







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Los Altos, CA | Barrett & Sons Construction Fremont
We provide independent CGI service across Los Altos, and the one thing that makes our CGI work here different is fit: the city’s floor-area-ratio and second-story massing rules often keep a kitchen or bath inside its original footprint, so CGI cabinets and countertops have to be specified to tight, existing dimensions instead of a roomy new layout. We work with CGI cabinets and quartz every week in Los Altos, and we know which door styles, edges and trims hold up to the town’s dry-season swings. This is planning work as much as building work. To price yours, call (833) 620-6162.

Why Los Altos Residents Choose Us for CGI Service

Barrett & Sons Construction Fremont is an independent local provider. We are not affiliated with or authorized by CGI, and we say that plainly because it matters: you’re getting a contractor who knows the brand’s real-world behavior, not a dealer reading from a catalog. That independence lets us tell you when a CGI product fits your job and when a different spec is the smarter buy.
We’ve handled CGI products long enough to know the quirks. Frameless boxes that rack on an unlevel slab. Quartz that chips at an undermount cutout when the overhang isn’t fully supported. Full-overlay doors that start rubbing six months after install because nobody scribed the cabinet to the floor. Our crew members carry up to 28 years of experience, and every eligible job gets permits pulled and inspections signed. Scope, allowances and any price change arrive in writing before work starts. If something isn’t right within 90 days, Tom comes back and makes it right on one call.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in Los Altos
- Frameless boxes racking on settled slabs. Most Los Altos ranches sit on slab-on-grade that’s had fifty or sixty years to move. A CGI frameless cabinet set down without shimming and scribing will twist, the back panel separates, and the doors stop aligning. We level and shim each box before anything gets fastened.
- Soft-close hardware failing early. Dry, dusty remodels wear hinges and glides fast, especially when cabinets go in before the HVAC is balanced and the house is still full of grit. Mechanisms start slamming or sticking within a few years. We adjust and replace hardware as part of the finish work.
- Quartz chipping at the sink or seating edge. A CGI quartz top needs full substrate support over a dishwasher or an island overhang. Skip it and the slab chips at the undermount cutout. A plywood subtop under the whole span prevents it.
- Door finishes blistering near the range. Tight Los Altos kitchen footprints push cabinets close to cooking surfaces. Without proper clearance and ventilation, painted and foil-wrapped doors blister or peel. We check clearances before we set the layout.
- Doors rubbing after load. Once a kitchen is full of dishes, a cabinet that was fine empty can shift. We come back after loading and adjust hardware rather than sell you new boxes.
CGI Service in Los Altos: What Local Conditions Mean for Your Equipment

Here’s the fact that shapes almost every CGI kitchen in this town: Los Altos enforces floor-area-ratio and single-story-to-second-story massing rules through a small planning and building department that reads every submittal closely, and the result is that most remodels stay inside the original footprint. You’re not expanding the kitchen to fit the cabinets. You’re fitting the cabinets to the kitchen you already have, often to the inch. That’s the opposite of how it works in neighboring towns with looser lot-coverage limits, where a remodel can add square footage and open the plan up. In Old Los Altos and the Country Club area, the constraint rarely comes from weather; it comes from the code and from neighbors organized enough to appeal anything that doesn’t match the street. So we measure the existing room, spec CGI boxes to those dimensions, and plan the countertop support around the layout you’re keeping. It’s slower at the front end. It’s also why the doors still close cleanly two years later.
A typical Los Altos kitchen remodel in a 1950s ranch often starts with CGI frameless cabinets being set on a slab floor that has settled unevenly over decades, so installers must shim and scribe each box to keep doors aligned. When a quartz CGI countertop is added over a reconfigured island, the slab needs full substrate support at overhangs to prevent chipping at the sink or seating edge. The usual fix is a laser-level check, plywood subtop, and hardware adjustment after the cabinets are loaded, not a cabinet replacement.
CGI Models & Products We Service in Los Altos
We work with CGI Euro-style frameless cabinets, full-overlay and soft-close, along with the shaker and slab door styles that suit the postwar ranches around Los Altos. On the surface side, we install CGI quartz (engineered stone) in the edge profiles that hold up best to daily use, and we handle CGI porcelain and ceramic tile lines for backsplashes and floors. We don’t claim local stock. Parts are ordered to the job. For hinges, glides and matching touch-up finishes, OEM parts are our first choice because color and fit line up. When OEM is backordered, high-quality aftermarket soft-close hardware is a reliable substitute. Repair beats replacement when it’s only hardware or a single door; full box replacement makes sense when water damage or structural racking runs through the run.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Los Altos
What drives cost here is fit and support: the leveling and scribing a settled slab demands, the subtop under quartz overhangs, and the extra measuring that comes with keeping a remodel inside its existing footprint.
| Service | Typical Range |
|---|---|
| Full Kitchen Remodeling | $14000 – $45000 |
| Cabinet Installation & Refacing | $4000 – $13000 |
| Quartz & Granite Countertops | $2000 – $6500 |
| Backsplash Installation | $800 – $2500 |
| Kitchen Island Installation | $3000 – $10000 |
Your free estimate includes a measured walkthrough, a level check on the floor, and a written line-item scope with allowances spelled out. Any price change comes to you as a written change order before work moves. Call (833) 620-6162 for an exact quote on your Los Altos kitchen.

Serving Los Altos, CA – Our Local Coverage Area
We serve Los Altos and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Los Altos
Yes. Frameless boxes can be installed on a settled slab, but each cabinet has to be shimmed and scribed to bring the box square and plumb before fastening. Skipping that step is what causes racking and door rub. We do a laser-level check first. Call (833) 620-6162 to schedule a free estimate.
They can. Floor-area-ratio and massing rules often mean the kitchen stays in its existing footprint, so layouts are sized to the room you have rather than an expanded plan. That steers cabinet dimensions and island size. Call (833) 620-6162 and we’ll walk your space and tell you what fits.
Usually a box set out of level on a settled 1950s slab, or hardware that drifted after the cabinets were loaded. Both are adjustable. It’s rarely a reason to replace cabinets. Call (833) 620-6162 for a look.
Full substrate support under the whole slab, especially across the dishwasher opening and any overhang. A plywood subtop plus a level check before the top is set prevents most chipping at the undermount cutout. Call (833) 620-6162 for an exact quote, estimates are free.
Yes, and the tight footprint is exactly where full-overlay frameless boxes earn their keep, since they use the interior space fully and keep door reveals clean. The key is measuring to the inch. Call (833) 620-6162 to schedule your free estimate.
Service Areas Near Los Altos

We also work nearby in Fremont, Newark, Union City, Sunnyvale and Santa Clara, and out toward Los Altos Hills and Mountain View. If you’re outside those lines, call and we’ll tell you straight whether we cover your street.
For more on how we handle the brand, see our CGI service page, and for the full scope of what we do around town, our Los Altos service area page lays it out.
Book Your CGI Service in Los Altos Today
Tell us the room, the cabinet style and what’s bothering you, and we’ll put a written scope in front of you. We’re an independent CGI provider, not affiliated with or authorized by CGI, and we’re glad to say so. Call (833) 620-6162 to schedule your free estimate.
Written by the team at Barrett & Sons Construction.












