A Barrett company - serving Fremont, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
Schluter · Fremont

Schluter Driveway & Pavers in Fremont, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Fremont
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A new multi-panel patio door opening a kitchen to the patio
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Driveway & Pavers: The Fremont Owner’s Guide

Schluter driveway and paver profiles are aluminum and stainless edge and transition pieces that hold a paver or driveway edge line straight, keep the bedding sand from washing out, and give the surface a finished border. In Fremont, a driveway edge strip or paver border profile installed with the pavers runs within the overall paver driveway installation range of $7,000 – $18,000 for a full driveway; isolated replacement of a damaged profile or paver border typically lands far below that, and we schedule those as planned work, not same-day. Schluter itself makes no driveway-specific paver line, so what you’re actually buying is a compatible edge trim or paver profile matched to your build, and getting that match right is the whole job. Owners usually find out something failed after a winter of rain when sand starts pushing out at the curb line, a border paver lifts an eighth of an inch, or the metal edge pops free at the driveway apron where the car tire catches it.

Roofers removing old asphalt shingles using a waste chute into dumpster in Fremont, CA

Call (833) 620-6162

Which Schluter Models This Applies To

A tile setter installing wall tile in a shower

The honest answer, and the first thing we tell a Fremont homeowner, is that Schluter’s core catalog is tile and flooring transition profiles: Schluter-RENO-TK, RENO-U, RENO-V, SCHIENE, and the TREP and DIADEC lines. Those are the profiles that show up at paver borders, garage-to-driveway thresholds, and step nosings on Fremont hardscape jobs. If your edge piece is stamped with a profile name, start with that. If there’s no label left, measure the reveal depth and the overall width in millimeters: an 11 mm and an 8 mm profile are not interchangeable, and a 1/16-inch misread is why half the border trims we replace didn’t sit flush in the first place.

The OEM-versus-aftermarket decision matters here more than owners expect. The Schluter-branded aluminum profile is genuinely better stock, anodized, and holds its finish; a generic big-box edge trim is usually thinner and pitting within two Fremont summers. But a quality anodized aftermarket trim from a real hardscape supplier is a reasonable match when the profile is buried and invisible. What we won’t do is slide a lesser piece into a spot you can see every day. We’re an independent installer, not affiliated with Schluter; we buy whatever your build calls for and we write the part and the price on the estimate before we start.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Driveway & Pavers Is Failing

  • Sand washing out at the edge after rain. The profile has loosened from its bedding and the joint is now a channel for water. Common along driveway aprons in Fremont where runoff concentrates.
  • Border pavers lifting or rocking underfoot. The edge restraint gave, so the pavers have nothing holding the field in place. Left alone, the movement walks inward a foot or more within a season.
  • The metal edge catches a tire. The profile lifted at the transition to the apron or garage. That’s a trip hazard and a tire-cutter, and it’s the failure we see most often.
  • Visible pitting or chalky white corrosion on the trim. Aluminum that’s been wet and buried without drainage. Cosmetic at first; it turns into a broken profile once it thins.
  • A visible gap at the garage threshold. The threshold profile pulled away from the slab. That gap funnels Fremont rain water straight toward your foundation.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

An open kitchen and dining area after a remodel

Here’s how the numbers actually break down, and these are consistent with the pricing we publish across every Fremont page:

Work Typical Fremont range
Full paver driveway installation (includes edge profiles) $7,000 – $18,000
Driveway replacement $5,000 – $14,000
Isolated border profile / trim replacement Quoted on site, far below full-driveway ranges

What drives the range: linear footage of edge, whether the bedding has to be re-set, and whether the profile is exposed or buried. Every material and every allowance is in the estimate before the first paver moves, and any change comes as a written change order, never a surprise invoice. Permits get pulled and inspections signed where the job requires it. The work is backed by our written 90-Day Done Right Promise: if it isn’t right, one call brings Tom back. Our technicians have up to 28 years of experience on hardscape and edge work.

DIY or Call Us?

At a tilt-up, here’s what you can safely check. Confirm whether the moving piece is an edge profile or a loose paver. Look for water paths around the failed spot. Take a photo and a measurement. Those three things make our estimate faster.

Where DIY goes sideways is the re-set itself. A paver border profile that looks like a 20-minute trim swap is usually a bedding and compaction problem underneath, and if you reset the paver over loose base it rocks again by the next rain. Setting it right means pulling a border line, re-laying base, and compacting to a real edge. That’s not dangerous work, it’s just work that gets done wrong on a Saturday and redone by us in the fall. If the paver border is at your garage threshold and the slab is involved, that’s structural and gets a real look, not a bead of adhesive.

Call (833) 620-6162 and a live person answers, any hour. Estimates are free, and the No Trip Charge Inside the County and the Free Second Opinion on Any Written Estimate both apply.

FAQs

A galley kitchen opened up to the dining room with a new peninsula

How long does a Schluter paver edge profile last in Fremont? A properly set anodized aluminum profile against gravel or concrete edge restraint commonly holds 10 – 15 years in our climate, and a buried profile longer. The killers here are water trapped against untreated aluminum and a base that lets the paver rock, which flexes the profile until it snaps.

Can it be repaired instead of replaced? Yes, often. If the profile itself is intact and only the bedding loosened, we can reset it. If the metal is pitted through or cracked, it gets replaced; a patched profile fails again at the same spot. Call (833) 620-6162 and we’ll tell you which one you’re looking at, free.

How long does the swap take? A single border profile or trim replacement is usually a half-day to a full day depending on how much edge line has to be reopened. A full border run with bedding and compaction goes longer. Planned work, scheduled and done in one visit, not a same-day dispatch.

How do you source the part? By measurement first: profile name or reveal depth and width, then a match to the right anodized aluminum trim through a real hardscape supplier. We quote the part and the labor as separate line items so you can see what you’re paying for. Call (833) 620-6162 for a free estimate.

When you’re ready, call Barrett & Sons Construction Fremont at (833) 620-6162 for a free estimate. We pull the permits, put the scope and every allowance in writing, and back the finished work with our 90-Day Done Right Promise. The permanent 10% Senior & Veteran discount applies, and the Free Second Opinion on Any Written Estimate is yours whether you hire us or not. We install KraftMaid, Cambria, and Silestone in the home, and the same depth goes outside on your driveway and pavers.

Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new roof with clean valleys and new flashingNew double-hung windows in a dining roomA new front yard fence with a matching gateA new paver pool deckA remodeled family room with new windows and a window seatA standing-seam metal roof over a covered porch

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Barrett in Fremont

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Fremont team

A local vetted partner works across Fremont and the towns around it, to the same written standard as every Barrett job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 620-6162
Local Service Coverage

Request a Free Estimate in Fremont

Tell us what you need - Barrett & Sons Construction Fremont responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch