A Barrett company - serving Fremont, CA
A living room with a wall of new windows and a sliding glass door
E
ES Windows · Fremont

ES Windows Windows & Doors in Fremont, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Fremont
New double-hung windows in a dining room
A new front entry door with glass sidelights
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A standing-seam metal roof over a covered porch
A new wood side gate with black hardware
A new concrete driveway with a paver border
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ES Windows Windows & Doors: The Fremont Owner’s Guide

Replacing or repairing ES Windows windows and doors in Fremont usually runs $4,500 – $15,000 for a standard window replacement, and impact-rated installations that meet Fremont’s wildfire-zone requirements land at $8,000 – $25,000. Most Fremont owners figure out something failed the same way: a window that won’t close flush against the jamb, a door that drags on one corner, or condensation stuck between panes that never clears. We work with ES Windows products as an independent service provider, not affiliated with ES Windows, and we handle the parts sourcing, the permits, and the install.

professional home additions & adu service in Fremont, CA

Call (833) 620-6162

Which ES Windows Models This Applies To

A new bay window with a cushioned seat

ES Windows covers a wide spread of product lines, and the part you need depends on which one you’re holding. Vinyl single-hung and slider windows from the 2000s run on different balance assemblies than the newer tilt-wash models, and door hardware from the entry and patio lines doesn’t swap between series. The fastest way to identify your unit is a serial or model sticker on the inside of the upper jamb, usually hidden behind the sash when the window is closed. If the sticker is gone, we measure the visible glass and the frame depth, and that combination usually narrows it to two or three candidates.

The OEM-versus-aftermarket decision matters more on ES Windows than most brands. Original ES Windows hardware matches the frame cut exactly, which matters for corners and tilt latches that carry weight. But some of the commodity hardware – rollers, screen clips, basic weatherstripping – has solid aftermarket equivalents at half the price and no difference in lifespan. We’ll tell you which category your part falls into before you spend anything. If you need cabinetry or counter work alongside your window project, we carry KraftMaid, Cambria, and Silestone as well.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ES Windows Windows & Doors Is Failing

  • The sash won’t stay up. That’s a balance or spiral-tension failure, and it’s the number-one call we get in Fremont. The spring wears out after 12 – 18 years of daily use, and once it goes the sash drops the second you let go.
  • Water pools on the interior sill after rain. Usually a failed weather seal, a clogged weep channel, or a corner weld that cracked from the thermal cycling Fremont gets between hot afternoons and fog-cooled evenings.
  • The door drags or catches. A door that sticks at the bottom or rubs the strike plate often means a worn hinge or a roller assembly that’s flattened under the door’s weight. Sometimes it’s a settling threshold, which is a different fix entirely.
  • Fogging between the glass panes. A failed seal in the insulated glass unit, not a cleaning problem. Once moisture gets inside the cavity, the desiccant is saturated and no amount of wiping fixes it.
  • The lock won’t catch without lifting the door. Multipoint hardware drifting out of alignment. Left alone, this one wears the strike plates thin and eventually the door won’t latch at all.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installers setting a new window and checking it for level

Standard ES Windows window replacement in Fremont runs $4,500 – $15,000, depending on how many units, the size, and whether we’re matching an existing series or upgrading. Impact window installation that meets Fremont’s wildland-urban interface codes falls between $8,000 and $25,000. Single parts like a balance, roller, or latch typically run a few hundred dollars installed – call us for an exact figure on your specific part.

Every estimate is itemized: part cost, labor, and any trim or flashing work listed separately, so you see exactly what you’re paying for. No whole-house number with a parts cost buried inside it. Every price change arrives as a written change order before work moves forward, and permits get pulled on any job that needs them. The work is backed by our 90-Day Done Right Promise – if a part we installed fails or doesn’t seat right, one call brings us back.

DIY or Call Us?

You can safely check a few things yourself: hold the sash and see if the balance catches, look for a cracked weld at the frame corner, check whether the weep holes at the bottom of the sill are clear. That’s diagnosis, not repair, and it’ll save you time on the phone. Where DIY goes wrong on ES Windows parts is in the balance assemblies and insulated glass units – a balance under tension can snap back hard if you don’t know how to release it, and glass units need the frame squared correctly or you’ll fight leaks for years.

Windows are also heavy, and a dropped sash on a Fremont hillside property is a bad afternoon. If you’re not sure, call us at (833) 620-6162. Live person answers, 24 hours a day, and we’ll tell you honestly whether it’s a parts call or a full replacement.

FAQs

A new white vinyl privacy fence with a double gate

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new stained cedar privacy fenceA new paver patio with a seat wall and fire pitA remodeled primary bathroom with a soaking tub and walk-in showerA single-story rear room addition with tall windows and a new patioA new clay tile roofA new front yard fence with a matching gate

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Barrett in Fremont

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Fremont team

A local vetted partner works across Fremont and the towns around it, to the same written standard as every Barrett job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 620-6162
Local Service Coverage

Request a Free Estimate in Fremont

Tell us what you need - Barrett & Sons Construction Fremont responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch