







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Driveway & Pavers: The Fremont Owner’s Guide
CWS (Concrete World Supply) pavers and driveway systems installed around Fremont typically run $7,000 – $18,000 for a full paver driveway, or $3,500 – $11,000 for a paver patio, depending on square footage, base prep, and border detail. When a CWS paver surface starts failing, the first sign is usually a hairline crack that spreads along a joint line within one rainy season, or a single paver that rocks when you step on it near the driveway apron. Most Fremont owners notice the rocking first, then the sand washing out from the joints, then the weeds. We see this constantly on driveways in Centerville and Irvington, where the soil is heavy clay and shifts with every wet winter.

Which CWS Models This Applies To

CWS parts and pavers aren’t tied to a model number the way a garage door opener is. They’re tied to a paver series and a nominal size. The CWS driveway and paver lines most common on Fremont properties are the 60mm thick interlocking pavers (standard for driveways that see vehicle traffic) and the 40mm patio pavers (for walkways and patios that don’t take cars). If you’re matching an existing paver for a spot repair, measure the actual face dimension of one paver, not the nominal listing size. A “6×9″ paver often measures 5 7/8″ x 8 7/8” once the joint space is accounted for, and mixing nominal and actual sizes is the number one reason a repair patch looks off from the rest of a CWS driveway in Fremont.
On the OEM-vs-aftermarket question for CWS specifically: when the paver series is still in production, we source the exact CWS profile so the color and texture match. When it’s been discontinued (happens every few years as CWS rotates its colorways), the honest answer is that no aftermarket paver will be a perfect match. In that case we either harvest a few pavers from an unobtrusive corner of the existing driveway to patch the visible area, or we recommend a border band or accent paver to intentionally break up the patch. Barrett & Sons Construction is an independent service provider and is not affiliated with CWS.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Driveway & Pavers Is Failing
- Rocking pavers near the driveway apron or garage door. This usually means the base sand layer has settled or washed out. Fremont’s clay soil holds water in winter and shrinks in summer, and that cycle pulls the bedding sand out from under the pavers over a few seasons.
- Joint sand washing out after rain. If you’re sweeping sand back into the joints every spring, the pavers aren’t locking together the way they should. The polymeric joint sand has broken down, or the base wasn’t compacted to spec when the driveway was first built.
- Hairline cracks spreading along the joint lines. Cracks that follow the joints rather than cutting across a paver usually point to a base problem, not a paver problem. The paver itself is fine; what’s underneath it is not.
- Weeds sprouting in the joints. Weeds are a symptom, not a cause. They grow where the joint sand is gone and moisture is pooling, and that pooling is also what’s undermining the base.
- Sunken or heaved sections after a wet winter. Fremont gets the kind of rain that exposes a base that was under-compacted. If a whole section drops or lifts, that’s a base failure, and repacking sand on top of it won’t hold.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what CWS driveway and paver work actually costs around Fremont, with the ranges we quote and the same ranges we hold to once the contract is signed:
| Work | Installed range (Fremont) |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
What drives the range: square footage, how much base has to be excavated and replaced, whether the driveway needs a permit, and whether the paver series is still available or has to be matched from existing stock. Every scope and every allowance goes in writing before work starts. If the base turns out deeper or worse than the estimate showed, that price change arrives as a written change order before we touch it. Every eligible job gets permits pulled and inspections signed.
DIY or Call Us?
An owner can safely pull up a single rocking paver, brush out the old sand, and see what the base layer looks like underneath. You can sweep new joint sand into gaps and re-seal the surface. That’s the safe DIY tier.
Where DIY goes wrong on a CWS driveway is the base. Replacing a paver without recompacting the base under it just resets the same failure for next winter, and pulling up a section without knowing how the pavers interlock can crack a paver face that was otherwise fine. Swapping a whole sunken section is a crew job, not an afternoon job, and it’s where a homeowner ends up with a patch that’s a different height from the rest of the driveway. Call Barrett & Sons Construction Fremont at (833) 620-6162 for a free estimate before you pull up more than one paver.
FAQs

A properly built CWS paver driveway, with a compacted base, correct joint sand, and grading that drains away from the garage, holds for 25 to 30 years in Fremont’s climate. The pavers themselves outlast the base. Most failures we see in Fremont are base failures at year 8 to 12, usually from under-compacted gravel or from a driveway that sheds water toward the slab instead of away from it. Call (833) 620-6162 for a free estimate on a base rebuild.
Often, yes. A single rocking paver, a sunken section, or missing joint sand can be repaired without replacing the whole driveway, and that’s usually the right call if the underlying base is still solid. We check the base first, because repacking sand on top of a failed base is the most common way a repair goes to waste. Call (833) 620-6162 for a free estimate and we’ll tell you honestly which one you’re looking at.
A spot repair on a CWS paver driveway takes a day, sometimes two if the base has to be re-excavated and recompacted. A full driveway replacement runs three to five working days, more if a permit is required. The timeline goes in writing with the scope, so you’re not guessing when the crew shows. Call (833) 620-6162 to schedule your free estimate.
We match the paver series and actual face dimension first, using a sample from your existing driveway, then confirm whether that colorway is still in production. If it’s been discontinued, we harvest from a hidden corner or design an intentional border rather than force a mismatched patch. We don’t claim to carry stock of parts or pavers on a truck. Call (833) 620-6162 for a free estimate and we’ll bring a sample to the walkthrough.
If your CWS driveway has a rocking paver, a sunken section, or joint sand that won’t stay put, call Barrett & Sons Construction Fremont at (833) 620-6162 to schedule your free estimate. We also service KraftMaid, Cambria, and Silestone products on the interior side of the house, and yes, the driveway is the first thing guests see, so let’s get it right. Our crews bring the CWS paver knowledge, written scope, and a 90-Day Done Right Promise on every job.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












