







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fremont Homeowners Choose Unilock Construction
Barrett & Sons Construction Fremont provides independent Unilock construction service across Fremont, CA: paver driveway installation, paver patio installation, driveway replacement and repair of the hardscape systems that are already in the ground. What makes our Unilock work different is that the crew reading your project knows the actual profile dimensions, joint sand requirements and edge-restraint details instead of treating the block like generic concrete. Our technicians have up to 28 years of experience, and we’re licensed, insured and bonded.

We work with Unilock hardscape systems every season – pavers, retaining wall blocks and permeable interlocking units. To be clear and fair: we’re an independent Unilock contractor, not trained, certified or endorsed by Unilock. We install and repair their products to the specification the manufacturer and local code require. Call (833) 620-6162 for a free estimate.
Why Fremont Is Its Own Unilock Market
Fremont grew by absorbing five separate towns – Mission San Jose, Centerville, Irvington, Niles and Warm Springs – and each one kept its own original street grid, lot pattern and housing era. For a hardscape crew, that means five different submarkets with five different vintages and permit histories. The infill lots in Irvington and Centerville tend to be tight, with driveways running between mature trees and a neighbor’s fence line. Warm Springs is newer, denser, and often came with permeable hardscape requirements attached at plan check. And the Mission foothills sit in the rain-shadowed valley, where hot dry summers and cool wet winters drive concrete, pavers and wall blocks through a hard wet-dry cycle every year. The Hayward Fault trace also runs through the Mission district, so structural work there carries seismic detailing that a lot of Bay Area hardscape contractors never have to think about. None of that changes how a paver looks on day one. All of it changes how it looks in year twelve. Call (833) 620-6162 for a free estimate.
Why Trust Barrett & Sons Construction Fremont for Your Unilock Construction?

Unilock pavers and wall units aren’t a product you learn on a customer’s driveway. Brussels Block, the Brussels Dimensional System, Uni-Stone and the older Uni-Stone II-era profiles sitting in many Fremont driveways each have their own thickness, dimensional tolerance and bedding requirements. The Pisa2 and Thornbury wall lines have specific unit weights, connection pins and geogrid attachment points. Getting those details right is the difference between a wall that holds and a wall that leans.
We use genuine matching Unilock product on repairs, and where a matching profile isn’t available we isolate the repair in a border or soldier course instead of blending an off-brand unit into the field. That’s a warranty-safe practice on purpose – color and dimensional lots vary by year, and a mismatched block on a face-up retaining wall or a driveway field shows from the street.
Every eligible job gets permits pulled and inspections signed, because the permit inspector works for you, not for us. Every scope change arrives as a written change order before work happens. And the written 90-Day Done Right Promise sits on every contract: if it’s not done right, you make one call and we come back. Call (833) 620-6162 for a free estimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Fix in Fremont
These are the calls that actually come in, and what’s usually behind them.
- Joint sand washing out of Brussels Block on sloped Fremont driveways. The blocks shift, the edge lines wander, and the last row before the garage heaves. The sand leaving is a symptom. The cause is base or edge restraint, almost every time.
- White powder on grey Uni-Stone pavers. Efflorescence and salt bloom from the Bay Area wet-dry cycle. Owners read it as a defective product. It’s mineral migration from moisture moving through the paver, and it’s a drainage and moisture question more than a block question.
- Pisa2 and Thornbury walls settling or bulging at the top. Almost always the same story: the geogrid, drainage gravel and filter fabric behind the wall were value-engineered out. A wall with no drainage has nowhere for water to go but out through the face.
- Permeable paver joints clogging with fines and clay runoff. Eco-Optimized units on driveways that had to meet Bay Area stormwater treatment rules pond instead of infiltrating within a few years when the joints load up. Fines and clay are the enemy, not the block.
- Older Uni-Stone II-era driveways with sunken garage aprons. A ten- to fifteen-year-old field that’s lost its bedding sand and edge restraint is a base problem. The pavers themselves are usually still good.
Unilock Parts & Our Repair-vs-Replace Approach

Unilock pavers and wall units should be repaired with genuine matching product. Color and dimensional lots vary by year, so a mismatched aftermarket block shows immediately on a face-up wall or a driveway field. We source product for each job rather than claiming local stock – we don’t keep a yard of Unilock, and we won’t pretend to.
Where a matching Unilock profile isn’t available, we isolate the repair in a border or soldier course rather than blending an off-brand unit into the field. We replace a whole field only when the base or the wall’s structural section has actually failed. That’s a real dividing line, not a sales line, and it’s the same standard on a $350 patio repair and an $18,000 driveway.
A classic call is a ten- to fifteen-year-old Brussels Block or Uni-Stone driveway where the joint sand has washed out and the last row before the garage has heaved or sunk an inch or two. In almost every case the pavers themselves are fine – the failure is underneath, in a base that was too thin, didn’t get compacted in lifts, or lost its edge restraint and drainage. A qualified installer pulls the affected field, re-establishes a compacted aggregate base with proper slope away from the slab, resets the units on fresh bedding sand, re-sands the joints and re-sets or replaces the edge restraint rather than just sweeping sand back in. Call (833) 620-6162 to set up a free estimate.
Our Unilock Service Process – Step by Step
- 1
Diagnosis. We pull a sample unit or two and check the base depth, compaction and edge restraint. Joint sand loss and efflorescence get traced to moisture and base, not assumed to be product failure.
- 2
Written scope and change orders. The repair or install gets priced before work starts, and any change that touches scope arrives in writing first.
- 3
Permits where required. Permeable hardscape, retaining walls over code height thresholds and structural elements get permits pulled and inspections signed.
- 4
Repair or install. Genuine matching Unilock product, compacted base in lifts, proper drainage and filter fabric behind walls, edge restraint re-set or replaced.
- 5
Test and re-sand. We check slope, drainage and joint sand before we leave, and we confirm the field doesn’t pond.
- 6
90-Day Done Right Promise. Written on the contract. If something’s not right, one call brings us back.
Unilock Products We Service & Install in Fremont
We work with Brussels Block and the Brussels Dimensional System, Uni-Stone and the older Uni-Stone II-era profiles, Pisa2 and Pisa retaining wall units, Thornbury and Beacon Hill wall lines, and Eco-Optimized permeable pavers – Eco-Priora and similar – which show up on a lot of Fremont driveways that had to meet Bay Area stormwater treatment rules. The sub-services owners call us for most are paver driveway installation, paver patio installation and full driveway replacement. We also handle driveway sealing to protect the joints between full reseals.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
We’re not a single-brand shop. Alongside Unilock hardscape, we install and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures – names you can look up rather than mystery brands off a van. If your project touches more than the driveway, one crew and one set of written change orders can cover the whole scope.
Unilock Pricing in Fremont
These are the ranges we work to in the Fremont market. Every job gets a written line-item quote, and every price change arrives as a written change order before work happens.
| Service | Typical Fremont Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
FAQs – Unilock Construction Service in Fremont
No. We’re an independent Unilock contractor, not trained, certified or endorsed by Unilock. We install and repair their products to the specification the manufacturer and local code require, and we don’t represent ourselves as a Unilock dealer or authorized installer. Call (833) 620-6162 if you want the specifics on any product.
Yes, we use genuine matching Unilock product on repairs. Color and dimensional lots vary by year, so a mismatched block shows immediately on a face-up wall or a driveway field. Where a matching profile isn’t available, we isolate the repair in a border or soldier course rather than blending an off-brand unit into the field. Call (833) 620-6162 for a free estimate.
Joint resanding and edge-restraint work on a driveway run is usually a day or two; a full paver driveway installation or replacement typically runs several days to a couple of weeks depending on square footage and base conditions. Permits, where required, add to the timeline. We give you the schedule in writing before we start. Call (833) 620-6162 for a free estimate.
Brussels Block and the Brussels Dimensional System, Uni-Stone including older Uni-Stone II-era profiles, Pisa2 and Pisa retaining wall units, Thornbury and Beacon Hill wall lines, and Eco-Optimized permeable pavers such as Eco-Priora. If you’re not sure what’s in your driveway, we can identify it on site. Call (833) 620-6162 for a free estimate.
It shouldn’t, if the work is done to the manufacturer’s specification and local code. Using genuine matching product, correct bedding sand, compacted base and proper edge restraint is what keeps a repair warranty-safe. We flag anything that would put a manufacturer warranty at risk before work starts. Call (833) 620-6162 for a free estimate.
Paver driveway installation in Fremont typically runs $7,000 – $18,000, paver patio installation runs $3,500 – $11,000, driveway replacement runs $5,000 – $14,000, and driveway sealing runs $250 – $700. Repair of washed-out joints or a settled apron usually lands far below a full install once we’ve checked the base. Call (833) 620-6162 for an exact quote – estimates are free.
Usually, yes, if a current or close-dated lot is available. Color and dimensional lots shift by year, so we check the batch before promising a match. When a true match isn’t available, we isolate the repair in a border or soldier course so a mismatched block never sits in the middle of the field. Call (833) 620-6162 for a free estimate.
Almost never. White powder on grey Uni-Stone and similar pavers is efflorescence and salt bloom from the Bay Area wet-dry cycle – mineral migration, not product failure. The fix is usually drainage and moisture control, not replacement, and it often clears with the right cleaning and a joint-sand approach that doesn’t trap water. Call (833) 620-6162 for a free estimate.
Not at full capacity. Permeable joints clog with fines and clay runoff, so the driveway ponds instead of infiltrating – the block is fine, the surface is loaded. Joint cleaning and re-aggregate restores infiltration in most cases; if the reservoir base has failed, the field comes up. Call (833) 620-6162 for a free estimate.
Because the geogrid, drainage gravel and filter fabric behind it were value-engineered out. Water with nowhere to go pushes out through the wall face, and the units settle or bulge. The repair is a proper reconstruction of the reinforced section and drainage, not a cosmetic patch on the face. Call (833) 620-6162 for a free estimate.
Sometimes, if the slab is sound, correctly sloped and has the room for edge restraint and drainage. Where the slab is cracked, settled or pitched toward the garage, overlaying just moves the problem up an inch. We check the slab and drainage first and tell you straight. Call (833) 620-6162 for a free estimate.
Book Your Unilock Service in Fremont, CA

If your Unilock driveway is losing sand, your Pisa2 wall is leaning, or your permeable pavers are ponding, get a straight answer and a written line-item quote. Call (833) 620-6162 for a free estimate on Unilock construction in Fremont, CA – a live person answers the phone around the clock.
Written by the team at Barrett & Sons Construction Fremont.












