







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Home Additions & ADU: The Fremont Owner’s Guide
If you’re planning a KraftMaid-finished addition or ADU in Fremont, the installed cost runs $45,000 – $130,000 for a home addition and $90,000 – $220,000 for a full ADU, and a garage conversion sits between them at $30,000 – $80,000. KraftMaid is cabinetry, so the “KraftMaid” part of this project is the cabinet package in your new kitchen, bath, or kitchenette – and that’s where we focus. Most Fremont owners come to us after a national outfit quoted a cabinets-and-labor number over the phone, then handed them a different bill at the door when the ADU was framed and drying in.

We work with independent local professionals who install KraftMaid cabinetry to spec across Fremont. Barrett & Sons Construction is an independent service provider and is not affiliated with KraftMaid.
Key Takeaways
- Typical installed range for this project in Fremont: $45,000 – $130,000 (additions); ADUs run $90,000 – $220,000.
- The KraftMaid portion is cabinetry – we confirm series, door style, box size, and finish before a single box is ordered.
- Every scope, allowance, and price change arrives as a written change order before work happens.
- Permits pulled and inspections signed on every eligible addition and ADU job in Fremont.
- Backed by the written 90-Day Done Right Promise – if it’s not done right, one call brings Tom back.
Which KraftMaid Models This Applies To

KraftMaid cabinetry shows up in three broad lines homeowners will recognize: the semi-custom series sold through home centers and dealers, the full-access and framed lines in the premium tier, and the value-priced lines that appear in older remodels. The label is your first stop. Pull open a drawer and look inside the box – KraftMaid prints a specification sticker with the series name, box dimensions, and finish code. If the sticker is gone, measure the cabinet width, depth, and door overlay. A 12-inch-deep wall cabinet is a different part from a 24-inch base, and a full-overlay door will not hang correctly on a framed box that was set up for a standard overlay.
The OEM-versus-aftermarket call matters more on KraftMaid than on entry-level brands. KraftMaid’s hinges, drawer glides, and shelf supports are proprietary enough that a generic big-box replacement often fits loose or binds after a season. When the original part is still in production, we source the OEM. When it isn’t, we spec a quality aftermarket equivalent rated for the cabinet’s weight and door thickness – and we tell you which one you’re getting, in writing, before we order.
One compatibility gotcha Fremont owners run into: KraftMaid changed hinge cup bore dimensions across production years, so a replacement hinge from a decade-old set won’t drop into a newer door bore without a conversion plate. Measure the bore, not just the door.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Home Additions & ADU Is Failing
- Doors that sag or rub the frame after a year. This is almost always a hinge that lost tension or a mounting screw that pulled from soft particle board – common when a cabinet sits against an exterior wall that takes on Fremont’s seasonal moisture swing.
- Drawers that stick or slide out crooked. Worn glides or a bent slide rail. On KraftMaid full-access boxes, a single failed glide throws the drawer off-track because the box relies on two-point alignment.
- Loose or dropped shelf supports. Standard pin supports wallow out the drilled hole over time, especially in a cabinet holding canned goods or cast iron. A shelf clip rated for the load solves it; the old pin does not.
- Finish checking or peeling at the door edge. Fremont’s dry summers and damp winters stress painted and stained finishes at the joints first. Once moisture gets under the edge, the finish lifts.
- Cabinets that pull away from the wall. Anchor screws backing out of studs, or a cabinet hung on drywall alone. This one gets checked before anything else – a loaded upper coming off the wall is a real hazard.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Cabinet installation for a KraftMaid package in Fremont runs $4,000 – $13,000, and that’s the labor-and-install figure inside your larger addition or ADU budget. What drives the range: number of boxes, whether the layout is a straight run or an L with a corner, door style and finish (painted and glazed run higher than standard stain), and whether the room needs new blocking or a chase for the plumbing and electrical that a kitchenette or ADU bath demands.
| Line item | Fremont range |
|---|---|
| Cabinet installation (KraftMaid package) | $4,000 – $13,000 |
| Countertop installation (Cambria, Silestone options) | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Home addition (full project) | $45,000 – $130,000 |
| ADU construction (full project) | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
Every price change arrives as a written change order before work proceeds. An allowance that isn’t on paper is a surprise waiting for a date – we put it there. The labor carries the 90-Day Done Right Promise in writing, along with the manufacturer warranty on the cabinetry itself.
DIY or Call Us?
You can safely check a few things yourself: open and close every door and drawer, look for the spec sticker inside a box, measure the door overlay, and confirm the cabinet is still tight to the wall with a quick tug. What you shouldn’t do is rehang a loaded upper cabinet or re-drill a hinge bore on a finished door – a slipped cabinet or a blown door is far more expensive than the repair.
Where DIY goes wrong most often: mismatched hardware, stripped hinge holes, and a “close enough” glide that binds within a month. Our technicians have up to 28 years of experience matching KraftMaid parts to the right box. Call (833) 620-6162 to schedule a free estimate and let us look at the cabinet before you order anything.
FAQs

A well-installed KraftMaid cabinet package lasts 20 to 30 years with normal use. The box and door tend to outlast the hardware – hinges and glides are the first to go, usually somewhere in year 10 to 15. In Fremont’s dry-summer, damp-winter cycle, finish and door alignment are the wear points to watch.
Often yes. A single sagging door is usually a hinge or a pulled screw, and a sticking drawer is usually a glide – both repairable without replacing the box. We look at the part first and tell you honestly whether repair or replacement is the better call. Call (833) 620-6162 for a free estimate.
A hardware swap on one cabinet is a same-visit job; a full cabinet package install inside an addition or ADU runs several days depending on box count and layout. You’ll get the schedule in writing before work starts. Call (833) 620-6162 for an exact timeline.
We start with the spec sticker inside the box or careful measurements of width, depth, overlay, and hinge bore, then order the OEM part when it’s in production or a quality aftermarket equivalent when it isn’t. You’ll see exactly what’s being ordered, in writing, before we place it. Estimates are free when you call (833) 620-6162.
An addition or ADU is the biggest check most Fremont homeowners write, and the cabinetry inside it deserves a name you can look up. Tom Barrett publishes his name, his address, and his license number – check it before you sign anything. Our published standing offers include $40 Off Any Repair Over $200, a Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount. Call (833) 620-6162 for a free estimate and let’s get the scope on paper.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












