







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fremont Homeowners Choose CWS Construction
Barrett & Sons Construction Fremont provides independent CWS construction service throughout Fremont, covering kitchen cabinets, walk-in shower enclosures, vanity cabinets, and 30-year architectural shingle roofing on the area’s 1950s ranch homes and newer townhomes alike. What separates our CWS work is pattern recognition: we know which CWS lines fail in predictable ways – stripped hinge screws in shaker doors, mineral buildup on shower sweeps in Fremont’s hard water, wind lift at the ridge on hillside roofs – and we build the fix around the cause, not the symptom. We’re not affiliated with or authorized by CWS. We’re an independent provider, which means honest comparisons, genuine OEM-compatible parts where they matter, and a written quote before any tool comes out of the truck.

Why Trust Barrett & Sons Construction Fremont for Your CWS Construction?

Our technicians have up to 28 years of experience, and much of that time has been spent working with CWS cabinetry, shower systems, and roofing across Fremont’s mixed housing stock. That matters because CWS isn’t a single product – it’s a set of lines with distinct construction methods. A CWS shaker cabinet with a solid wood face frame and plywood box fails differently than an MDF-core vanity. A semi-frameless shower enclosure with an aluminum track fails differently than a framed unit. Knowing those differences is what separates a repair that lasts from one that comes back.
We source OEM-compatible hardware for CWS cabinets and shower enclosures because aftermarket hinges and sweeps often have mismatched screw patterns and weaker materials. On roofing, CWS-branded shingles are typically manufactured by major suppliers, so we’ll disclose equivalent quality options when the supply chain is slow – always with your approval. Every CWS job we take on is done in a warranty-safe way: we don’t drill new holes in a sealed frame, we don’t substitute parts that void a manufacturer’s coverage, and we document what was installed. Every scope and every price change arrives as a written change order before work proceeds. Permits are pulled and inspections signed on every eligible job. If something isn’t done right, the written 90-Day Done Right Promise means one call brings us back.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Fix in Fremont
- Shaker cabinet doors that bind or sag within 2 – 3 years. Undersized hinges combined with inadequate frame reinforcement are the usual culprits, especially with particleboard-core doors in CWS shaker lines. Repeated slam cycles strip the hinge screws loose from the door frame. The fix is dowel inserts or threaded reinforcement plates, then an upgrade to heavier-duty hinges sized for the door weight.
- Shower door leaks at the hinge side and bottom sweep. The factory sweep doesn’t always seal tight against the curb, and in Fremont’s hard water, mineral buildup accelerates gasket degradation within a few years. A new OEM sweep and re-aligned hinge plates usually solve it. When the glass edge or track has pitted, gasket replacement alone won’t hold.
- Shingle blow-off at ridge and eaves during high-wind events. Fremont’s gusty hillside areas put real stress on roof edges, and CWS architectural shingles installed without an enhanced nailing pattern are vulnerable. Repair is often straightforward – six-nail pattern, sealed ridge caps, proper starter course. Full replacement comes into play when shingles are near end-of-life or the deck has taken water.
- Vanity cabinet swelling and delamination at the bottom rail. Slow leaks under the sink work their way into CWS MDF-core vanities when the caulk line at the countertop fails. That’s a quiet failure – you notice the swelling before you notice the leak. Resealing early saves the cabinet; once the MDF has swelled and split, the box is usually beyond a cosmetic fix.
- Cabinet doors that no longer close flush because the face frame has flexed. Plywood-box CWS cabinets generally hold up well, but face frame movement from humidity swings in Fremont’s dry summers and wet winters can throw doors out of alignment. Adjusting the hinges solves most of these. When the box itself has moved, reinforcement plates or new hinge locations are the durable fix.
If any of these sound familiar, the diagnostic checklist is the same: check the hinge screws for stripping, check the caulk line at the countertop, check the bottom sweep of the shower door, and look at the ridge and eave shingles after a windy week. That assessment costs nothing and tells you whether you’re looking at a repair or a replacement.
CWS Parts & Our Repair-vs-Replace Approach

For CWS cabinets and shower enclosures, we prefer OEM hinges, sweeps, and glass gaskets. Aftermarket parts often have mismatched screw patterns that require drilling new holes, and weaker materials that fail faster than the part they replace. For roofing, we’re more flexible: CWS-branded architectural shingles are typically produced by major manufacturers, so when CWS supply is delayed, a qualified equivalent may be the right call – provided you approve it in writing and the warranty situation is clear. We don’t stock CWS parts locally. Every part is sourced per job, which means the right part for your model rather than whatever fits.
Repair is usually the smart call for cabinet hardware and shower seals. Replacement makes sense when water damage has compromised a cabinet box, when a shower enclosure has structural issues, or when roof shingles are near end-of-life. We tell you which one you’re facing and why. Call (833) 620-6162 to schedule a free estimate.
Our CWS Service Process – Step by Step
- 1
Diagnosis. We inspect the CWS product, identify the failure mode, and photograph it. For cabinets, that means checking hinge plates, screw anchoring, and face frame alignment. For showers, the sweep, gaskets, and hinge plates. For roofing, the deck, flashing, and nail pattern.
- 2
Written scope and change orders. You get the repair or install scope in writing, with parts identified. Any price change arrives as a written change order before work happens. No surprise invoices.
- 3
Repair or installation. For cabinet work, we reinforce stripped holes with hardwood dowels or threaded inserts and upgrade hinges where the door weight calls for it. For shower work, OEM sweeps and gaskets go in with the hinge plates re-aligned. For roofing, enhanced nailing patterns and ridge caps go down to spec. Permits pulled where Fremont requires them.
- 4
Test and inspection. Cabinets cycle through a full open-close run. Showers get a water test at the hinge side and curb. Roofs get a nailing and flashing check before the inspection sign-off.
- 5
Warranty and follow-up. The 90-Day Done Right Promise goes on the contract in writing. If something’s off, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterCWS Products We Service & Install in Fremont
We work with CWS shaker-style kitchen cabinets (solid wood face frames, plywood boxes), CWS semi-frameless and framed shower enclosures (tempered glass, aluminum tracks), CWS 30-year architectural shingle roofing systems, and CWS vanity cabinets with quartz or granite tops. Our CWS work on full kitchen remodeling, walk-in shower and tub-to-shower conversion, bathroom vanity installation, and roof replacement and repair is where most of that expertise lands. Fremont’s housing stock – from 1950s Eichler-style ranches to newer Warm Springs townhomes – means we see the same CWS failures in different vintages, which sharpens the diagnosis.

We Also Service These Brands
We’re not a single-brand shop. Our crews also work with KraftMaid and Cambria in kitchens, Silestone in countertops, and Kohler in bath fixtures. When a CWS line isn’t the right fit for your project, or a mixed set of products is already installed, we can service and match across brands without pushing you toward a replacement you don’t need.
FAQs – CWS Construction Service in Fremont

No. We’re an independent CWS service provider, not affiliated with or authorized by CWS. We install and service CWS products using OEM-compatible parts and warranty-safe practices, but any manufacturer warranty claim runs through CWS directly. Call (833) 620-6162 if you want to know how that affects your specific situation.
Yes, for cabinets and shower enclosures we use OEM-compatible hinges, sweeps, and gaskets because aftermarket versions often have mismatched screw patterns and weaker materials. For roofing, CWS-branded shingles are typically made by major manufacturers, so we may recommend an equivalent quality shingle if CWS supply is delayed – only with your written approval. Call (833) 620-6162 to discuss your part needs.
Cabinet hinge repairs and shower sweep replacements are typically done in a single visit. Roof repairs run one to two days depending on scope. Full replacement jobs are scheduled based on material lead times and inspections. We give you a written timeline before work starts. Call (833) 620-6162 for a project-specific estimate.
We cover CWS shaker-style kitchen cabinets, semi-frameless and framed shower enclosures, 30-year architectural shingle roofing, and vanity cabinets with quartz or granite tops. If your CWS model isn’t listed, call (833) 620-6162 – if we can’t service it, we’ll say so.
Not if it’s done correctly. We use OEM-compatible parts, avoid drilling new holes in sealed frames, and document what was installed. That keeps your manufacturer coverage intact where applicable. If a repair would affect a warranty claim, we tell you before proceeding. Call (833) 620-6162 for a free second opinion on any written estimate.
How much does CWS construction cost in Fremont?
| Service | Price Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
Fremont’s hard water, seismic requirements, and mixed housing vintages can shift a job toward the higher end. Every price change arrives as a written change order before work proceeds. Call (833) 620-6162 for an exact quote – estimates are free.
Book Your CWS Service in Fremont, CA
Whether it’s a stripped hinge on a CWS shaker door, a leaking shower sweep, or a roof that needs attention before the first wet storm, we’re ready to take a look. We’re an independent CWS service provider with a live person answering the phone, written quotes upfront, and the 90-Day Done Right Promise on every job. Call (833) 620-6162 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Fremont.












