A Barrett company - serving Fremont, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
Schluter · Fremont

Schluter Home Additions & ADU in Fremont, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Fremont
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A new multi-panel patio door opening a kitchen to the patio
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Home Additions & ADU: The Fremont Owner’s Guide

We build and finish home additions and ADUs in Fremont using Schluter systems for the waterproofing and tile assemblies, with typical additions running $45,000 – $130,000 depending on size, foundation, and how much of the wet area gets tiled. This is planned construction, so nothing happens same-day; what we do give you is a written scope, a written allowance schedule, and a firm sequence before the first form board goes down.

Two contractors installing wooden upper kitchen cabinets during a home remodel. in Fremont, CA

Call (833) 620-6162

Owners usually discover a Schluter problem the slow way. A shower floor in a new addition starts feeling soft at one corner. Grout along the linear drain turns dark and won’t come clean. A hairline crack walks across the shower bench after two winters. Nine times out of ten the conversation starts the same way: “The tile looks fine, but something’s wet behind it.” That’s a waterproofing failure, not a tile failure, and on an addition it’s expensive because the fix reaches back into the framing and the inspection sequence.

Which Schluter Models This Applies To

A tile setter installing wall tile in a shower

The two assemblies we deal with most in Fremont additions are Schluter KERDI-BOARD panels (the foam tile backer used for shower walls and benches) and the KERDI-LINE linear drain system, along with DITRA-HEAT for heated floors in ADU bathrooms. KERDI-BOARD comes in thicknesses from 1/2 inch to 2 inch; the 1/2 inch is standard for walls over framing, and 2 inch is what we use to build a bench or a niche without framing it out. Getting the thickness wrong is the most common compatibility mistake we see. A 1/2 inch panel where the plan called for 2 inch throws off every fixture rough-in downstream, and by then the plumber’s already gone.

On the drain side, KERDI-LINE is a bonded waterproofing linear drain that has to be set into the same continuous membrane as the floor. It is not a drop-in replacement for a standard clamping drain, and the flange geometry has to match the shower’s subfloor prep. If your model number is on a sticker inside the drain body or on the KERDI-BOARD edge print, read it before you order anything. OEM Schluter components and quality equivalents differ mainly in the fleece bonding and the certified thickness tolerance, and on a project that has to pass a Fremont inspection, we stay with the OEM part. We don’t stock parts and nothing rides on a truck; we source what the job needs, matched to the model.

Barrett & Sons Construction Fremont is an independent contractor. We’re not affiliated with Schluter.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Home Additions & ADU Is Failing

  • Grout that darkens and won’t dry. Moisture is wicking through a compromised seam rather than staying on top of the membrane. The joint at the floor-to-wall transition and the drain flange are the first places to check.
  • A soft or hollow-sounding shower floor. That hollow note means the membrane has lost bond to the substrate. On an addition over a slab or a framed floor, it usually traces back to prep, not product.
  • Efflorescence or white crust on the tile or grout. Salt deposits mean water is moving through the assembly and evaporating at the surface. In Fremont’s dry summers it can stay hidden for months and then show hard in January.
  • Cracked tile along a bench or curb. Movement, not grout wear. A bench built from KERDI-BOARD that wasn’t fully bonded and banded will flex just enough to crack a tile over a couple of seasons.
  • Water staining on the ceiling or wall below the addition’s bathroom. This is the one that stops being a tile problem and becomes a framing and drywall problem. It means the membrane has been failing quietly for a while.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A new paver pool deck

Repairing or rebuilding a failed Schluter wet assembly inside a Fremont addition typically runs with the scope, not as a flat part swap. A localized shower floor redo with new membrane and drain sits in the lower range; a full wet-area rebuild with new KERDI-BOARD, waterproofing, and tile runs several times that. For pricing context, additions as a whole are $45,000 – $130,000 in Fremont, a bathroom remodel inside one runs $9,000 – $28,000, a walk-in shower install $4,500 – $12,000, and a tub-to-shower conversion $3,500 – $10,000.

What drives the number up: whether the bench has to come out, whether the drain is set in a slab, and whether the framing behind the board is wet. Parts-plus-labor is quoted line by line, so you see the membrane, the drain, the board, and the labor as separate lines instead of one lump. Every job that’s eligible gets permits pulled and inspections signed. Every completed job carries our 90-Day Done Right Promise, written on the contract.

DIY or Call Us?

You can safely check a few things yourself. Look for the model print on the KERDI-BOARD edge or the sticker inside the drain body, press a dry paper towel into the corners of a shower floor and see if it wicks, and note whether the grout discoloration is at the drain flange or the wall transition. That tells you which assembly is likely failing and helps when you call.

What we don’t recommend is tearing into a wet assembly to check for yourself. KERDI-BOARD is a bonded system; once you cut it, you’re committing to a rebuild of the whole waterproofed area, not just the panel you pulled. There’s also a plumbing and permit layer here that most homeowners underestimate, and an inspector is going to look at the repair. If you’ve already got a soft floor or a stain below, call us at (833) 620-6162 and we’ll take a look before you open anything up.

FAQs

An open kitchen and dining area after a remodel

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new bay window with a cushioned seatA new wood side gate with black hardwareA new concrete driveway with a paver borderA stone counter, tile backsplash and open shelf after a kitchen remodelA garage converted into a guest room and home officeNew architectural shingles with a clean valley

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Barrett in Fremont

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Fremont team

A local vetted partner works across Fremont and the towns around it, to the same written standard as every Barrett job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 620-6162
Local Service Coverage

Request a Free Estimate in Fremont

Tell us what you need - Barrett & Sons Construction Fremont responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch