A Barrett company - serving Fremont, CA
A backyard with a new horizontal privacy fence
Jerith · Fremont

Jerith Fence Installation in Fremont, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Fremont
A new black aluminum pool fence with a gate
A new wood side gate with black hardware
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
A new multi-panel patio door opening a kitchen to the patio
A new paver patio with a seat wall and fire pit
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Jerith Fence Installation: The Fremont Owner’s Guide

Aluminum ornamental fence installation in Fremont runs $4,000 – $10,000 for most residential runs, and that’s the honest number for a Jerith-grade system done with real footings and inspected permits. Jerith itself doesn’t install. They manufacture the panels, posts, pickets and gates; a licensed contractor sets them. We install Jerith and Jerith-compatible aluminum fencing across Fremont, and we’re an independent contractor, not affiliated with Jerith.

professional windows & doors service in Fremont, CA

Call (833) 620-6162

Owners usually call us after a windstorm or after they finally notice what the last dry season did. A post that was plumb in March has a lean by October. A gate that latched with two fingers now drags on the concrete. Or a panel is missing its bottom rail cap and the pickets have started walking in the channel. In Fremont, that pattern is so common it’s almost a calendar: our wet winters push clay soil around, then five dry months shrink it back, and a footing set too shallow shows up as a lean within a season or two.

Key Takeaways

  • Jerith is a manufacturer, not an installer. You need a licensed contractor who knows the product line.
  • Most “fence part” calls in Fremont turn out to be a footing or gate-sag problem, not a broken panel.
  • Installed aluminum fence pricing here lands at $4,000 – $10,000 for a typical residential run.
  • Permits matter. Fremont fences over a certain height and any fence in a front setback need review, and we pull them.

Which Jerith Models This Applies To

A new stained cedar privacy fence

Jerith builds aluminum ornamental fence in several product lines, and the parts don’t swap between them. The two families most Fremont homeowners have are the traditional picket lines (think the classic spear-top and flat-top residential styles) and the heavier commercial-grade rail systems used around pools and along property lines shared with a busy street. Pickets, rails, brackets, post caps, and hinges are series-specific. A 3/4-inch picket bracket will not sit on a 5/8-inch rail, and a gate hinge drilled for the residential line won’t line up on the commercial hardware pattern.

Identifying what you have takes about five minutes. Measure the picket width with a tape, count pickets between posts, measure the rail height top and bottom, and look at the hinge style on any gate. Jerith stamps and labels appear on the brackets and inside post caps on many runs, and the manufacturer can confirm a series from photos. If you can’t find a label, the measurements alone usually settle it.

The OEM-versus-aftermarket call is real here. Jerith replacement parts are the safe match, especially for anything with a powder-coat finish, because an off-brand bracket will hit the color differently under Fremont’s hard summer sun within two seasons. Quality aftermarket aluminum brackets and hinges are fine for hidden hardware, and we’ll tell you plainly when aftermarket is a good buy and when it isn’t. We don’t stock parts and we don’t carry them on a truck. We order what your fence actually needs and bring it to the job.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Jerith Fence Installation Is Failing

These are the symptoms we see most, and what’s actually going on underneath each one.

  • A post that leans after winter. Water got under the footing and the soil around it shifted. A leaning post is almost never the post’s fault; it’s the footing depth or drainage. Re-plumbing the post without fixing the cause means it leans again next spring.
  • The gate drags or won’t latch. Gate sag on an aluminum run is usually hinge wear combined with a post that has moved a fraction of an inch. Replacing the hinge alone fixes it for a month. Setting the post and re-hanging the gate fixes it for years.
  • Pickets walking out of the rail channel. The retaining screw or the rail cap has loosened, or the rail itself has flexed from a hit. Small fix, but catch it before a windstorm sends a picket into the neighbor’s yard.
  • Powder coat chalking or flaking near the bottom rail. Sprinkler overspray and lawn chemical splash attack the finish first at the lowest point. Once the coating fails, bare aluminum starts to pit. It’s cosmetic until it isn’t.
  • A panel that’s out of line with its neighbors. The run was set on grade that has since settled. On Fremont’s clay-heavy lots, an out-of-line panel is a grade problem, and patching the panel hides a footing that needs attention.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Aluminum fence installation in Fremont lands at $4,000 – $10,000 for most residential runs. The range is driven by linear footage, gate count, terrain, and how much of the existing fence can be reused. A run that’s mostly sound and needs new hardware, a re-set post, and a fresh gate re-hang sits at the bottom of that range. A full replacement with new footings, new panels, and a pair of gates sits at the top.

professional windows & doors service in Fremont, CA
  • Posts, panels, pickets, rails, brackets, caps and gate hardware: priced as a line item
  • Footings dug to depth and set in concrete, not tamped into dirt
  • Old fence removal and haul-off
  • Permit pulled and inspection signed where the job requires it
  • Labor and cleanup

Every scope and allowance is in writing before we start, and any change arrives as a written change order before work moves. Parts-plus-labor is broken out, not bundled into one number you can’t check. The work is backed by our 90-Day Done Right Promise: if something’s not right, Tom comes back and makes it right on one call. We also carry KraftMaid, Cambria, and Silestone on the kitchen and countertop side, because the same standard applies across every trade we touch.

DIY or Call Us?

You can safely check a lot of this yourself. Measure your picket and rail widths, look for loose brackets, tighten a hinge screw, and see whether a gate is dragging because of the hinge or the post. That’s a Saturday afternoon and a screwdriver.

Where it goes wrong is the post and the footing. Digging out a set post, re-setting it plumb at the right depth, and getting the run back on line without pulling the panels out of alignment is a job that punishes a first attempt. A post set into damp Fremont clay without proper depth and drainage will lean again inside a year. And a gate re-hang on a post that’s still moving is wasted work. If your fence is leaning, the gate is sagging, or a panel is out of line, call us at (833) 620-6162 and we’ll look at it and give you a straight answer. Estimates are free, and so is a second opinion on any written estimate you already have.

FAQs

A new front entry door with glass sidelights

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
New painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted wallsA remodeled kitchen with a waterfall island and wood cabinetsA wood double vanity with two mirrors after a bathroom remodelA newly finished roof with a ridge vent and step flashingA galley kitchen opened up to the dining room with a new peninsula

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Barrett in Fremont

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Fremont team

A local vetted partner works across Fremont and the towns around it, to the same written standard as every Barrett job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 620-6162
Local Service Coverage

Request a Free Estimate in Fremont

Tell us what you need - Barrett & Sons Construction Fremont responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch