







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Home Additions & ADU: The Fremont Owner’s Guide
If you’re planning a home addition or ADU in Fremont and your plans specify ES Windows glazing packages, we install them and build around them: additions in Fremont typically run $45,000 – $130,000, and detached or attached ADUs run $90,000 – $220,000. This isn’t same-day work. A permitted addition is a months-long job with plan review at Fremont City Hall and inspections before anything gets signed off. What you’ll want first is a written scope and a free estimate.

Owners usually land here after a failed window-and-door package inside an existing addition or converted ADU. The symptom picture is familiar: a slider that drags against the frame in summer, a bedroom window in an addition that fogs between the panes by January, or a stucco-to-window joint in a converted garage that’s been letting Fremont rain in behind the trim for two winters. By the time it’s visible inside, the framing has usually been wet a while.
Which ES Windows Models This Applies To

ES Windows is a California manufacturer, and its product lines are sold through dealers and builders rather than off a shelf, so matching a part means matching the series, not the logo. The two families you’ll run into on Fremont additions and ADUs are vinyl single-hung and sliding units, and aluminum-framed sliding doors and windows used in ADU and garage-conversion work. Each carries a different balance system, different screen track, and different weatherstripping profile.
The identifying details live on the unit itself. Pull the interior jamb or the frame reveal and look for the manufacturer label: it carries a series code and often a date of manufacture. Then measure the rough opening and, separately, the visible glass dimension – ES Windows has changed sash profiles across production runs, and two windows that look identical from across a room can take different balances. A photo of the label plus two measurements gets us to the right part on the first pass more often than a guess does.
Where an ES Windows unit is discontinued or the label is long gone, a quality aftermarket balance, roller, or weatherstrip that matches the extrusion and weight rating is a fair substitute. It’s usually the better call on a part inside a wall cavity you won’t want to reopen. We carry no parts on a truck and we don’t stock inventory; we order to the job, which is why the model information matters.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Home Additions & ADU Is Failing
These are the symptoms that actually bring people to the phone, and what’s usually underneath each one.
- Fogging or condensation between the panes. The insulated glass seal has broken, and the desiccant inside is spent. In the addition’s more humid rooms – a converted-garage ADU bathroom, a laundry alcove – this tends to happen faster because interior moisture loads are higher.
- A sash that won’t stay up, or slams down. The balance spring or block has lost tension or the shoe has worn. This is a moving part with a finite cycle count, and on a slider used daily as an ADU entry it can wear out years before the glass does.
- The slider drags or jumps its track. Rollers flatten and the track fills with grit; in Fremont’s dry summer months the debris turns to a fine abrasive and accelerates the wear. It reads as a heavy door when it’s really a tired roller.
- Water stains or soft wood at the frame corners. The weatherstrip, sill pan, or sealant joint has failed and water is getting behind the trim. Catch this early and it’s a window job. Miss it and it becomes a framing job, which is where addition budgets go sideways.
- A draft you can feel at the meet rail or jambs. The weatherstripping has compressed permanently. It’s a cheap part with an outsized effect on the comfort of an addition that already has more exterior wall per square foot than the original house.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s how the numbers shake out for this work in Fremont. Every figure below is installed – parts and labor, not a parts-only price that leaves you hunting for an installer.
| Project / Repair | Installed Range (Fremont) |
|---|---|
| Home addition (per job) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion to ADU | $30,000 – $80,000 |
| Window replacement (ES Windows-compatible) | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
What drives the range on a window-and-door package inside an addition: the number of openings, whether the framing needs repair once the old unit comes out, glass specification, and how much exterior finish – stucco, trim, siding – has to be cut and restored. On a full addition or ADU, the swing comes from square footage, foundation and grading, and how much MEP work runs to the new structure.
Every eligible job gets permits pulled and inspections signed, and every price change comes to you as a written change order before the work happens. That last part matters on additions more than most jobs, because the surprises live behind the drywall.
DIY or Call Us?
Some of this you can check yourself safely. Run a hand along the frame corners inside and out for soft spots. Look at the label on the jamb and write down the series code. Open and close the slider slowly and note where it binds. Turn the lights off at dusk and look for daylight around the sash. Those four checks give you a real diagnosis.
Where it goes wrong: pulling an insulated glass unit or a sash out of a finished wall opening without supporting it, and any work at height on a second-story addition window. A dropped sash or a fall from a ladder costs far more than the repair. We’re an independent contractor and not affiliated with ES Windows – we match and install the parts, we don’t manufacture them. If you’re unsure which side of the line your job falls on, call (833) 620-6162 and describe what you’re seeing.
FAQs

Plan on roughly 20 to 25 years for the window itself, with the insulated glass seal often the first thing to go at 12 to 18 years and balance hardware failing earlier on daily-use units. Inland Fremont heat cycling is harder on seals than coastal air, so a south- or west-facing addition window ages faster than the same unit on a shaded wall.
Often yes. A balance, roller, or weatherstrip swap is a repair, and it’s worth doing when the glass and frame are sound. Fogged insulated glass means the seal is gone and the glass unit itself has to be replaced, not patched. Call (833) 620-6162 with a photo and we’ll tell you honestly which one you’re looking at.
A single balance or roller is an hour or two on site. Replacing a full insulated glass unit in a slider or single-hung is typically one visit plus the lead time to order the matched unit. On a planned addition or ADU we lay out the whole schedule in writing before work starts.
We order to your unit’s series code and measurements rather than guess from a photo, which is why the label matters so much. Where an ES Windows part is discontinued, we source a matching aftermarket equivalent and tell you that’s what you’re getting before you approve it. We also handle KraftMaid, Cambria, and Silestone finish work on the interior side of additions when the job calls for it.
Barrett & Sons Construction Fremont is owner-operated and local. Every price change is in writing before work moves, permits get pulled on every eligible job, and our technicians bring up to 28 years of experience to the work. Call (833) 620-6162 for a free estimate – a live person answers, day or night. Ask about our $40 Off Any Repair Over $200, the Free Second Opinion on Any Written Estimate, no trip charge inside the county, and the permanent 10% senior and veteran discount.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












