







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Bathroom Remodeling: The Fremont Owner’s Guide
Boral bathroom remodeling in Fremont runs $9,000 – $28,000 installed for a full bath, with small bath remodels at $5,000 – $12,000 and tub-to-shower conversions at $3,500 – $10,000. We’re an independent contractor and not affiliated with Boral, but we install Boral tile and trim systems and the supporting fixtures that go around them. Calls are answered by a live person around the clock, and estimates are free.

Owners usually find the problem the same way. A grout line along the shower floor turns from tan to gray, then a tile edge feels loose under a thumb. Or they pull up the bath mat and see a hairline crack working its way across a floor tile. In Fremont’s older Mission San Jose and Irvington homes, that often traces back to the original pan or a membrane that was never installed under the tile.
Key Takeaways
- Full Boral bathroom remodel in Fremont: $9,000 – $28,000 installed.
- Small bath: $5,000 – $12,000. Tub-to-shower conversion: $3,500 – $10,000.
- Waterproofing under the tile is what fails first, not the tile itself.
- Every eligible job gets permits pulled and inspections signed.
- Price changes come as written change orders before any work moves forward.
Which Boral Models This Applies To

Boral makes two things most Fremont bathroom owners actually touch: porcelain and ceramic floor and wall tile, and cultured marble / solid surface vanity tops and shower surrounds. The tile lines sell under names like Boral’s porcelain and ceramic collections, and the vanity tops ship under solid-surface model numbers stamped on the underside. Compatibility matters because Boral porcelain tile comes in specific nominal sizes (12×24, 6×36, 24×48) and thicknesses that determine your substrate, your grout joint, and whether a linear drain will sit flush. If you’re replacing a single cracked tile, the first step is measuring the actual face dimension, not the box label. Boral tile can run slightly under nominal, and a 12×24 from one production run won’t always line up with a 12×24 from another.
For vanity tops, look under the sink cabinet for the manufacturer label and model number. Solid surface and cultured marble tops are cut to specific depth (usually 22 inches) and edge profiles, and a replacement needs the same cabinet width to land right. On the OEM-versus-aftermarket question: genuine Boral replacements match the original color and sheen exactly, which matters when half a floor stays. A quality aftermarket porcelain in the same size and finish can save money on a full tear-out, but never on a patch. If you’re also weighing vanities or counters in Fremont, we install KraftMaid cabinetry, Cambria, and Silestone alongside the Boral tile work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Bathroom Remodeling Is Failing
- Grout that turns dark and stays dark. That’s moisture trapped behind the tile, usually a failed pan or missing membrane, not just dirty grout.
- A hollow ring when you tap a tile. The tile has lost bond to the substrate. Once it debonds, water gets a path under the field.
- Loose or rocking floor tiles near the toilet or drain. Often a subfloor flex issue or water damage to the underlayment, common in older Fremont homes.
- Caulk at the shower corners peeling repeatedly. Movement, or water behind the wall. New caulk won’t fix the second one.
- A crack in a solid-surface vanity top around the drain. Age and thermal cycling. Cracks spread, and they catch water.
In Fremont, we regularly see shower failures tied to the dry summer and wet winter swing, which pushes a tired pan or an unsealed corner past what it can take. Once grout opens, it fails fast.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Bathroom remodel pricing in Fremont depends mostly on how much gets torn out and how the waterproofing gets rebuilt. Here’s what we quote:
| Scope | Installed Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
The low end of the full remodel range applies to a straightforward layout with standard tile sizes. The high end covers a moved drain, new framing, a linear drain, or a large-format Boral porcelain with a custom niche. Every estimate is line-item and written. Allowances appear on paper. Any change that touches the scope arrives as a written change order before a single nail moves. And every eligible job gets permits pulled and inspections signed, because the permit inspector works for you.

DIY or Call Us?
You can safely poke at this one. Tap tiles for hollow spots, check the caulk lines, look under the vanity for the Boral label, and take a photo of any crack with a tape measure next to it. What you shouldn’t do is rip out a shower pan or a tile substrate and try to redo the waterproofing on your own. Sitting showers and failing pans are where a weekend project turns into a rotted subfloor and mold behind the wall. A membrane that’s installed wrong looks fine for months and fails under the first wet season.
That’s where Tom Barrett and his sons come in. Barrett & Sons Construction has been owner-operated since 1998, upstairs and on the job, not a name on a call sheet. Scope in writing, allowances in writing, change orders in writing. Every job is backed by the written 90-Day Done Right Promise: if something’s not right, one call brings Tom back. Call (833) 620-6162 for a free estimate and we’ll price out the repair, the replacement, or the full remodel.
FAQs

A well-installed Boral porcelain tile floor holds up 20 to 30 years or more. What fails first is the waterproofing behind it, not the tile. A shower with a properly installed membrane and sealed corners lasts decades; one without a membrane starts showing failure within 5 to 10 years. Call (833) 620-6162 for a free assessment.
Sometimes, yes. A single cracked tile or a failed caulk line can be repaired without a full tear-out. A shower with a failed pan or no membrane behind the tile usually can’t. We’ll tell you honestly which one you have after a free look. Estimates are free, and we don’t push a remodel you don’t need.
A tub-to-shower or shower replacement typically takes a few days to a week or more depending on the tile, the drain, and whether the permit inspection adds a stop in the schedule. Every price change is in writing before work proceeds, and the scope is on the contract up front.
We match the Boral model, size, and finish from the manufacturer’s spec sheet and current product line, then order to the specific job. On a patch job we take a production-run match seriously, because a color drift on half a floor shows. You’ll see the sourcing and the price on the line-item estimate before you sign anything.
No trip charge inside the county. Free second opinion on any written estimate you already have. And a permanent 10% Senior & Veteran discount, every time, no fine print. Call (833) 620-6162 to schedule your free estimate in Fremont.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












