







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Home Additions & ADU: The Fremont Owner’s Guide
We install and repair Mr-Glass home additions and ADU systems throughout Fremont, and a typical installation runs $45,000 – $130,000 depending on size, foundation, and finish level. We’re an independent service provider, not affiliated with Mr-Glass, so we match your existing model to parts and assemblies by specification. Wait: this is a structural build, so it’s never a same-day job. A full addition takes weeks of permitting and framing before parts even enter the picture. Owners usually find a problem slowly: a sliding panel that drags in the Niles hillside soil, a wall-mounted ADU frame that sags after a wet winter, or a Mr-Glass glazed addition section where the seals fail and you notice water tracking down the interior face of the glass.

Which Mr-Glass Models This Applies To

Mr-Glass builds a range of modular addition and ADU systems, and the spec details shift across their series. The first step is always identifying what you actually own. Look for the data plate on the frame or the mounting plate, the model code stamped on any panel edge, and a measurement of the opening. Write all three down. Call us with that information in hand and we can tell you what fits. Without it, any “we have your part” answer is a guess.
The OEM-versus-aftermarket decision matters here more than on a window or a door sash. Mr-Glass replacement panels, seals, and frame hardware carry their exact tolerances. Aftermarket equivalents are real, and often fine for seals and trim, but they don’t always match the gasket profile or the corner bracket geometry. The honest rule: structural parts, buy OEM or buy a verified equivalent. Consumables like weather seals and trim, aftermarket can work. Don’t let anyone tell you differently without showing you the spec sheet.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Home Additions & ADU Is Failing
Owners read the problem in the building before they read the part number. Here’s what to look for.
- Water staining at the interior glass edge or seal line. The glazed panel seal has lost adhesion, usually after a Fremont summer-winter cycle. UV and heat push the sealant out; the winter rain finds the gap.
- A sliding or hinged panel that drags or won’t seat flush. The track has picked up grit or the roller and bracket hardware has worn. Left alone, it scores the track and forces a wider repair.
- Draft or heat loss at the addition-to-house joint. The junction where the Mr-Glass frame meets the existing house wall is the most common performance leak. The flashing and the seal both have to be right.
- Visible sag or deflection in an ADU frame. This points to a footing or support issue, not just a part. Fremont’s expansive clay soils shift seasonally, and a footing that was adequate in year one may not be by year five.
- Condensation or fogging between glazed layers. The sealed unit has failed. The glass itself may still be sound; the failed assembly is what needs replacing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a full Mr-Glass addition or ADU installation in Fremont, the installed price runs $45,000 – $130,000. What drives the range: overall square footage, foundation type, whether you’re using a garage conversion route ($30,000 – $80,000) or a ground-up build, glazing area, and finish level.
We price parts and labor as separate line items. You see what the Mr-Glass component costs and what the installation costs. No bundled mystery. We pull the permits and stand for the inspections, and every price change is a written change order before any work proceeds. All of it is backed by our 90-Day Done Right Promise, written on the contract. Call for an estimate; it’s free and it’s in writing.
DIY or Call Us?
You can safely do this: identify the model number, measure the opening, photograph the failed component, and check for water intrusion. That’s a smart homeowner doing his homework, and we’ll help you read what you find. Here’s where DIY goes wrong: structural work on an addition or an ADU, replacing glazed panels, and re-sealing a frame joint that’s part of the building envelope. That’s not a weekend job, and getting it wrong is expensive. This is a build, not a repair. Call us at (833) 620-6162 and let’s look at it together.
FAQs

How long does a Mr-Glass addition or ADU last in Fremont? A properly installed Mr-Glass addition or ADU system can last decades. The seals and glazed units are the wear points and typically need attention sooner than the frame. That’s the honest timeline.
Can the failed part be repaired instead of replaced? Often yes, if it’s a seal, weatherstrip, or hardware. If the glazed unit or a structural member has failed, replacement is usually the right call.
How long does the work take? A full addition or ADU is a weeks-long project, not a day. A component repair (seal, panel, hardware) is much shorter. We’ll tell you the real timeline at the estimate.
How do you source the Mr-Glass part? We match your model number and measurements to the manufacturer or a verified equivalent and show you what we’re ordering. You see the part and the spec before we commit.
Call (833) 620-6162 for a free estimate on your Mr-Glass home addition or ADU in Fremont. We also work with KraftMaid, Cambria, and Silestone when a project calls for them.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












