’ve got a CertainTeed roof or siding that’s showing its age, call (833) 620-6162 for a free estimate. We inspect the assembly in person, quote it in writing, pull the permits, and back the work with the 90-Day Done Right Promise. A live person answers the phone 24 hours a day.
Written by the team at Barrett & Sons Construction Fremont.












