A Barrett company - serving Fremont, CA
A living room with a wall of new windows and a sliding glass door
CGI · Fremont

CGI Windows & Doors in Fremont, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Fremont
A new bay window with a cushioned seat
A new casement window over a kitchen sink
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
A new front yard fence with a matching gate
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Windows & Doors: The Fremont Owner’s Guide

We install CGI-compatible windows and doors across Fremont, with window replacement typically running $4,500 to $15,000 installed and impact-rated units at $8,000 to $25,000 depending on count and glass package. Door hardware and glazing repairs usually land well below those numbers. A live person answers our phone around the clock, so you can get a real range before you commit to anything.

professional driveway & pavers service in Fremont, CA

Call (833) 620-6162

Most Fremont owners don’t go looking for a window or door part until something announces itself. A slider that suddenly needs two hands and a hip check. Fog between the panes that wasn’t there last summer. A hinge that lets the sash sag until the lock won’t catch. The part was probably wearing out for a year before you noticed. That’s normal. This page is for the point where you’ve noticed and you want to know what fits, what it costs, and whether you’re the one who should touch it.

Which CGI Models This Applies To

New double-hung windows in a dining room

CGI makes aluminum and vinyl window and door lines that have been common on Fremont homes since the 1980s and 1990s, especially in the tract neighborhoods built around Central Fremont and the Irvington district. The parts that fail are usually the same handful: sash balances on single-hung units, rollers on sliding glass doors, tilt-latch assemblies, weatherstripping, and the glazing seal itself. Which one you need depends on the series, and the series is stamped on a manufacturer’s label typically found in the head jamb or on the sash edge when you open the window.

Here’s where Fremont owners get stuck. CGI changed balance and roller designs across production years, and a part that looks identical in photos can be a quarter inch off in the channel width. Measure the balance channel, the roller housing, and the glass thickness before you order anything. On the OEM question: original CGI parts are still findable through distributors for many older series, but for discontinued lines a quality aftermarket balance or roller is often the only realistic option and performs well when it’s matched correctly. We’re an independent service provider and not affiliated with CGI. We match parts to your label, not to a guess.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Windows & Doors Is Failing

  • The sash won’t stay up. That’s a failed balance spring or a balance that’s lost tension. Left alone, the sash drops and can crack the glass when it slams.
  • Fogging or a milky haze between the panes. The sealed glass unit has lost its seal and the desiccant is spent. No cleaning fixes this; the insulated glass unit needs replacing.
  • The slider drags or jumps the track. Worn rollers or a bent track. Fremont’s summer heat swells aluminum frames slightly, which makes an already-worn roller bind harder in July and August than it did in spring.
  • Drafts and water staining at the corners. Compressed or hardened weatherstripping, common in homes over 15 years old. You’ll usually see the water line on the sill before you feel the draft.
  • The lock won’t line up or the handle feels loose. A sagging hinge or a striker that’s drifted. Sometimes it’s a five-dollar adjustment; sometimes the hinge is shot and the sash is out of square.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Window replacement in Fremont runs $4,500 to $15,000 for a typical whole-house scope, and impact window installation runs $8,000 to $25,000 where the glass package and count drive it up. A single insulated glass unit swap or a roller and balance set costs far less and we’ll quote it line by line so you see parts and labor separately. What moves the range: how many openings, glass options, whether the frames are sound or the whole unit comes out, and second-story access.

Every quote is written before work starts, and any change in scope arrives as a written change order before it touches the job. Permits get pulled on eligible work and the inspection gets signed. Every completed job carries our 90-Day Done Right Promise in writing. We also offer a free second opinion on any written estimate if you’ve already been quoted.

professional driveway & pavers service in Fremont, CA

DIY or Call Us?

You can safely do a few things yourself. Open the window and read the manufacturer label. Measure the balance channel and the glass thickness with a tape. Clean the roller track and see if the drag improves. You can also check whether the lock misalignment is just a loose striker screw.

Where it goes wrong: replacing a sealed glass unit requires setting the unit square and sealing it correctly, and a bad install fogs again within a season. Swapping a balance on a heavy sash is a two-person job with real risk of the sash dropping. If your window is above the first floor, working from a ladder on a Fremont hillside grade is how people get hurt. That’s the line where we’d rather you called. Call (833) 620-6162 and we’ll tell you honestly whether it’s a quick part or a bigger job.

FAQs

Installers setting a new window and checking it for level

How long do CGI windows and doors last in Fremont? Expect 20 to 30 years from the frame and hardware, with the sealed glass unit typically the first thing to go, often between 10 and 20 years. Fremont’s hot, dry summers and the marine layer rolling in from the Bay work the seals harder than a stable climate would.

Can the part be repaired instead of replaced? Often, yes. Balances, rollers, latches, and weatherstripping are replaceable on their own, and a fogged insulated glass unit can be swapped without pulling the whole window. We’ll tell you when a repair is the honest call and when it’s throwing money at a frame that’s already failing.

How long does the swap take? A single part like a roller set or balance is usually a short visit. A glass unit or a full window replacement depends on count and access, and we’ll give you a realistic timeline in the written quote rather than a phone promise.

How do you source the CGI part? We match it to the label on your unit and the measurements we take on site, then source OEM where it’s available and a quality aftermarket equivalent where the line is discontinued. Call (833) 620-6162 for an exact quote, and estimates are free.

Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seatA standing-seam metal roof over a covered porchA new concrete driveway with a paver borderA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled hall bathroom with subway tile and a floating vanity

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Barrett in Fremont

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Fremont team

A local vetted partner works across Fremont and the towns around it, to the same written standard as every Barrett job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 620-6162
Local Service Coverage

Request a Free Estimate in Fremont

Tell us what you need - Barrett & Sons Construction Fremont responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch