A Barrett company - serving Fremont, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Barrette · Fremont

Barrette Kitchen Remodeling in Fremont, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Fremont
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
New double-hung windows in a dining room
A new front yard fence with a matching gate
A new paver pool deck
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Barrette Kitchen Remodeling: The Fremont Owner’s Guide

We install Barrette kitchen components and refit failed Barrette parts across Fremont, and a full Barrette kitchen remodel runs $14,000 – $45,000 installed, with single-part repairs priced line by line. We’re an independent construction company, not affiliated with Barrette; we source genuine Barrette replacement parts and measure-fit equivalents when a model line has been discontinued.

professional construction worker applying caulk to a window frame in Fremont, CA

Call (833) 620-6162

Owners in Fremont usually find a Barrette problem the same way: a cabinet door that won’t stay shut past 80 degrees, a drawer that grinds halfway out, a hinge plate pulling loose from particleboard that took on moisture during the rainy season. Barrette parts are matched to a model number, not a shelf size, so the first move is identifying exactly what you have before anyone quotes you a number. Kitchen Remodel starts at $14,000 and climbs with cabinet runs, island work and countertop changes.

Which Barrette Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Barrette builds kitchen cabinetry and door lines in several series, and the part you need depends on which series your kitchen carries. The fastest way to identify it is the model and series label inside the cabinet box, usually on the back of a drawer box or the inside of a cabinet door. Photograph it. Barrette has retired several series over the years, and a discontinued door profile won’t accept a current hinge; that mismatch is the single most common compatibility gotcha we see in Fremont kitchens.

Two checks matter. First, hinge cup bore: 35mm is standard, but older Barrette doors sometimes ran a shallower bore that a modern clip-on hinge won’t seat in without a plate change. Second, drawer glide length and mounting pattern: 15-inch and 18-inch glides are not interchangeable, and the screw pattern differs between undermount and side-mount versions. On OEM versus aftermarket, genuine Barrette parts match your finish and drilling exactly. A quality aftermarket glide from a known maker will outlast a cheap OEM replacement, but confirm the mounting pattern before you buy. KraftMaid, Cambria and Silestone jobs we handle too, so we’re used to matching parts across brands.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Barrette Kitchen Remodeling Is Failing

  • Doors that drift open on their own. The hinge spring has lost tension or the cup screws have stripped their bite in the door. In Fremont’s dry summers, particleboard shrinks and screws loosen faster than owners expect.
  • Drawers that grind or jump the track. A worn glide roller or a bent track. Once the nylon wheel flattens, no amount of adjusting brings it back.
  • Sagging shelves or a bowed cabinet bottom. The shelf pin has pulled through or the bottom panel took on moisture near the sink. This one gets worse quietly.
  • Loose hinge plates at the cabinet frame. Screws spinning in stripped holes. A bigger screw is a patch, not a fix, and it splits the frame eventually.
  • Finish peeling at the door edges. Heat and steam near the range lift the laminate or veneer edge. It’s cosmetic until moisture gets under it, then the door core swells.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A new wood side gate with black hardware

Here’s what the work runs in Fremont, parts and labor together:

Job Installed Range
Full kitchen remodel $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Kitchen island installation $3,000 – $10,000
Backsplash installation $800 – $2,500

The range is driven by cabinet run length, whether the countertop is being replaced, and how much of the layout is moving. A single hinge or glide swap sits far under these numbers, and we quote it line by line: part, labor, disposal. Our technicians have up to 28 years of experience, and every price change reaches you as a written change order before the work moves. Every eligible job gets permits pulled and inspections signed, and the 90-Day Done Right Promise is written on the contract.

DIY or Call Us?

You can safely do the identification work: read the series label, photograph the hinge cup, measure the glide length, and note whether the door is 35mm bored. Swapping a drawer glide on a standard side-mount is also within reach if you match the pattern exactly. Where it goes wrong is stripped hinge plates in a cabinet frame, doors that need re-boring, and any job where the cabinet box itself has taken on water damage near the sink. We’ve watched homeowners chase a stripped screw with a larger screw three times and split the stile. Call us at (833) 620-6162 and we’ll tell you honestly whether it’s a ten-minute part swap or a cabinet repair, then schedule your free estimate.

FAQs

A new concrete driveway with a paver border

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing rooflineA newly finished roof with a ridge vent and step flashingA new front entry door with glass sidelightsA new black aluminum pool fence with a gateA new curved paver walkway to the front porch

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Barrett in Fremont

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Fremont team

A local vetted partner works across Fremont and the towns around it, to the same written standard as every Barrett job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 620-6162
Local Service Coverage

Request a Free Estimate in Fremont

Tell us what you need - Barrett & Sons Construction Fremont responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch