A Barrett company - serving Fremont, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
CGI · Fremont

CGI Kitchen Remodeling in Fremont, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Fremont
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A remodeled kitchen with a waterfall island and wood cabinets
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
A new multi-panel patio door opening a kitchen to the patio
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Kitchen Remodeling: The Fremont Owner’s Guide

Kitchen remodeling with CGI cabinetry and finishes in Fremont typically runs $14,000 – $45,000 installed, depending on layout, cabinet line, and whether plumbing or electrical moves. When a CGI cabinet box, hinge, drawer glide, or door front fails, we can usually inspect and quote a fix within a day or two of your call, and most repairs are scheduled within the week. Owners in Fremont usually find the problem the same way: a drawer that suddenly sticks halfway, a door that won’t sit flush after years of opening fine, or a hinge screw that spins in stripped particleboard when you go to tighten it.

professional windows & doors service in Fremont, CA

Call (833) 620-6162

Which CGI Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

CGI is a large cabinet manufacturer with many series and door styles, and the part that fits one line often won’t fit another. The fastest way to confirm compatibility is to look inside a cabinet door for the manufacturer label, then measure the hinge cup bore (typically 35mm on European-style concealed hinges) and the drawer glide length before ordering anything. A 35mm cup hinge from one CGI series will look the same as another and fit differently once you account for door overlay and cabinet face frame versus frameless construction.

On the OEM-versus-aftermarket question: for structural pieces like cabinet boxes, drawer fronts, and door panels in a specific finish, the right match usually comes through CGI or a dealer who can pull the series number. For wear parts like hinges, glides, and shelf pins, a quality aftermarket equivalent from a known brand (Blum, for example) is often better made than the original and fits the same bore pattern. What we don’t recommend is mixing and matching without confirming the bore and overlay, because a hinge that “looks right” may bind after two weeks of use. We don’t stock parts or carry them on a truck. We source what your CGI kitchen actually needs once we’ve seen the label and measurements.

Barrett & Sons Construction Fremont is an independent service provider and is not affiliated with CGI. We also install and service KraftMaid, Cambria, and Silestone cabinetry and countertops.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Kitchen Remodeling Is Failing

  • Drawer glides that grind or stick. The bearing race inside the glide has worn or picked up grit. In Fremont kitchens with tile floors and daily cooking, this is the first part to go, usually within 8 to 12 years of heavy use.
  • Doors that won’t sit flush. The concealed hinge has lost tension or the mounting plate has shifted. This shows up as a top corner that stands proud while the bottom sits tight, and it gets worse as the season changes.
  • Hinge screws that spin loose. Particleboard around the screw hole has stripped from repeated opening and closing. This is the most common reason a door eventually falls off, and it can be repaired with a wood insert rather than a full door replacement.
  • Cabinet box swelling or soft spots. Moisture has crept into the substrate, usually near the sink or dishwasher. On a CGI box this often means a panel replacement rather than a refinish, because swollen particleboard doesn’t come back.
  • Peeling or chipped door finish. The laminate or painted face has lifted at an edge. Left alone, moisture gets under the finish and the chip spreads, which is why we look at it early rather than late.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what Fremont homeowners actually pay for the work we do on CGI kitchens, as installed ranges, not parts-only prices:

Work Installed range in Fremont
Kitchen remodel (full scope) $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What pushes you toward the top of a range: cabinet line and door style, whether plumbing or electrical has to move, and whether we’re matching a finish to an existing run. Parts and labor are quoted separately and in writing, so you see what the hinge costs and what the install costs. Every eligible job gets permits pulled and inspections signed. Every completed job is backed by our written 90-Day Done Right Promise: if something isn’t right, one call brings us back. Ask about the Free Second Opinion on Any Written Estimate and the permanent 10% Senior & Veteran discount.

professional windows & doors service in Fremont, CA

DIY or Call Us?

Some things you can safely check yourself. Open a door that won’t close and look at whether the hinge plate has shifted; loosen and retighten the plate screws to see if the door lines up. Pull a drawer out and check the glide for grit or a bent track. Those are safe, reversible checks. Where DIY goes wrong: replacing a stripped hinge screw with a bigger screw, which splits the panel; swapping a 35mm hinge for one with a different overlay, which binds the door; or trying to re-glue a swollen cabinet box that will keep swelling. Cabinet boxes also sit near plumbing and electrical, so anything behind the cabinet face should be handled by someone who knows what’s back there. If you’ve already tried a fix and it didn’t hold, call us at (833) 620-6162. Estimates are free and we’ll tell you plainly what needs replacing and what doesn’t.

FAQs

A remodeled hall bathroom with patterned floor tile and painted walls

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A single-story rear room addition with tall windows and a new patioA new clay tile roofNew double-hung windows in a dining roomA new front yard fence with a matching gateA new curved paver walkway to the front porchA walk-in shower with large-format tile and a built-in niche

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Barrett in Fremont

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Fremont team

A local vetted partner works across Fremont and the towns around it, to the same written standard as every Barrett job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 620-6162
Local Service Coverage

Request a Free Estimate in Fremont

Tell us what you need - Barrett & Sons Construction Fremont responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch