







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Driveway & Pavers: The Fremont Owner’s Guide
We install CertainTeed-compatible driveway and paver systems in Fremont, and a full paver driveway typically runs $7,000 to $18,000 depending on square footage, base prep, and border detail. Simple paver repairs often fit into a single visit, though we schedule around Fremont’s wet-season forecast rather than promising a same-day rush.

Owners usually find the problem the same way. A few pavers near the driveway apron start rocking when the car rolls over them. Sand washes out of the joints after a storm and the surface looks like a checkerboard of loose and tight blocks. Or a hairline crack appears along a paver that took a hit from a delivery truck. In Fremont, that failure pattern nearly always traces back to the sub-base, not the paver face. Our technicians have up to 28 years of experience reading exactly what shape the base is in. If you’re searching for a Barrett & Sons Construction Fremont crew that treats pavers as a system rather than a stack of blocks, you’ve landed on the right page. We’re an independent contractor and not affiliated with CertainTeed.
Which CertainTeed Models This Applies To

CertainTeed isn’t a single paver, it’s a family of hardscape products, and the fix depends on which one you have. Their driveway pavers fall into clay brick lines (the classic pressed units) and concrete paver lines, and each has its own thickness. The brick units generally run 2 1/4″ to 2 5/8″ thick, while the concrete pavers are commonly 2 3/8″ for driveways rated to handle vehicle loads. Getting that thickness wrong is the single biggest compatibility gotcha: a unit that’s too thin will crack again under tire weight no matter how well it’s installed.
Identify your product first. Pull a loose paver and look for the molded name on the bottom or the edge. Measure it with a tape in all three dimensions. If there’s no marking, photograph the face and note the joint pattern (running bond, herringbone, basketweave). CertainTeed pavers come in specific color blends, and matching a discontinued blend is the second gotcha. Some colors retire, and a mismatched replacement stands out for years. When the exact CertainTeed color is no longer made, we’ll show you the closest current match and let you decide before we touch the driveway.
OEM versus aftermarket: with pavers, the “part” is both the paver unit and the joint sand. For sand, a quality polymeric joint sand is a real upgrade over plain sand and works with any paver brand. For the paver itself, we source the matching CertainTeed unit where it’s still made. When it isn’t, we blend in a compatible unit from a line we also install, like Belgard or Techo-Bloc, and we do that only with your agreement in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CertainTeed Driveway & Pavers Is Failing
Here’s what Fremont homeowners actually see before they call us, and what each symptom means underneath.
- Rocking pavers near the apron. The unit has lost its bedding sand underneath, usually because the edge restraint gave way and the base shifted. Left alone, neighboring pavers loosen next.
- Sand washing out of joints every winter. Fremont’s rainy season pushes water through unprotected joints. Without a stable, sealed joint, that water reaches the base and softens it.
- Sunken or uneven sections. A localized dip means the sub-base was never compacted to the right depth or a buried utility trench settled. This is a base problem, and re-laying just the top pavers won’t hold.
- Cracked or chipped paver faces. Often from a heavy delivery truck or a dropped object, but sometimes from pavers that were undersized for a driveway. The difference matters, because replacing a weak unit with the same weak unit just repeats the failure.
- Weed growth between blocks and moss on shaded areas. Over time organic matter fills the joints where sand used to be. It’s a sign the joint system has broken down and the surface is holding moisture it shouldn’t.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed paver pricing in Fremont, with real line items so there are no mystery charges:

- Paver driveway installation (full build): $7,000 to $18,000
- Paver patio installation: $3,500 to $11,000
- Driveway sealing (protects the joint and surface system): $250 to $700
- Driveway replacement (tear-out and rebuild): $5,000 to $14,000
| Line item | Typical range |
|---|---|
| Paver units & matching sand | Included in driveway figure |
| Base excavation & compaction | Included in driveway figure |
| Edge restraint & bedding | Included in driveway figure |
| Labor, cutting, cleanup | Included in driveway figure |
What drives the number up: total square footage, how much old material has to come out, base depth needed, and whether we’re matching a discontinued CertainTeed blend. Every scope and allowance is written on the contract, and any price change arrives as a written change order before we start. The completed job carries our 90-Day Done Right Promise, and if something isn’t right, one call brings Tom back.
DIY or Call Us?
Some things are safe to check yourself. You can walk the driveway and mark rocking pavers with chalk, look for a raised or broken edge restraint, note where water pools, and pull one loose paver to read the brand and measure thickness. All of that helps us quote accurately.
Where DIY goes wrong is the base. Re-setting one paver on top of a soft or uncompacted base looks fine for a season and then fails again, and by then you’ve paid twice. Ripping out an edge restraint that’s holding load-bearing pavers without knowing how the base is built can also let the field shift. We don’t hand you a how-to for structural base work because a driveway takes real vehicle weight. If you’re unsure whether your failure is surface or subsurface, call us at (833) 620-6162 and we’ll tell you straight – estimates are free.
FAQs

The paver face usually lasts decades, but the joint and base are what determine real life, and in Fremont’s wet winters those need attention every few years. A quality polymeric joint plus periodic sealing is what keeps twenty-plus years realistic; skipping both halves that life.
Yes, in many cases. Isolated rocking or cracked units can be lifted, the bedding corrected, and the pavers re-set and re-sanded without touching the whole driveway. If the problem is a widespread soft base, patching won’t hold and we’ll tell you that honestly rather than take your money.
A small paver repair is often a half-day to a full day. A full driveway rebuild is typically three to five working days, and weather is the variable that most affects the schedule. We won’t promise a same-day job on structural work, but we will tell you the real timeline before you sign.
We identify the brand and measurement from the paver itself, then source the matching CertainTeed unit where the color is still current. If it’s discontinued, we present a compatible current match in writing before ordering. We don’t carry parts on a truck, so everything is matched to your driveway, not guessed from a sample. We also install KraftMaid, Cambria, and Silestone on other projects, but for your driveway it’s the paver system we focus on.
Call Barrett & Sons Construction Fremont at (833) 620-6162 for a free estimate and a free second opinion on any written estimate. Our technicians have up to 28 years of experience, they carry the Barrett & Sons name, and they’ll give you a written scope before a single paver moves.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












