A Barrett company - serving Fremont, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
Schluter · Fremont

Schluter Roofing in Fremont, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Fremont
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A wood double vanity with two mirrors after a bathroom remodel
New painted shaker cabinets with an organized deep drawer
A remodeled kitchen with a waterfall island and wood cabinets
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
A new multi-panel patio door opening a kitchen to the patio
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Roofing: The Fremont Owner’s Guide

Schluter makes a name for itself in tile and waterproofing, not in shingles. The “Schluter system” most Fremont roofs actually carry is KERDI, DITRA, or KERDI-BOARD used on tile details, flat roof transitions, parapet walls, and roof decks where tile meets waterproofing. If a Schluter membrane, drain, or edge profile on your roof has let go, you’ll usually find out the hard way: a brown ring spreading on a ceiling, a damp smell in the attic, or a tile edge that pops loose after a hard rain. Installed pricing for the membrane work that ties these systems in runs $400 to $1,800 for a localized repair and $8,000 to $20,000 when the failure is tied to a full tile roof replacement. We’re an independent contractor, not affiliated with Schluter, so when we tell you what a part costs we aren’t protecting a brand margin.

professional home additions & adu service in Fremont, CA

Call (833) 620-6162

Roofing repairs around Fremont, CA get scheduled during our normal business hours. We answer the phone live, 24 hours a day, and we’ll get you a written scope before anyone climbs a ladder.

Which Schluter Models This Applies To

A tile setter installing wall tile in a shower

Schluter’s roofing-adjacent parts break into four families, and matching the right one matters because the specs don’t interchange. KERDI is the sheet membrane and goes on the flat or low-slope deck. KERDI-BOARD is the rigid foam backer with a waterproofed face, used on parapets and upstands. DITRA is the uncoupling membrane under tile, and DITRA-HEAT is the version with the heating cable grid. KERDI-LINE and the Schluter shower drains don’t belong on a roof at all, but homeowners routinely confuse them with roof drains, so check the label.

To identify what you have, pull a loose edge and read the printed membrane face: Schluter stamps the membrane type and width right on the sheet, most often 39-3/8 inches wide for KERDI rolls. If the printing is worn off, measure the thickness with calipers. KERDI runs about 8 mils, DITRA about 1/8 inch, and KERDI-BOARD 1/2 inch and up. Write those numbers down before you call anyone.

The OEM-versus-aftermarket call is different with Schluter than with, say, a GAF shingle. Schluter accessories (the KERDI-FIX adhesive, the KERDI-BAND sealing strip, the prefab corners) are cheap and unforgiving of substitutes. Generic band tape has a different fleece and won’t bond the same way in a wet Fremont winter. Use genuine Schluter there. The membrane itself and the drain hardware are where a quality equivalent is worth pricing, and we’ll show you both lines in writing.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Roofing Is Failing

  • A ceiling stain below a parapet or flat section. Water is getting past the KERDI lap or the KERDI-BAND seam. The membrane itself rarely fails; the lap does, which is the weak link on every membrane roof.
  • Tile lifting at the edge of a roof deck. The DITRA or mortar layer under the tile has sheared. A missing or badly keyed edge profile lets water wick under and the tile loses its grip.
  • Soft, hollow-sounding KERDI-BOARD on an upstand. The backer was installed with the wrong fastener or the face was punctured. Once the fleece is torn, the waterproofing is done.
  • Bubbled paint or efflorescence on the fascia. Water is sitting behind the membrane and finding the drywall or wood below. In Fremont’s marine-layer climate, a slow leak can hide for two or three winters before it shows inside.
  • A stained or damp area around a roof drain. The drain body wasn’t bedded in KERDI-FIX or the flange is loose. That’s a gasket-level failure, not a whole-roof job.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A single-story rear room addition with tall windows and a new patio

Repairing the Schluter detail on a Fremont roof lands in a few predictable bands. A localized membrane seam repair with genuine KERDI-BAND sits in the $400 to $1,800 range. Replacing a failed drain assembly or a run of KERDI-BOARD on a parapet fits the same band. If the leak has been running long enough to rot the deck under it, the repair turns into roof replacement, which runs $8,000 to $20,000 here. Tile roof work specifically runs $600 to $2,500 for the repair portion, and metal roofing, if that’s what you’re replacing, runs $15,000 to $40,000.

Scope Fremont Price Range
Membrane seam / detail repair $400 – $1,800
Drain assembly replacement $400 – $1,800
Tile roof repair (tile section) $600 – $2,500
Full roof replacement (if rot is found) $8,000 – $20,000
Metal roof installation $15,000 – $40,000

What drives the spread: how much deck has to come up, whether the failure is one seam or the whole field, and whether the permit inspection requires a full re-cover. Every price change comes to you as a written change order before a nail moves, so the number on the invoice is the number on the estimate. Every eligible job gets permits pulled and inspections signed, and the work is backed by our written 90-Day Done Right Promise.

DIY or Call Us?

You can safely check a few things yourself. Pull a loose membrane edge and photograph the printed label. Measure the sheet thickness. Look at the attic from the access hatch with a flashlight for water stains. That’s the extent of it.

Here’s the part we want to be blunt about: this is a roof. It’s a fall hazard, and in Fremont the marine layer keeps a wet tile or membrane surface slick for most of the morning. Waterproofing laps have to run the right way (over, not under) and have to be sealed with the correct adhesive and a roller. Get it wrong and you’ll have a leak that didn’t exist before, in a spot you won’t find until the next rain. We don’t hand out step-by-step instructions for membrane seams on a pitched roof, and no honest roofer should. Call us at (833) 620-6162, and a live person picks up day or night.

FAQs

A new clay tile roof

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A stone counter, tile backsplash and open shelf after a kitchen remodelA garage converted into a guest room and home officeNew architectural shingles with a clean valleyA new casement window over a kitchen sinkA new white vinyl privacy fence with a double gateA new stained cedar privacy fence

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Barrett in Fremont

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Fremont team

A local vetted partner works across Fremont and the towns around it, to the same written standard as every Barrett job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 620-6162
Local Service Coverage

Request a Free Estimate in Fremont

Tell us what you need - Barrett & Sons Construction Fremont responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch