







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Driveway & Pavers: The Fremont Owner’s Guide
We install and repair PGT driveway and paver systems in Fremont, and a full paver driveway replacement here typically runs $7,000 – $18,000 installed, while spot repairs and re-sanding land far below that. We’re an independent service provider, not affiliated with PGT. Most Fremont owners find us the same way: a driveway that looked fine three winters ago now has pavers rocking underfoot, joints dumping sand into the storm drain, and a low corner where water pools against the garage slab after every February rain. That pooling is the tell. It means the base layer under the pavers has shifted, and no amount of new sand on top will fix what’s happening below.

Which PGT Models This Applies To

PGT’s driveway and paver lines are sold under specific series names and joint widths, and the part you need has to match both the paver profile and the joint specification of your original install. The fastest way to identify what you have is to pull one loose paver from an edge or a corner and measure it: length, width, thickness, and the joint gap. Thickness matters most. A paver that’s 2 3/8 inches thick and one that’s 2 3/4 inches thick look identical from standing height but don’t interchange in a driveway that takes vehicle loads. Check the underside too; most PGT pavers carry a stamp or mold mark on the bottom face, not the top.
On the OEM question, we’re straight with Fremont owners: matching original PGT pavers exactly is sometimes possible and sometimes not, depending on the series and dye lot. Dye lots shift over time even within the same product line, so a replacement run from a different batch can read slightly different in daylight. A quality aftermarket paver in the same thickness and a compatible joint width is often the better call for a repair, and we’ll tell you which route makes sense once we see the sample. For broader hardscape work, we also carry Belgard and Techo-Bloc, and across our other trades the same premium-brand approach applies with KraftMaid, Cambria, and Silestone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Driveway & Pavers Is Failing
- Pavers rocking or clicking underfoot. The bedding sand beneath has migrated or washed out, usually because the edge restraint has let go. Rocking pavers grind against each other and chip at the corners.
- Joint sand disappearing into the drains. Water is moving through the joints instead of across the surface, which points to a slope problem or failed base compaction, not just worn sand.
- Pooling at the garage apron or a low corner. Fremont’s clay-heavy soils swell in the wet season and settle in the dry one, and a base that wasn’t deep enough will show it as standing water within a few years.
- Rutting in the wheel paths. Two parallel depressions where the car parks mean the sub-base is too thin for the load or wasn’t compacted in lifts. This one never fixes itself.
- Efflorescence and joint weeds. White mineral haze that keeps returning after cleaning, plus weeds rooted in the joints, signals water sitting in the base rather than draining out of it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what driveway work runs in Fremont, parts and labor together, so you can price it against what you’re being quoted:
| Work | Installed Range |
|---|---|
| Paver driveway installation (full) | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
What drives the range on a paver driveway is excavation depth, base thickness, edge restraint type, and how much of the old surface has to come out and get hauled. A repair that lifts and resets a section sits at the low end; a full tear-out with a compacted aggregate base and new edge restraints sits at the high end. Every scope and allowance goes in writing before work starts, and any price change arrives as a written change order before we touch the job. Small repairs over $200 qualify for $40 off, there’s no trip charge inside the county, and the work carries our 90-Day Done Right Promise.

DIY or Call Us?
Some of this you can safely check yourself. Pull a loose paver and read the stamp, measure thickness and joint width, note where water pools after a rain, and take photos of any rutting. That’s useful information and it costs nothing. Where DIY goes wrong is the base. Lifting pavers, re-grading, and re-compacting a driveway base by hand almost never reaches the density a vehicle load needs, and a base that’s 90 percent right fails in two winters. This isn’t a dangerous job like a garage spring or a live electrical panel, but it is heavy, and a half-done base means paying twice. Background-checked crew members handle the compaction and edge work. Call (833) 620-6162 and we’ll look at it with you.
FAQs

How long do PGT pavers last in Fremont? A properly installed PGT paver driveway with a compacted base and working edge restraints should hold 25 to 30 years or more; the pavers themselves outlast the base, and the base is what fails first. Fremont’s wet-season clay movement is the main reason a shallow base gives out early. Call (833) 620-6162 for a free look at yours.
Can it be repaired instead of replaced? Often yes. If the failure is isolated to one section, a lifted edge, or worn joint sand, we can reset that area and re-sand the whole drive for a fraction of a full replacement. If the rutting runs the length of the wheel paths, the base is the problem and patching won’t hold. Call (833) 620-6162 and we’ll tell you which one you’re looking at.
How long does the swap take? A spot repair or re-sand is usually a one-day job. A full paver driveway replacement in Fremont typically runs three to five working days depending on square footage, excavation, and weather, and we’ll give you the schedule in writing. Call (833) 620-6162 to get your free estimate on the calendar.
How do you source the part? We measure your existing paver and match thickness, profile, and joint width against the PGT series, then check whether a current dye lot reads close enough to blend. If an exact PGT match isn’t available, we’ll show you a quality aftermarket equivalent side by side so you decide, not us. Call (833) 620-6162 for a free second opinion on any written estimate you’ve already got.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












