







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Fence Installation: The Fremont Owner’s Guide
Fence installation using Boral composite materials in Fremont typically costs $3,500 to $9,000 installed, depending on linear footage, height, and gate count. We handle the full job: setting posts to Fremont’s clay-soil specs, hanging panels square, and pulling the permit when your fence crosses a property line or exceeds height limits. Most Fremont owners discover the problem the same way: a post starts leaning after a wet winter, a panel sags at the top rail, or a gate that used to latch clean now drags on the concrete. By the time the second post wobbles, the original fasteners have usually corroded through or the footings were set too shallow for this soil. We’re an independent contractor, not affiliated with Boral, and we work with the material you’ve already got or can source the right Boral line to match.

Which Boral Models This Applies To
Boral’s composite fence line has changed names and profiles over the years, so matching the right panel and post cap matters more than most owners expect. The common residential profiles are the wood-grain composite panels and the capped composite series, and the tell is usually stamped on the post cap, the rail end, or a small label inside the gate frame. Measure your post spacing center-to-center before you order anything: Boral panels are cut for specific bay widths, and a half-inch mismatch at the post is the difference between a tight fit and a panel you have to shim. For older installations in Fremont, the OEM cap and rail profile may be discontinued, which is where a quality aftermarket equivalent makes sense. We don’t stock parts or carry them on a truck; we identify your exact profile, then source the match. If you’re also updating interiors, we install KraftMaid, Cambria, and Silestone, so one call can cover more than the fence line.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Fence Installation Is Failing
- Posts leaning after rain. Fremont’s expansive clay soil swells and shrinks with the seasons, and a footing set too shallow or without proper gravel drainage will rock within a couple of wet winters.
- Sagging top rails. A rail that bows between posts usually means the fasteners have backed out or the rail was never screwed to a blocking plate at the post.
- Gate dragging or not latching. Gates take the most stress of any section, and a hinge post that’s shifted even a quarter inch throws the latch out of line; this is the symptom owners notice first.
- Discoloration or chalking on panels. Boral composite holds color well, but prolonged UV exposure on an uncapped profile can chalk and fade unevenly, which is a material-grade issue rather than a cleaning problem.
- Loose or missing post caps. Caps keep water out of the post core. Once one goes missing, moisture wicks down and the post fails from the inside, which you won’t see until the panel shifts.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Fence installation in Fremont runs $3,500 to $9,000 for a typical residential run. The range is driven by linear footage, fence height (6-foot is standard, 7-foot and taller needs a permit and may need a survey), gate count, and how much old fence has to come out first. Posts set in Fremont’s clay often need deeper footings and gravel drainage, which adds labor but prevents the lean you’re already dealing with.
What’s included in a written quote from us: post holes dug and set to depth, panels and rails hung square, gates hung and latched, old material hauled off, and the permit pulled and inspection signed where the job requires it. Parts and labor are line-itemed so you see exactly what the panels and hardware cost versus the install. The full job is backed by our 90-Day Done Right Promise, written on the contract, not buried in fine print. Every price change comes as a written change order before any work moves.

DIY or Call Us?
A homeowner can safely check a few things: whether posts are plumb with a level, whether the gate hinges are tight, and whether caps are seated. What goes wrong on a DIY install is almost always the footing. Setting a post in Fremont clay without the right hole depth and gravel base means it will lean after the first wet season, and pulling and resetting a post later costs more than doing it right once. On a full replacement, panel alignment across a long run and gate swing are where weekend installs fall apart. If you’re not sure whether the problem is a single panel or the whole footing line, call us at (833) 620-6162 for a free estimate and we’ll tell you straight.
FAQs

A properly installed Boral composite fence typically lasts 20 to 30 years in Fremont’s climate, with the posts and footings, not the panels, being the limiting factor. The composite itself handles our dry summers and wet winters well; what fails first is the footing in clay soil. Call (833) 620-6162 for a free estimate on your specific run.
Often yes. A single leaning post, a sagging rail, or a misaligned gate can usually be repaired without replacing the whole fence, and we’ll tell you honestly which it is after looking. If more than a few posts have shifted, a full reset is the better spend. Call (833) 620-6162 and we’ll give you a straight answer.
A typical residential Boral fence install in Fremont takes one to three days, depending on linear footage, gate count, and whether old fence has to be removed first. Permit timelines can add time on taller fences. Call (833) 620-6162 to schedule your free estimate and we’ll give you a realistic window.
We identify your panel profile, post cap, and rail style from the existing material and any labels, then source the matching Boral line or a quality aftermarket equivalent if the original is discontinued. We don’t carry stock on a truck, so the match is confirmed before we order. Call (833) 620-6162 to get started.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












