







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Fremont Owner’s Guide
We install and repair Boral clay and concrete roof tile across Fremont, and a typical repair runs $400 – $1,800 while a full Boral tile roof replacement falls in the $8,000 – $20,000 range for most Fremont homes. Spring is when we get most of the calls. Boral tile is heavy and built to outlast the house, so when something gives, it’s usually a single cracked field tile, a slipped hip piece, a failed underlayment seam, or a ridge mortar joint that has finally let go after a run of wet winters and dry summers. Owners find it the same way: a brown stain spreading on a bedroom ceiling, a tile in the driveway after a wind event, or a roofer who walked the roof and pointed at a hairline crack you can’t see from the ground.

Which Boral Models This Applies To

Boral makes clay and concrete tile in a wide spread of profiles, and the repair part depends entirely on which one is on your roof. The common residential lines we see around Fremont are the flat and low-profile concrete tiles (Boral’s Saxony and Madera-style profiles), the high-profile Spanish S-tile, and the clay flat tile used on some of the older ranch homes near the Mission district. Matching gets tricky because Boral has changed color batches and discontinued a few profiles over the years, so a “same model” tile from a current run won’t always match the 20-year-old tile already on your roof.
The reliable way to identify your part is to pull one broken field tile up carefully, measure its length, width and thickness in inches, and photograph the underside stamp. Boral tiles carry a mold mark on the back with the profile name and sometimes a run code. That stamp is your part number.
On the OEM-versus-aftermarket decision: for exposed-weather tiles and matching color, an OEM Boral replacement is worth the cost because it matches the profile and the fire rating. For hidden repairs like underlayment or hip-and-ridge, a good quality matching-profile tile from a compatible manufacturer often does the job at lower cost and without a color mismatch that only shows up close. We tell you which side of that line your repair falls on before we quote.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Roofing Is Failing
Boral tile doesn’t fail all at once. It fails one piece at a time, and the first signs show up long before water gets inside. Here’s what to watch for:
- Hairline cracks in field tiles. Freeze-thaw cycling and foot traffic cause it. A cracked tile lets water under the tile, where the underlayment has to absorb it. That underlayment is only good for so long.
- Slipped or displaced tiles after wind. Boral tile is fastened with nails or screws, and a loose fastener lets the tile slide. A slipped tile exposes the underlayment and creates a fast path for leaks.
- Crumbling ridge or hip mortar. The mortar joint on the ridge and hips cracks over time, especially after a dry summer followed by a wet winter. When it crumbles, ridge tiles get loose and can come off in high wind.
- Brown or yellow ceiling stains. This is the leak reaching your interior, which means water has been getting through for a while. It usually traces back to a failed underlayment seam or a broken tile above.
- Granule loss or surface pitting on concrete tile. Some Boral concrete profiles shed their surface finish over decades in Fremont’s sun. Pitting on its own doesn’t leak, but it tells you the tile is near the end of its useful life.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Boral tile roof repair in Fremont runs $400 – $1,800 installed for typical single-tile to small-section work. A full Boral tile roof replacement runs $8,000 – $20,000 for most Fremont homes, and the number climbs toward the top of that range when the roof is steep, when there’s old tile and underlayment to tear off and dispose of, or when you want a premium matching color.
Here’s what drives the range: the profile, the color match difficulty (discontinued colors cost more to source), the pitch of the roof, the number of tiles to replace, and whether the underlayment underneath needs to be replaced along with the tile. For a repair, most of the cost is in the matching tile and the two-man crew to safely access the roof and remove and reinstall a tile without cracking the neighbors.
Every quote we write is line-item: tile, underlayment if needed, labor, disposal. No lump sum. Any change to scope gets a written change order before we touch the roof. The work carries our 90-Day Done Right Promise, in writing on every contract. We’re an independent service provider, not affiliated with Boral; we source Boral and Boral-compatible parts from suppliers we’ve worked with for years.
DIY or Call Us?
There are a few things you can safely check from the ground. Grab binoculars and look for cracked, curled or missing tiles and crumbled ridge mortar. Look for staining on the ceiling inside. Look at the attic sheathing from underneath for water marks or soft spots. Write down what you find and shoot a couple of photos. That’s the point where DIY should stop.
Tiled roofs are genuinely risky to walk. Boral tile is heavy and brittle, and it cracks underfoot if you step wrong. A fall from a two-story roof is a serious injury, and we’ve seen homeowners crack three or four tiles fixing one, creating a bigger leak than they started with. The repair itself is one thing, but the safety and the matching are the hard part. Once you have your notes and photos, call (833) 620-6162 and we’ll walk you through what you’re looking at, quote the repair, and get the right tile in your hands.
FAQs

Boral clay and concrete tile is rated for 50 years or more, and in Fremont’s climate (mild, dry summers, wet winters) many Boral tile roofs outlast that. The tile itself outlasts the underlayment by a wide margin. Underlayment typically needs replacing every 20 to 30 years, and that’s what usually triggers a full roof replacement, not the tile.
Yes, a single cracked field tile can be replaced without touching the rest of the roof. We lift the surrounding tiles, set the new tile, and fasten it the same way the original was installed. If the crack is paired with a failed underlayment seam above it, the repair grows to include that section. A roof inspection tells you which one you’re facing.
A single-tile or small-section repair is usually a half-day job. A larger section with underlayment work runs one to two days. A full Boral tile roof replacement takes several days depending on roof size and access. Call (833) 620-6162 and we can give you the timeline for your specific roof.
We match by profile, dimensions and underside stamp. You bring us a photo of the broken tile and its backside mark, and we source from Boral suppliers who carry the current batches and discontinued stock. If the exact Boral color or profile is no longer available, we’ll tell you before we quote and offer a compatible match.
No. The quote is what you pay. If we pull a tile and find rot or a failed underlayment seam we couldn’t see from the roof, we write a change order, show you the damage, and get your approval before we do anything extra. No surprise invoices at the end.
When a Fremont job requires a permit, we pull it and pass inspection. Tile roof repair and replacement rules vary by scope, and we’ll tell you plainly whether your job needs one. The permit inspector works for you, not for us.
If you’re not sure what’s on your roof or what it needs, call (833) 620-6162 for a free estimate. We’ll come out, get eyes on the actual Boral tile, and hand you a line-item quote with no pressure and no surprises. We also work with KraftMaid, Cambria and Silestone on interior projects, so if the roof repair turns into a bigger conversation, we can help there too.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












