







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Home Additions & ADU: The Fremont Owner’s Guide
If you own a CWS-built addition or ADU component in Fremont that’s failing, we replace it with a CWS-compatible part matched to your model, and installed additions of this scope in Fremont typically run $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU. These are planned builds, not same-day swaps: a real addition or ADU takes weeks of permitting and construction, and anyone who tells you otherwise is selling you something. The honest truth is that most Fremont owners don’t discover a failing component in isolation. They notice it during a punch-list walk, a failed inspection, or the first rainy season when a roofline, a window frame, or a foundation detail from the original build starts to show its age.

We’re an independent contractor and not affiliated with CWS. We work on their builds because we know the assemblies and the local code well, and we’ll tell you plainly when a repair makes more sense than a rebuild.
Key Takeaways
- Fremont additions typically run $45,000 – $130,000; ADUs run $90,000 – $220,000.
- We install CWS-compatible components matched to your specific model and assembly.
- Every eligible job gets permits pulled and inspections signed.
- Written change orders before any scope change, every time.
- Backed by the 90-Day Done Right Promise.
Which CWS Models This Applies To

CWS has shipped residential addition and ADU assemblies across several series over the years, and the part that fits one generation won’t fit the next. The most common compatibility gotcha we see in Fremont is a pre-cut window or door rough opening sized to an older CWS frame spec that no longer matches the current header and flashing detail. If you’re ordering a replacement component, the plate or stamp on the original build paperwork is your first stop, not a guess from the showroom floor.
To identify the right part:
- Find the model or assembly number on the original build documents, plans, or the plate CWS leaves on the structure.
- Measure the rough opening, not the finished face. Framing dimensions drive which replacement fits.
- Photograph the existing detail and any part numbers stamped on the frame or hardware before you call.
On the OEM-versus-aftermarket decision: an OEM replacement gets you an exact fit and the original spec, but it can carry a lead time and a premium. A quality aftermarket equivalent can match or beat the OEM on lifespan if it meets the same spec range, and for most Fremont owners the aftermarket route is the smart one as long as the dimensions and load ratings match. We don’t carry stock of parts and we don’t keep parts on a truck. We source what your build needs once we’ve confirmed the model, and we tell you which route we recommend and why before anything is ordered.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Home Additions & ADU Is Failing
These are the symptoms that bring Fremont owners to us, and what’s usually behind each one:
- Water staining at a roofline or wall junction. Failed flashing or a dried-out sealant joint is letting Bay Area rain in. Left alone, it rots the sheathing behind the finish, so it’s a repair-now problem, not a next-year problem.
- Sticking or misaligned doors and windows. On an addition, this often signals slight settlement or a header that’s deflecting. It’s worth checking the framing, not just adjusting the hardware.
- Cracks in drywall at seams and corners. Seasonal movement in Fremont’s clay soils is common, but diagonal cracks at openings point to structural movement that shouldn’t be ignored.
- A cold or drafty room in the addition. Insulation gaps, a failed window seal, or an HVAC run sized wrong for the space. Comfort issues usually trace back to one of those three.
- Failed inspection paperwork from the original build. If the build wasn’t signed off, a future sale or a refinance can stall. We see this more than you’d think, and it’s fixable with a proper permit and inspection.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s how the numbers land for Fremont, with line-item ranges so you can price before you commit:
| Scope | Installed Range |
|---|---|
| Home Addition (single story, typical) | $45,000 – $130,000 |
| ADU Construction (full unit) | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What drives the range: square footage, foundation type (Fremont’s expansive soils often mean engineered footings), whether you’re tying into existing utilities versus running new, and finish level. A garage conversion is the cheapest ADU path because the shell already exists. Parts and labor are quoted separately in writing, so you see what the component costs and what the install costs. Every eligible job includes permits pulled and inspections signed, and the work is backed by the 90-Day Done Right Promise.
DIY or Call Us?
There’s a safe split. An owner can check the visible stuff: look for water staining, feel for drafts, note which doors stick, and pull out the original build paperwork to find your model number. That’s useful homework, and it helps us quote accurately.
But the structural work on an addition or ADU is where DIY gets expensive and dangerous. Opening up a wall to chase a leak, re-flashing a roofline, or re-framing a deflecting header are jobs that involve load paths, and a mistake there can weaken the structure or fail an inspection you’ll need at resale. Our crew members carry up to 28 years of experience on builds like yours, and they’re background-checked. If a symptom on the list above matches what you’re seeing, call us. We’ll do a free second opinion on any written estimate you already have, and there’s no trip charge inside the county.
FAQs

A properly installed CWS addition assembly, kept sealed and flashed, should hold up for decades in Fremont’s climate, but exposed sealant joints and flashings need checking every few years because the wet winters and dry summers work them hard. Lifespan comes down to maintenance as much as the part itself, and a failed joint caught early is a cheap fix. Call (833) 620-6162 and we’ll tell you what we’re seeing before it becomes a rebuild.
Often yes, and we’ll tell you honestly when a repair is the smarter call. Flashing, sealant, and limited framing fixes can be repaired without tearing into the whole assembly, but if the damage has spread to sheathing or the header, a targeted replacement is usually cheaper over the long haul. We take a free second opinion on any written estimate, so you can find out before you commit. Call (833) 620-6162 for a free estimate.
A targeted repair can be a few days; a full addition or ADU runs several weeks to a few months once permits are pulled, and we don’t pretend otherwise. The timeline depends on scope, permit turnaround with the city, and inspection scheduling. What we do promise is a written schedule up front and a written change order before any scope change touches the job. Call (833) 620-6162 to schedule your free estimate.
We confirm your model and assembly from your build paperwork and measurements first, then source the OEM part or a spec-matched aftermarket equivalent once we know exactly what fits. We don’t keep a stock of parts or carry them on a truck, so nothing gets ordered on a guess. If you already have a written estimate, we’ll give you a free second opinion on it. Call (833) 620-6162 for your free estimate.
When your CWS addition or ADU needs attention in Fremont, the fastest way to an honest answer is a call. We quote in writing, pull the permits, and stand behind the work with the 90-Day Done Right Promise. Call (833) 620-6162 to schedule your free estimate, and ask about our published offers: $40 off any repair over $200, free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% Senior & Veteran discount. We also handle KraftMaid, Cambria, and Silestone finishes on the interior work that often comes with these builds.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












