







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Fence Installation: The Fremont Owner’s Guide
We install ActiveYards fencing across Fremont, and most residential projects land between $3,500 and $9,000 installed, depending on linear footage, material line, and gate count. That price covers the full install: posts set in concrete, panels hung, gates fitted, haul-away. If you’re pricing a replacement section rather than a whole run, call (833) 620-6162 and we’ll give you a written line-item quote. We’re an independent contractor and not affiliated with ActiveYards, which means we quote you the fence, not a brand program.

How owners usually find us: they’ve got a vinyl privacy run that’s been in the ground 10, 15, sometimes 18 years, and the rails have started to sag or a post has gone soft at the base. Sometimes it’s one panel leaning after a windy March. Sometimes the gate has dropped enough that it drags the ground every time you close it. The fence didn’t fail all at once. Fremont’s clay-heavy soils and wet winters get under the posts, and once that happens the panel geometry goes with it. Most people call us after the second or third panel, when it’s clear the fix isn’t a one-panel job anymore.
Key Takeaways
- Typical installed range in Fremont: $3,500 – $9,000 for ActiveYards vinyl or aluminum fencing.
- Most failures trace to post footings, not the fence material itself.
- We pull permits where required and write every scope change as a change order before work starts.
- Every eligible job is covered by our written 90-Day Done Right Promise.
Which ActiveYards Models This Applies To

ActiveYards is a brand family, not a single product line, and the part and panel specs vary across their vinyl and aluminum series. Their vinyl privacy lines – the ones most Fremont homeowners have – run several distinct profiles: a standard privacy panel, a heavier “grand” style with wider pickets and thicker rails, and decorative-top variants that take a different top rail and cap. Aluminum lines are a separate animal entirely, with different post wall thicknesses, different bracket systems, and either rackable or non-rackable panels depending on model.
Before we quote, we need to know which line you have. The easiest way to identify it is to measure the panel width (standard runs are typically 6 ft or 8 ft between post centers, but not always) and measure the post face dimension. If there’s an original install sticker on a post or a stamp on the inside of a rail, that’s the cleanest identifier. Photos of the post base, the rail connection, and the gate hardware help us match the profile.
On the OEM-vs-aftermarket question: ActiveYards replacement parts are worth using when the profile is a current series and the match matters visually, since a mismatched rail or picket shows. For older or discontinued profiles, a quality aftermarket equivalent from a supplier who stocks the same extrusion is often the only realistic path, and it’s fine as long as the wall thickness and bracket pattern match. We’ll tell you which one we’re recommending and why, in writing, before anything is ordered.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Fence Installation Is Failing
- Posts that wobble when you push on them. This is almost always the footing, not the post. In Fremont’s clay soils, a post set too shallow or in a footing that didn’t drain will work loose over a wet winter, and the whole panel follows. If you can rock a post by hand, the fence is already compromised at the base.
- Rails sagging between posts. Usually a failed rail-to-post bracket or a rail that’s cracked at the fastener. On older ActiveYards profiles the bracket is the weak point, and once one lets go the panel takes the load and another follows.
- Panels leaning out of plumb. Frost heave and soil movement. A panel that leans 2 inches at the top is a post problem, and patching the pickets won’t correct it.
- A gate that drags or won’t latch. Gate hardware and hinges wear first on a vinyl fence, and a gate that’s dropped is usually a sign of hinge sag or a post that’s shifted. A dragging gate chews up the bottom rail fast.
- Gray, chalky, or cracked vinyl at the base. UV fade is normal, but cracking at a post base where the material meets soil is not, and it usually means water is sitting there. That’s a drainage and footing issue, not a cosmetic one.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Fremont, an ActiveYards fence install typically runs $3,500 to $9,000 installed. On the low end you’re looking at a shorter run or a simpler panel profile; on the high end, a longer privacy run with gates and heavier posts. What moves the price: linear footage, panel profile, post spacing, number of gates, terrain (a slope changes how posts and panels are set), and whether old fencing has to come out and be hauled away. We quote parts and labor as separate line items so you can see exactly what’s material and what’s install.
Every price is in writing before we start. If the job encounters something we didn’t see – a footer that’s deeper than expected, a buried obstruction, a post that needs extra concrete – that change comes to you as a written change order before we touch it. No surprise invoice at the end. Our crew carries our name, and every eligible job is covered by the 90-Day Done Right Promise. If something we installed isn’t right, one call brings us back. Learn more about our full fence installation in Fremont.
DIY or Call Us?
What’s safe to check yourself: walk the line and push on each post. Wobble tells you which footings have failed. Look at the rail brackets for cracks, check the gate for sag, and photograph any stamp or sticker on the posts. That’s the diagnostic, and it costs you nothing. Where DIY goes wrong on this job is the footing work and the panel geometry. Getting a post set correctly in clay, at the right depth, with proper drainage, and keeping panels plumb and square through the run, is a different skill set than swapping a rail. A new post set badly just loosens up again next winter, and now you’ve paid for concrete and lost the original alignment. We are also a high-tension-fencing service, and any work involving tensioned hardware or a fence line supporting a gate should be done by someone who has set it before. Call (833) 620-6162 and we’ll walk the line with you and tell you straight whether it’s a repair or a replacement. Our technicians have up to 28 years of experience on projects like this.
FAQs

A properly installed ActiveYards vinyl fence generally lasts 20 to 30 years, and the material itself is rarely the failure point in Fremont. What fails first is the post footing, usually within the first 10 to 15 years, because the clay soil and winter moisture put stress on the base. A good install with adequately deep, well-drained footings is what makes the difference. Call (833) 620-6162 for a free estimate on yours.
Often yes, if the failure is limited to a post, a bracket, or a gate hardware set and the panel profiles are still available. A single failed post or a dropped gate is usually a repair; a run of leaning panels or multiple failed footings is usually a replacement. We’ll tell you which you’re looking at after walking the line, in writing. Call us for a free second opinion on any written estimate.
A single-panel or post repair is typically a short day. A full fence run for a typical Fremont residential lot usually takes one to three install days depending on footage, terrain, and gate count. We’ll give you the day count in the written quote, and if the job uncovers something that changes it, you get a written change order before we proceed. Call (833) 620-6162 to schedule your free estimate.
We match the profile first – by measurement and any stamp or sticker on your existing fence – then source the correct panel, post, and bracket through trusted suppliers. We don’t stock parts and don’t carry them on a truck; we order to your job. If a profile is discontinued, we’ll recommend a quality aftermarket equivalent and explain the match in the quote. We pull permits where required and inspections are signed before we’re done. Call us and we’ll start with a free estimate.
We’re a full-service construction shop, and alongside fencing we handle kitchen remodels with KraftMaid cabinetry, countertops in Cambria and Silestone, roofing, windows and doors, driveways and pavers, and home additions. We install premium brands across every trade so you can verify what’s going in your yard, not wonder what showed up. For ActiveYards fencing – new install, repair, or replacement – call (833) 620-6162 for your free estimate. A live person answers, 24 hours a day.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












