A Barrett company - serving Fremont, CA
A home with a brand-new roof and gutters at golden hour
Boral · Fremont

Boral Fence Installation in Fremont, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Fremont
New architectural shingles with a clean valley
A new roof with clean valleys and new flashing
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
A new casement window over a kitchen sink
A new white vinyl privacy fence with a double gate
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Fence Installation: The Fremont Owner’s Guide

Fence installation using Boral composite materials in Fremont typically costs $3,500 to $9,000 installed, depending on linear footage, height, and gate count. We handle the full job: setting posts to Fremont’s clay-soil specs, hanging panels square, and pulling the permit when your fence crosses a property line or exceeds height limits. Most Fremont owners discover the problem the same way: a post starts leaning after a wet winter, a panel sags at the top rail, or a gate that used to latch clean now drags on the concrete. By the time the second post wobbles, the original fasteners have usually corroded through or the footings were set too shallow for this soil. We’re an independent contractor, not affiliated with Boral, and we work with the material you’ve already got or can source the right Boral line to match.

Two construction workers installing a wooden cabinet in a kitchen in Fremont, CA

Call (833) 620-6162

Which Boral Models This Applies To

Boral’s composite fence line has changed names and profiles over the years, so matching the right panel and post cap matters more than most owners expect. The common residential profiles are the wood-grain composite panels and the capped composite series, and the tell is usually stamped on the post cap, the rail end, or a small label inside the gate frame. Measure your post spacing center-to-center before you order anything: Boral panels are cut for specific bay widths, and a half-inch mismatch at the post is the difference between a tight fit and a panel you have to shim. For older installations in Fremont, the OEM cap and rail profile may be discontinued, which is where a quality aftermarket equivalent makes sense. We don’t stock parts or carry them on a truck; we identify your exact profile, then source the match. If you’re also updating interiors, we install KraftMaid, Cambria, and Silestone, so one call can cover more than the fence line.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Fence Installation Is Failing

  • Posts leaning after rain. Fremont’s expansive clay soil swells and shrinks with the seasons, and a footing set too shallow or without proper gravel drainage will rock within a couple of wet winters.
  • Sagging top rails. A rail that bows between posts usually means the fasteners have backed out or the rail was never screwed to a blocking plate at the post.
  • Gate dragging or not latching. Gates take the most stress of any section, and a hinge post that’s shifted even a quarter inch throws the latch out of line; this is the symptom owners notice first.
  • Discoloration or chalking on panels. Boral composite holds color well, but prolonged UV exposure on an uncapped profile can chalk and fade unevenly, which is a material-grade issue rather than a cleaning problem.
  • Loose or missing post caps. Caps keep water out of the post core. Once one goes missing, moisture wicks down and the post fails from the inside, which you won’t see until the panel shifts.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Fence installation in Fremont runs $3,500 to $9,000 for a typical residential run. The range is driven by linear footage, fence height (6-foot is standard, 7-foot and taller needs a permit and may need a survey), gate count, and how much old fence has to come out first. Posts set in Fremont’s clay often need deeper footings and gravel drainage, which adds labor but prevents the lean you’re already dealing with.

What’s included in a written quote from us: post holes dug and set to depth, panels and rails hung square, gates hung and latched, old material hauled off, and the permit pulled and inspection signed where the job requires it. Parts and labor are line-itemed so you see exactly what the panels and hardware cost versus the install. The full job is backed by our 90-Day Done Right Promise, written on the contract, not buried in fine print. Every price change comes as a written change order before any work moves.

Two construction workers installing a wooden cabinet in a kitchen in Fremont, CA

DIY or Call Us?

A homeowner can safely check a few things: whether posts are plumb with a level, whether the gate hinges are tight, and whether caps are seated. What goes wrong on a DIY install is almost always the footing. Setting a post in Fremont clay without the right hole depth and gravel base means it will lean after the first wet season, and pulling and resetting a post later costs more than doing it right once. On a full replacement, panel alignment across a long run and gate swing are where weekend installs fall apart. If you’re not sure whether the problem is a single panel or the whole footing line, call us at (833) 620-6162 for a free estimate and we’ll tell you straight.

FAQs

A standing-seam metal roof over a covered porch

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new curved paver walkway to the front porchA galley kitchen opened up to the dining room with a new peninsulaA walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seatA new bay window with a cushioned seatA new wood side gate with black hardware

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Barrett in Fremont

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Fremont team

A local vetted partner works across Fremont and the towns around it, to the same written standard as every Barrett job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 620-6162
Local Service Coverage

Request a Free Estimate in Fremont

Tell us what you need - Barrett & Sons Construction Fremont responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch