







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Windows & Doors: The Fremont Owner’s Guide
We install and service Boral windows and doors for Fremont homeowners, and the typical installed price lands between $4,500 and $15,000 for a standard window replacement, or $8,000 to $25,000 for impact-rated units. When a Boral window or door fails, it usually shows up as a fogged glass unit, a sash that won’t slide, or a door that drags on the threshold after years of Fremont’s dry summers and damp winters. A failed part rarely announces itself; you notice it one morning when the window won’t latch, or the glass goes cloudy between the panes and you can’t wipe it clean. Barrett & Sons Construction Fremont is an independent service provider, not affiliated with Boral, and we’ll tell you straight whether a part is worth replacing or the whole unit needs to come out.

Which Boral Models This Applies To

Boral’s window and door line has changed hands over the years, and that history matters when you’re matching a part. Most Fremont homes we see carry Boral vinyl or aluminum units installed in the 1990s through the mid-2000s, often under the Boral Windows & Doors label that later moved through different manufacturing arrangements. The first place to look is the etched or stamped label in the frame channel, usually inside the top or side jamb, sometimes on the sash itself. Write down every number on it and photograph it.
Second, measure the rough opening, the visible glass, and the sash thickness. Boral used several sash profiles across its runs, and a hardware kit that fits one profile will not seat in another even when the window looks identical from the room side. That’s the compatibility gotcha most homeowners hit: two Boral windows in the same house, built the same year, can take different balance shoes. A good aftermarket balance or lock is often fine. For tilt latches, weatherstripping, and rollers, original-pattern parts from a specialty supplier hold up better than the generic big-box equivalents, which often have thinner plastic. Where a Boral-exact part is gone, we source the closest matched equivalent and tell you plainly that’s what it is.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Windows & Doors Is Failing
- Cloudy or fogged glass that won’t wipe clean. The sealed insulated glass unit has lost its seal and moisture is between the panes. In Fremont’s temperature swings, a broken seal shows up fast, and no amount of cleaning fixes it.
- The sash won’t stay up, or slams down. The balance system has failed, usually a worn spiral or block-and-tackle balance. A window that won’t hold position is a fall risk for kids and a sign the balance needs replacing, not the whole window.
- The door drags on the threshold. In Boral sliding and hinged doors, this is typically worn rollers, a failed hinge, or a frame that has shifted with the season. Left alone, a dragging door chews its own weather seal.
- Water stains on the interior trim or sill. Failed weatherstripping, a cracked seal, or clogged weep holes let water in during winter storms. Catch it early and it’s a gasket job; wait and you’re into framing.
- The lock or latch won’t engage cleanly. Worn hardware, a misaligned keeper, or a sash that has warped slightly. A lock that doesn’t positively engage is a security concern, not just an annoyance.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Fremont, installed window replacement runs $4,500 to $15,000 depending on how many units, size, and whether we’re matching existing Boral frames or doing a full-frame swap. Impact-rated or specialty glass pushes that to $8,000 to $25,000. The range is driven by unit count, glass type, whether the frame is sound enough to hold a new sash, and access. Here’s what sits inside those numbers.
| Work | Installed Range |
|---|---|
| Single window hardware or balance repair | $180 – $450 |
| Insulated glass unit (seal failure) replacement | $350 – $900 per unit |
| Standard window replacement | $4,500 – $15,000 |
| Impact-rated window installation | $8,000 – $25,000 |
| Sliding or hinged door hardware and roller service | $250 – $700 |
We quote parts and labor as separate line items so you can see what the part costs and what the install costs. Every price change arrives as a written change order before we touch the job. Workmanship is backed by our written 90-Day Done Right Promise.
DIY or Call Us?
Some of this you can safely check yourself. Look at the label and photograph it. Test the sash by hand. Clear debris from weep holes with a soft brush. Wipe and inspect the weatherstripping for cracks. What you shouldn’t do is pull a sealed glass unit, swap a balance under tension, or try to reset a door frame on your own. A dropped sash or a glass unit that cracks during removal is a real injury risk, and a door frame that comes out of square is a much bigger repair than the one you started with. For anything past the label-and-look stage, call us at (833) 620-6162 and we’ll tell you honestly what it needs.
FAQs

Expect 20 to 30 years from the frame, but the parts wear faster: balances, weatherstripping, rollers, and sealed glass units typically need attention at the 10 to 20 year mark. Fremont’s dry summers and wet winters are hard on seals and weatherstripping specifically. Call (833) 620-6162 for an exact assessment of your units.
Often yes. A fogged glass unit, a failed balance, worn rollers, or cracked weatherstripping can be replaced on its own if the frame and sash are sound. We’ll inspect and tell you plainly which is the better call. Call (833) 620-6162 to schedule a free estimate.
A hardware or balance swap is usually a couple of hours; a glass unit or door roller job is often a half day. Full-unit replacement runs longer depending on count. Call (833) 620-6162 and we’ll give you a realistic window for your job.
We identify the model from the frame label and measurements, then source exact-pattern or closest-matched equivalents from specialty suppliers. If a Boral-exact part isn’t available, we tell you that upfront and quote the equivalent before ordering. Call (833) 620-6162 to start the match.
We also install and service KraftMaid, Cambria, and Silestone products across Fremont homes.
If your Boral window or door has a part that’s failed, don’t guess at it. Call Barrett & Sons Construction Fremont at (833) 620-6162 for a free estimate. We’ll identify the model, quote the part and labor in writing, and back the work with our 90-Day Done Right Promise. A live person answers the phone 24 hours a day, and our crew members have up to 28 years of experience matching parts to the units already in your home.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












