







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Driveway & Pavers: The Fremont Owner’s Guide
If you own a CGI hardscape system, we install and service CGI-compatible driveway and paver work in Fremont at installed prices that run from $7,000 to $18,000 for a full paver driveway. We’re an independent contractor and not affiliated with CGI. Most Fremont owners don’t realize they have a problem until a paver field has shifted enough to trip them at the front step, or a joint between the drive and the garage apron has opened a channel that funnels rain sideways toward the foundation. Fremont’s clay-heavy soil up in the Mission foothills swells and shrinks with the winter water table, so base failures here show up as ripples and rockers rather than the flat cracks you’d see on sandy ground closer to the bay.

Which CGI Models This Applies To

CGI hardscape systems aren’t a single product line – the family splits across structural paver series, permeable interlocking systems, and retained-base drive profiles, and the part that fits one is often wrong for another. The fastest way to identify what you have is to lift one edge paver at the driveway margin and read the underside: CGI stamps the series code and nominal dimensions there. Ignore what the previous owner said and trust the stamp.
Legacy CGI series used a thinner nominal wall in the interlock channel and a narrower spacer bar than the current lineup, so a replacement paver from a newer run won’t seat flush in an older field even if the top dimensions look identical. That mismatch is the single most common reason a well-intentioned patch job comes apart within two winters.
You’ll find plenty of aftermarket pavers at the box stores that match CGI’s footprint. What they don’t match is the compressive strength and the joint profile, which matters in Fremont’s freeze-adjacent nights. For a patch of five or ten pavers in a low-traffic corner, a quality aftermarket equivalent can work. For a driveway you drive on every day, we source the matching CGI profile or a premium Belgard equivalent so the field moves together.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Driveway & Pavers Is Failing
- Rippling or washboarding across the drive. This is base failure, not paver failure – the compacted aggregate layer has lost its compaction under clay movement, and the surface is following it. Repacking the sand won’t fix it.
- Pavers that rock when you step on them. A rocker means the bedding sand has migrated out and the paver is sitting on a void. Left alone, water gets in the void and the problem spreads to the surrounding field.
- Joint sand washing out every spring. Fremont’s rainy season sends joint sand into the base and out the edges. If you’re refilling sand twice a year, the joint profile has widened and the interlock has lost grip.
- Visible cracks in the retaining edge or curb. The edge restraint is what holds the whole field from spreading. Once it cracks, the outer courses creep outward and open gaps at the driveway apron.
- Water pooling against the garage slab after storms. When the drive settles lower than the slab, stormwater has nowhere to go but the foundation. This is the one you don’t wait on.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Fremont homeowners actually budget for CGI-compatible hardscape work, parts and labor included:
| Work | Typical installed range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Driveway replacement | $5,000 – $14,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway sealing | $250 – $700 |
What pushes a Fremont driveway toward the top of the range: how much base excavation the clay demands, whether the edge restraint is salvageable, and how far the field has spread. Every scope, every allowance, and every price change arrives in writing before we start, and every eligible job gets its permits pulled and inspections signed. Our technicians have up to 28 years of experience on hardscape, so a failed base gets rebuilt, not covered over.
DIY or Call Us?
Safe to check yourself: lift one edge paver and read the CGI stamp, run a straight edge across the drive to find high spots, and note where water pools after the next rain. Those three checks tell us most of what we need to know on the phone.
Where DIY goes wrong on CGI pavers: re-sanding a settled joint, tamping a rocker back down, or adding a thin sand level over a failed base. It looks fixed for one dry season, then the clay underneath does its thing and you’ve spent money twice. Base failure is the hard part, and it’s also the reason you don’t see a fresh paver field fail on a properly excavated subbase. Call (833) 620-6162 and we’ll schedule a free estimate – no trip charge inside the county, and a free second opinion on any written estimate you’ve already got.
FAQs

A properly installed CGI paver field with a well-compacted base and intact edge restraint lasts 20 to 30 years here. The pavers themselves outlast the installation – it’s the base and the joint sand that need attention, usually a reseal or joint top-up every few years. Call (833) 620-6162 for an exact quote on your drive.
Often yes, if the failure is localized – a single settled corner, a cracked edge restraint, or worn joint sand. A field with rippling across the whole drive means the base has to come up, and patching over it wastes money. Call (833) 620-6162 and we’ll tell you honestly which one you’re facing, free.
A single-course repair or edge fix is often a one-day job. A full driveway replacement with proper base excavation in Fremont typically runs three to five days, depending on access and how deep the clay sits. We put the days in writing in the scope before anything moves.
We read the stamp on the underside of your existing paver, match the series against CGI’s current and legacy profiles, and order the correct run – or a premium Belgard equivalent when CGI’s line has changed since your field was laid. If we can’t match it, we tell you before you pay for the wrong paver.
If your CGI driveway is showing any of these signs, the smartest thing you can do is have someone look at it who’s been in Fremont’s clay. We keep every price in writing, pull the permits, and back the work with our 90-Day Done Right Promise. Calls are answered by a live person around the clock. Call (833) 620-6162 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












