







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Driveway & Pavers: The Fremont Owner’s Guide
We install ActiveYards-compatible driveway and paver systems across Fremont, with installed paver driveways typically running $7,000 to $18,000 and paver patios $3,500 to $11,000. If a paver has cracked, a border has heaved, or a section near the garage apron has settled, the fix usually means matching the exact ActiveYards profile and color lot so the repair disappears into the field. Homeowners in Fremont often spot the problem after the first heavy winter rain, when water pools against the house or a paver at the driveway edge rocks underfoot.

We’re an independent service provider, not affiliated with ActiveYards. When you call, you get a contractor who can look up the profile, match it to your existing field, and tell you honestly whether a repair will blend or whether the section needs to be rebuilt.
Key Takeaways
- ActiveYards pavers fail at edges, joints, and base first, rarely at the paver face itself.
- Color and profile matching matters more than brand name on a repair.
- Most driveway paver repairs in Fremont fall between $250 and a full $7,000 to $18,000 rebuild.
- We install to written spec, pull permits where required, and back the work with the 90-Day Done Right Promise.
Which ActiveYards Models This Applies To

ActiveYards runs its hardscape line through several paver families and a handful of wall-and-cap systems, and the profile you have depends on which one your driveway or patio was built from. The quickest way to identify yours is to pull a loose or damaged paver and read the stamp, mold mark, or packaging code on the underside. Most ActiveYards pavers carry a manufacturer mark, and the color name is usually on the original project paperwork or a leftover pallet wrapper if the installer left one behind.
For matching, measure three things on the failed piece: the face dimensions (a standard paver is often 4×8 inches, 6×9, or a large-format 12×12), the thickness (2 3/8 inches is common on driveway-rated pavers, thinner on patio only), and the edge style (straight, beveled, or tumbled). The profile and thickness both matter, because a driveway-rated ActiveYards paver is engineered for vehicle load and a thinner patio-grade substitute won’t hold up where a car parks.
On the OEM-versus-aftermarket question: for a repair inside the field, a genuine ActiveYards paver in the same color lot is the only way to get a true blend, because dye lots shift from year to year and an aftermarket lookalike in “similar” color will read as a patch under Fremont sun. For base, bedding sand, and polymeric joint sand, quality aftermarket materials are fine and often better, since the paver is the visible part and the base is what actually carries the load.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Driveway & Pavers Is Failing
- Hairline cracks spreading across a paver face. Usually a base problem, not a bad paver. Water got under the edge, the base washed out, and the paver flexed until it cracked.
- Rocking or loose pavers near the garage apron or street cut. Traffic load and runoff erode the bedding sand at the edges first, leaving a paver with nothing solid underneath.
- Weeds pushing through joints and polymeric sand washing out. The joint sand has failed or was never fully compacted, so water channels between pavers instead of sheeting off the surface.
- Heaved or sunken borders and soldier courses. Fremont’s clay-heavy soils expand and contract with seasonal moisture, and a border without proper edge restraint moves first.
- Pooling water against the house or in low spots. The slope has drifted from the original grade, which is the earliest warning and the one that leads to foundation trouble if ignored.
If a paver near a step or retaining edge has moved, or water is running toward the house, treat it as urgent and get eyes on it before the next storm. Call (833) 620-6162 and we’ll take a look.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Typical installed pricing for Fremont paver work:
| Scope | Installed Range |
|---|---|
| Spot paver repair (single section) | $250 – $900 |
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Sealing | $250 – $700 |
What drives the range: total square footage, whether the base and edge restraint are being rebuilt or reused, matching hard-to-find color lots, and access for equipment on tight Fremont lots. Our quotes are line-item and in writing, so you see the material cost, labor, base prep, and disposal separately. Every eligible job includes permits pulled and inspections signed, and every completed job is backed by the written 90-Day Done Right Promise: if something’s off, one call brings Tom back. Prices never shift mid-job without a written change order signed before the work moves.
DIY or Call Us?
There’s a safe middle ground here, and it’s worth knowing where it ends. You can absolutely inspect your own driveway: lift a loose paver, check the base sand underneath, look for standing water after a rain, and photograph cracks before calling. Replacing joint sand and re-sweeping polymeric sand into a few dry joints is a weekend job an owner can handle.
Where DIY goes wrong: re-bedding a paver without fixing the base underneath just means the same crack comes back next season, and rebuilding edge restraint or re-grading to shed water toward the street is where most homeowner attempts leave a driveway that fails again inside two years. Cutting and fitting a replacement paver to thickness and slope takes the right tools, and getting the grade wrong against the house is a real cost. If the failure is at the edge, near a step, or water is running toward the foundation, that’s our job. Call (833) 620-6162 for a free estimate.
FAQs

How long do ActiveYards pavers last in Fremont? A properly installed ActiveYards paver driveway should hold for 25 to 30 years or more in Fremont’s climate, as long as the base and edge restraint are done right. The pavers themselves rarely fail; the base is what determines lifespan.
Can a cracked or heaving paver be repaired instead of replaced? Yes, most single-paver or border repairs can be done without tearing out the whole field. We’ll pull the damaged section, fix the base, and set a matching paver in the same color lot, then re-sand and re-compact the joint.
How long does a paver repair take? A small repair inside the field is usually a half-day to a full day. A section rebuild with new base can take two to three days depending on how much is undercut. We give you the timeline in writing before we start.
How do you source the correct ActiveYards part? We pull the model and color code from the existing paver, cross-check with the manufacturer’s current catalog, and order from a supplier that can confirm the lot. If the exact color is discontinued, we’ll show you the closest match and quote a discreet repair location so the difference doesn’t show. Call (833) 620-6162 to schedule a free estimate.
Questions about a KraftMaid, Cambria, or Silestone job too? We handle those trades as well.
Barrett & Sons Construction has been owner-operated since 1998, and our crew members bring up to 28 years of experience. We show up, pull the permits, put every price in writing, and stand behind what we build. Call (833) 620-6162 for your free estimate in Fremont today.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












