







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Driveway & Pavers: The Fremont Owner’s Guide
We install Boral-compatible driveways and pavers in Fremont, and a full paver driveway here typically runs $7,000 – $18,000 installed, while a paver patio runs $3,500 – $11,000. Matching Boral pavers and the setting components that go with them can usually be sourced quickly, so repair work is scheduled, not improvised. Most Fremont owners find out their pavers are failing the same way: a low spot in the driveway holds water after every winter rain, one or two pavers rock when the car rolls over them, and the joint sand washes away faster each season.

Barrett & Sons Construction Fremont is an independent contractor. We’re not affiliated with Boral; we install and repair their products because the paver lines hold up well in Bay Area weather and the color options match what Fremont neighborhoods were built with.
Key Takeaways
- Boral paver driveways in Fremont run $7,000 – $18,000 installed; patio work runs $3,500 – $11,000.
- Most paver failures here start underneath the pavers, in the base and drainage, not in the pavers themselves.
- Matching a discontinued Boral color is the hardest part of a repair. Get the model name before you call anyone.
- Every price change gets a written change order before work proceeds, backed by our 90-Day Done Right Promise.
Which Boral Models This Applies To

Boral’s hardscape line sold in California covers structured pavers (their Dimension and Bristol lines), Holland-style tumbled pavers, and large-format slabs used for patios and walkways. If your home was built or landscaped between the 1990s and the 2010s, there’s a real chance one of those lines is under your driveway right now. Fremont homes from the Ardenwood and Centerville infill developments in particular used structured pavers that were popular with builders in that window.
To identify what you have, pull up one paver from a corner or an edge where it’s already loose and look at the side profile. Boral pavers are typically 2⅜ inches thick, with a stamped or molded marking on the bottom face that names the line. Measure the length and width in inches, note the color name if it’s on the mark, and take a photo next to a tape measure. That photo is worth more than twenty minutes of phone conversation.
For Boral specifically, the OEM-versus-aftermarket question is settled by the color. If Boral still makes your line, get their paver – the color and texture will blend. If they’ve discontinued it, a quality aftermarket paver in a similar tone will work structurally, but expect a visible patch. We tell customers upfront: nobody’s going to hide a patch that’s sitting in the California sun. Plan for the patch or plan to replace the whole field.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Driveway & Pavers Is Failing
Here’s what owners actually report to us in Fremont, and what’s usually causing it:
- Pavers rocking or sinking underfoot. This almost always means the bedding sand has migrated or the base aggregate wasn’t compacted properly when it was installed. In Fremont’s clay-heavy soils, a base that wasn’t built to depth will settle unevenly within 10 – 15 years.
- Water pooling after rain or irrigation. Standing water on a paver driveway almost never means the pavers failed. It means the slope or the drainage outlet has changed – often because the yard was regraded or a downspout was turned.
- Joint sand washing out repeatedly. If you’re resanding every spring, the drainage is wrong and the water is running across the surface instead of through the joints. Polymeric sand helps, but only if the base drains.
- Efflorescence – the white haze. That’s mineral salt migrating to the surface, common in Bay Area paver installations the first two years and after any wet winter. It usually clears on its own. If it comes back year after year, water is trapped underneath.
- Chipped, cracked, or spalled paver edges. In Fremont, a well-made Boral paver rarely cracks from weather. Cracks usually mean it was driven over by something heavier than a car, or the base gave way beneath it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what paver work actually costs in Fremont, installed, with materials and labor bundled into the range:
| Work | Installed Range |
|---|---|
| Paver driveway installation (full) | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway replacement (full) | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
What drives the range: square footage, whether the base needs to be rebuilt, the paver line you choose, and access – a driveway on a narrow street in Niles takes more handling time than one in Mission San Jose. If you’re repairing rather than replacing, we quote materials and labor separately and put both on the written estimate. No allowance, no surprise. Every price change arrives as a written change order before work moves forward. Every completed job is backed by our 90-Day Done Right Promise.
DIY or Call Us?
You can safely check the base yourself. Lift a paver, look at the bedding sand underneath, and see whether it’s compact and evenly bedded or loose and washed out. Pour a bucket of water on the surface and watch where it goes. That tells you a lot, and it costs you nothing.
What we’d steer you away from is resetting pavers on a rebuilt base without knowing what the base soil is doing. In Fremont, most of our area has clay that holds water, and a paver driveway on a shallow base in that soil will be back to the same problem within two or three winters. The other piece – compacting the base properly – takes plate compactors and patience most homeowners don’t have sitting in the garage. This isn’t dangerous work, it’s just work that fails quietly if you rush it.
Call (833) 620-6162 to schedule your free estimate. Estimates are free, we pull permits where a job needs them, and we don’t send change orders after the fact.
FAQs

A properly installed Boral paver driveway should last 25 to 40 years in Fremont’s climate. The pavers themselves are the durable part. The base and drainage decide whether they last that long or start failing at year 12.
Yes, if the failing area is isolated and the base underneath is sound. We pull the failing pavers, rebuild the base under that section, and reinstall. Where the whole field is settling, a patch will only look odd. Call (833) 620-6162 and we’ll look at the photos before we quote anything.
A small section repair is typically a one-day job. A driveway replacement runs two to four days depending on square footage and access. We’ll tell you the schedule in writing before we start, and we’ll tell you if weather or permits push it back.
We match against the line and color you have on site, then source through Boral when the line is current and through reputable aftermarket suppliers when it’s discontinued. You get the brand and the color named in writing on the estimate, not a vague “matching paver.” You also get a photo of the exact paver before you sign – so what shows up on your driveway is what you approved.
If you’re also using KraftMaid, Cambria, or Silestone anywhere in the project, mention it when you call and we’ll coordinate the schedule.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












