







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Master Halco Construction in Palo Alto, CA | Barrett & Sons Construction Fremont
We provide independent Master Halco service across Palo Alto, and the one thing that sets our work apart here is that we plan every fence and addition around the city’s tree-ordinance setbacks and clay-soil conditions before a single panel gets ordered. Master Halco makes steel, aluminum, and vinyl fence and rail systems, and we install them to the manufacturer’s published specs. We’re an Master Halco service provider, not the manufacturer and not authorized by them. Whether your project runs through 94301 or 94303, you get a written scope, written allowances, and pricing you can check line by line. Call (833) 620-6162 to set up a free estimate.

Palo Alto is a built-out, high-value city. Almost nothing here is new ground-up construction. Nearly every project is a remodel, a second-story addition, an ADU, or a garage conversion, and every one of them runs through a rigorous planning and building department with its own Municipal Code amendments and a strong historic-review culture. That changes the work. Fence lines get moved to make room for footings, and tree root zones reshape post spacing before anything else happens.
Why Palo Alto Residents Choose Us for Master Halco Service

We know Master Halco systems because we install them in the field, not from a catalog. That means we can tell the difference between an ornamental steel rack meant for a flat suburban lot and one that has to be set on a slope behind an Eichler in midtown. The Premier vinyl privacy line, the Monarch-style welded steel panels, the aluminum residential runs and gates, the steel chain link with privacy slats: each one has its own footing, racking, and hardware requirements, and getting those right the first time is the whole job.
Our technicians have up to 28 years of experience, and every one of them is background-checked and carries our name. We use Master Halco OEM panels, posts, and hardware where the system is proprietary. Mixing aftermarket rails into an OEM panel voids the wind-load and racking performance the panel was engineered for, and that’s a detail that shows up two winters later. For generic chain link and standard fittings, quality aftermarket parts are fine and cheaper. We’ll tell you which is which.
The other thing Palo Alto homeowners tell us matters: a live person answers the phone, 24 hours a day, and every price change comes as a written change order before work starts. No surprise invoices.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Master Halco Construction Problems We Solve in Palo Alto
- Vinyl posts heaving and leaning. Palo Alto’s dry summers and wet winters make clay-heavy soils swell and shrink, and vinyl privacy posts work loose year after year. The panel rails usually crack at the fastener holes before the picket itself fails. Re-setting the posts on proper footings fixes the cause; replacing panels alone doesn’t.
- Steel and aluminum gates binding on sloped lots. Eichler and Craftsman lots slope, and a panel installed without stepped racking will bind at the gate within a season. We re-rack the run and touch up the powder coat at the cut ends, which is where installers who skip the touch-up leave the corrosion starting point.
- Corrosion at the ground line. Chain link and steel posts rust where the rainy-season saturation sits against the fence, especially where irrigation or a downspout dumps water into the same spot. Moving the water and sleeving the post is often the whole fix.
- Root-zone conflicts with protected trees. Fence lines run inside the protected canopy, posts get shifted or set shallow, and the panel racks out of plumb the first season. That’s really a tree-ordinance problem dressed up as a fence problem.
- Fence lines in the way of additions and ADUs. When a rear addition or garage conversion starts, the existing Master Halco run often sits exactly where the new footing line has to go. We plan the tie-in before demolition, not after.
Master Halco Service in Palo Alto: What Local Conditions Mean for Your Equipment
Here’s the local fact that changes how Master Halco work plays out in Palo Alto and wouldn’t be equally true in Mountain View or Sunnyvale: the city’s tree-protection ordinance can require a city arborist sign-off before any excavation near a protected oak or redwood. A first site visit here often starts with measuring trunk distances, not checking the foundation. That single step reshapes post spacing and footing depth before any Master Halco panel is ordered. On a lot in Professorville or downtown, where Craftsman and Spanish Colonial bungalows sit under mature canopy, that can mean a fence line moves two feet and post spacing tightens from eight-foot centers. Both of those flow straight back into the panel count and cost. If your project involves an addition or a garage conversion, the tree review runs in parallel with your permit review, and we schedule around Palo Alto’s own inspection timelines rather than a generic Bay Area process.
Master Halco Models & Products We Service in Palo Alto
We work on the Master Halco lines you’ll actually find on Palo Alto properties: the Premier series vinyl privacy fencing, Monarch-style welded ornamental steel and iron panels, aluminum residential fencing and gates, and steel chain link with privacy slats. Parts are sourced per job. We don’t claim local stock, and we won’t tell you a panel or post is sitting on a shelf when it isn’t. The plan is simple: confirm the exact system and model, order OEM components where the system is proprietary, and use quality aftermarket parts only where they don’t compromise the engineering. Hardware, caps, hinges, and latches get matched to the run so the gate swings the way it did the day the fence went in.
On a typical Palo Alto lot, a homeowner planning a rear addition or garage conversion discovers the existing fence sits where the new footing line or tree root zone has to go. The usual cause is a fence installed years earlier without regard to the protected-tree setback, leaving posts shallow or racked on a slope. A qualified local pro measures trunk distances first, gets the arborist review if needed, then re-racks or re-sets the panels on proper footings and touches up cut steel ends before the addition framing goes up.
See the difference
Before
After
Before
After
Before
AfterMaster Halco Service Pricing in Palo Alto

What drives the number is the size of the run, whether posts get re-set or reused, whether the lot slopes, and whether tree-ordinance review is in play. A free estimate includes a written scope, line-item pricing, and any allowances spelled out in writing. We don’t quote a number on the phone and hand you a different bill at the door.
| Project | Price Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
Every eligible job includes permits pulled and inspections signed, and every completed job is backed by the written 90-Day Done Right Promise. Call (833) 620-6162 for an exact quote. Estimates are free.
Serving Palo Alto, CA – Our Local Coverage Area
We serve Palo Alto and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Master Halco Construction in Palo Alto
Often yes. Palo Alto’s tree-protection ordinance can require city arborist sign-off before excavation inside a protected tree’s root zone, and that review typically comes first. A pro measures trunk distances on the first visit, then applies for the review if the fence line falls inside the protected area. Call (833) 620-6162 and we’ll walk your line and check the distances with you.
Yes. Welded steel and aluminum panels can be racked or stepped to follow a grade change, and on an Eichler or Craftsman lot that slope is the deciding factor in how the run gets set. Panels installed flat on a slope bind at the gate and the powder coat fails at the cut ends. Stepping the run keeps the gate swinging. Call (833) 620-6162 for a free estimate on your grade.
Clay-heavy soils here swell and shrink between wet winters and dry summers, so vinyl posts heave and the rails crack at the fastener holes instead of the picket. It’s a footing problem showing up in the panel. Re-setting posts on proper footings stops it. Call (833) 620-6162 and we’ll check your posts before more panels fail.
Sometimes. A second story or an ADU changes the footing plan and sometimes the protected-tree setback, and an older fence line often sits exactly where the new work has to go. We plan the tie-in during design, not demolition. Call (833) 620-6162 for a free estimate that includes the fence side of the project.
Repair the section if the posts are sound and the corrosion is localized; replace the run if posts are heaving or the powder coat is failing across multiple panels. Ground-line corrosion from rainy-season saturation is the common case in Palo Alto. Call (833) 620-6162 and we’ll give you the straight answer.
Service Areas Near Palo Alto
We work across the Palo Alto service area, including 94301, 94303, 94304, and 94309. For Master Halco fence, addition, and garage conversion work, we also cover Stanford, East Palo Alto, Mountain View, Sunnyvale, Santa Clara, Fremont, Newark, and Union City.
Book Your Master Halco Service in Palo Alto Today
A live person answers the phone around the clock, and the estimate is free. We pull the permits, sign the inspections, and back every completed job with the written 90-Day Done Right Promise. Whether you’re re-setting a leaning Premier vinyl run or moving a fence line for an ADU, call (833) 620-6162 to schedule your free estimate in Palo Alto.
Written by the team at Barrett & Sons Construction Fremont.












