







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fremont Homeowners Choose ES Windows Construction
We provide independent ES Windows construction service in Fremont: diagnosing failed vinyl and aluminum units, re-flashing and re-glazing them, and replacing the ones that are past saving. What sets our ES Windows work apart is that we’ve opened enough of these units to know how they were built – how the sash seats, how the head flashing was or wasn’t done, how the glazing bead behaves after years of East Bay sun. ES Windows has no affiliation with us and doesn’t authorize our work; we’re an independent service provider, not a dealer. That independence is the point. You reach Barrett & Sons Construction Fremont at (833) 620-6162, and a live person answers.

Why Trust Barrett & Sons Construction Fremont for Your ES Windows Construction?

Our technicians have up to 28 years of experience, and a good stretch of that has been spent inside ES Windows vinyl single-hung and double-hung units, vinyl sliders, and aluminum fixed and awning windows. That matters because ES Windows units have their own fabrication habits – specific glazing bead profiles, specific anchor spacing on the aluminum frames, a particular way the sill pan was supposed to sit. An independent crew that has re-glazed and re-anchored these units knows those habits and fixes them without waiting on a manufacturer callback.
We match OEM ES Windows sash, glazing bead, weatherstripping and hardware wherever the frame geometry is still sound, because aftermarket vinyl profiles rarely seat correctly in an ES frame. We work warranty-safe: our repairs don’t cut into the rough opening or alter the frame in ways that give a manufacturer an easy out. Every eligible job gets permits pulled and inspections signed. Every price change arrives as a written change order before we touch anything. And every job is backed by the written 90-Day Done Right Promise – if it’s not done right, one call brings Tom back.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common ES Windows Construction Problems We Fix in Fremont
Fremont’s housing runs from 1950s-60s ranch and Eichler-style stock through newer infill, and ES Windows units show up across all of it. The failures below are the ones we see most.
- Failed or shrunken glazing seals and perimeter caulk on vinyl units. Sun bakes the perimeter sealant until it pulls away from the stucco, and wind-driven rain gets past the frame. In Fremont’s rain-shadowed valley, a summer of dry heat sets the failure up and the first real storm of the wet season finds it.
- Vinyl sash and frame warp or sag. Years of East Bay sun exposure bows the sash, so it stops latching square and air leaks around the meeting rail. You feel it as a draft and hear it as a rattle in the wind.
- Missing or reversed head flashing and no sill pan. Common on ES Windows units installed during older remodels, and the cause of water showing up on interior drywall and trim before anyone notices the caulk line outside. Stucco walls hide the damage until it’s inside.
- Corroded or undersized anchors on aluminum-frame units. The fixed and awning frames work loose, the weatherstripping flattens, and the unit rattles and drafts at the edges – worse on homes near the bay shoreline where the marine air works on the metal.
- Fogged insulated glass units (IGUs). The seal between panes fails and moisture clouds the glass. It’s a glazing failure, not a frame failure, and sometimes the glass unit alone can be swapped.
Here’s how it usually goes. An ES Windows vinyl slider or single-hung in a Fremont stucco wall starts letting water in at the head or sill. Often the homeowner finds soft drywall or stained trim inside before noticing the exterior caulk line. The cause is failed perimeter sealant, a missing or reversed head flashing, or a sill pan that was never installed – made worse by a warped sash that no longer closes tight. A qualified local pro pulls the interior trim to check for rot, re-flashes and re-seals the opening, replaces the failed glazing or the sash, and only recommends full unit replacement when the frame is warped or the rough opening is water-damaged.
ES Windows Parts & Our Repair-vs-Replace Approach

Parts get sourced per job – we match them to your specific ES Windows series and frame, we don’t claim to stock them. Where the frame geometry is sound, OEM sash, glazing bead, weatherstripping and hardware go back in, because aftermarket vinyl profiles tend to seat poorly and leak again. When frames are warped, glazing is fogged past repair, or the flashing was never done right, replacing the unit is the honest call. Patching a compromised opening just moves the water somewhere else.
That decision is yours to make with a written line-item quote in front of you. Call (833) 620-6162 for a straight answer on your ES Windows unit.
Our ES Windows Service Process – Step by Step
- 1
Diagnosis. We identify the ES Windows series, open the unit, and check the glazing bead, sash square, perimeter sealant, head flashing and sill pan. Interior trim comes off where water damage is suspected.
- 2
Repair or install. Re-glaze, re-flash, re-anchor or replace the sash – or set a new unit, squared and shimmed, with a proper sill pan and head flashing against the stucco.
- 3
Test. Operate the sash and check the latch, run a water test at the head and sill, and confirm no air infiltration at the meeting rail and edges.
- 4
Warranty and closeout. We walk the finished work with you, hand over the written terms, and back it with the 90-Day Done Right Promise. Permits pulled and inspections signed where eligible.
See the difference
Before
After
Before
After
Before
AfterES Windows Products We Service & Install in Fremont
We work on ES Windows vinyl single-hung and double-hung replacement units, vinyl sliding patio doors, aluminum-frame fixed and awning windows, and the custom picture and casement configurations common in Bay Area infill. That covers the units turning up in Fremont’s 1960s-90s tract housing and infill rebuilds, plus new installs where a homeowner is replacing aging originals. We service and replace – we don’t claim to stock any of it.
We Also Service These Brands
Windows are one piece of what we do. We install and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures, and we handle roofing, additions and ADUs across Fremont. When a window leak has rotted the trim and softened the drywall, the repair often touches trades beyond the window itself – and we can carry that work in one written scope.
FAQs – ES Windows Construction Service in Fremont

Yes. We source OEM ES Windows sash, glazing bead, weatherstripping and hardware matched to your specific series and frame – we order per job rather than stocking them locally. Call (833) 620-6162 and we’ll confirm what your unit needs.
Because the seal on the insulated glass unit (IGU) has failed, letting moisture between the panes. It’s a glazing failure, not a frame problem, and the glass unit alone can often be replaced without pulling the whole window. Call (833) 620-6162 for an assessment.
Most often it’s the installation details – failed perimeter sealant, a missing or reversed head flashing, or no sill pan – not the window unit itself. Fremont’s wet-season storms expose those gaps fast. A pro needs to open the wall at the head and sill to know for sure. Call (833) 620-6162 for a look.
Yes. Roofing work at a wall or eave can disturb the head flashing and sealant that keep your ES window dry, so the window-to-wall junction has to be re-flashed and re-sealed as part of the roof job. Cutting corners there is how a roof repair turns into a window leak. Call (833) 620-6162 to scope both together.
It can be, depending on your exposure and what you’re trying to solve – impact-rated glazing adds storm and intrusion resistance, and it holds up better against wind-driven rain. Whether it’s worth it over a re-glaze depends on the frame condition. Call (833) 620-6162 for a free second opinion on any written estimate.
Here are typical ranges for the work we do on and around ES Windows in Fremont:
| Service | Typical Fremont range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
Every quote is written line by line, and any price change comes as a written change order before work starts. Call (833) 620-6162 for an exact quote – estimates are free.
Book Your ES Windows Service in Fremont, CA
If your ES Windows unit is leaking, fogged, or not latching right, get it looked at before the next storm finds it. Call Barrett & Sons Construction Fremont at (833) 620-6162 to schedule your free estimate. We serve Fremont and the surrounding East Bay, back every job with the written 90-Day Done Right Promise, and answer the phone with a live person, day or night.
Written by the team at Barrett & Sons Construction.












