







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Home Additions & ADU: The Fremont Owner’s Guide
If you’re planning an IKO-spec home addition or accessory dwelling unit in Fremont, you’re looking at $45,000 – $130,000 for a home addition and $90,000 – $220,000 for a full ADU, depending on size, foundation work, and finish level. We build both, and we pull every permit the City of Fremont requires before the first shovel goes in.

The trouble usually shows up long before the framing goes up. An owner gets three phone quotes, picks one, and then the real number arrives after the concrete is poured. Or worse: the project stalls because the contractor never filed for the ADU permit and the city red-tags the site. About half the calls we get about additions in Fremont start with “the last guy said permits were optional.” They aren’t. Every scope, allowance, and price change on a Barrett & Sons job arrives in writing before work moves, and the permit inspector signs off at the end because that signature protects you, not us.
Which IKO Models This Applies To

IKO is best known in Fremont for roofing underlayment, waterproofing membranes, and the weather-barrier products that sit under your addition’s roof and exterior walls. On an IKO home addition or ADU, the products you’ll touch most are IKO’s roof underlayments (Stormtite, Armourbase), self-adhered membranes, and the ice-and-water shield that runs along your roof valleys and eaves. These matter in Fremont because our wet winters and occasional wind-driven rain push water sideways under shingles that a cheap barrier won’t stop.
Identify your IKO product before you shop for a replacement. Look for the printed roll label (usually on the inside of the cardboard core), and note the product name, the roll width, and any UL classification printed on the edge. IKO’s self-adhered membranes come in a few widths, and getting the wrong one means a seam that doesn’t lap correctly against your existing barrier.
The OEM-versus-aftermarket call is straightforward here: IKO-brand membranes cost more, but they’re the safest match when the rest of your roof assembly is already IKO. A quality aftermarket equivalent works fine for small repair patches, but on a full addition we spec the full IKO system so the layers mate as designed. Barrett & Sons Construction Fremont is an independent contractor, not affiliated with IKO; we simply install their products because they hold up in our climate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Home Additions & ADU Is Failing
- Water stains on the addition’s ceiling or the wall shared with the house. Usually a membrane seam that never lapped correctly, or an underlayment that was installed in cold weather and didn’t seal.
- Peeling or bubbling underlayment visible from the attic. IKO self-adhered membranes need a clean, dry deck. Dust or moisture during install leaves the adhesive weak, and it lifts within a couple of seasons.
- Ice damming at the eaves in a cold snap. A missing or thin ice-and-water shield lets meltwater back up under the shingles. Fremont sees this more than people expect on north-facing roof sections.
- Musty smell in the new ADU living space. Often a barrier gap where the addition ties into the main house wall. That seam is the number one leak point on every addition we open up.
- Visible moisture barrier tears near penetrations. Vents, pipe boots, and skylight curbs cut through the membrane. If the installer didn’t patch the barrier around them, water finds the gap fast.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the honest picture for Fremont. A failing barrier or underlayment on an addition isn’t usually a line-item replacement; it’s part of a larger system. That said, the installed cost to correct and re-seal the roof assembly on a small addition typically runs $1,800 – $6,500, and a full tear-off-and-reinstall of the addition’s roof system lands in the $8,000 – $20,000 range depending on square footage and whether the sheathing needs replacement. A full home addition starts at $45,000; a full ADU starts at $90,000.
What drives the range: roof pitch, access, whether the existing membrane is IKO or something else, and how much of the fascia and trim has to come off to reach the deck. We give line-item quotes: materials, labor, permit fees, and any allowances spelled out on paper. If something changes after the job starts, it’s a written change order before the work moves. Every completed job is backed by the written 90-Day Done Right Promise.
DIY or Call Us?
You can safely check a few things yourself. Look at the roof from the ground with binoculars for lifted or bubbling barrier. Check the attic for water stains after a hard rain. Read the roll label on any leftover IKO product so you know exactly what’s on the roof.
What you should not do is climb up and try to re-seal a self-adhered IKO membrane on a pitched roof. Those rolls are heavy, the adhesive is unforgiving once it touches the deck, and most falls on residential roofs happen on short, “easy” climbs. A membrane that isn’t rolled flat and pressed correctly will fail again inside a season. The proper fix is a full assessment up top, and that’s the part we do on every estimate.
Call (833) 620-6162 and we’ll schedule a free second opinion on any written estimate you’ve already got. If we spot the same problem your current contractor did but disagree on the fix, you’ll know before you spend a dime.
FAQs

How long does an IKO roof membrane last on a Fremont addition? Ten to twenty years if it’s installed correctly over a clean, dry deck and paired with proper flashing. In Fremont’s wet-winter, dry-summer cycle, seams are the first thing to check: a bad seam fails in two or three seasons, a good one outlasts the shingles above it.
Can the membrane be repaired instead of replaced? Sometimes, yes. Small tears and isolated seam failures can be patched with a compatible IKO membrane and adhesive. Larger areas with repeated leaks or a barrier that’s more than a decade old usually warrant full replacement, because you’re chasing the next seam six months down the road.
How long does the swap take? A repair on a small section is usually a one-day job. A full barrier replacement on an addition’s roof runs two to four days, weather permitting, and we never leave the roof open overnight without a temporary weather barrier in place. Call (833) 620-6162 for a firm timeline on your specific project.
How do you source the IKO parts? We source from authorized IKO distributors and match the exact product spec printed on your existing roll. If the specific IKO product is discontinued, we’ll tell you the closest current replacement and explain in writing how it mates with your existing assembly. No mystery brands off a van. Estimates are free.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












