A Barrett company - serving Fremont, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Schluter · Fremont

Schluter Kitchen Remodeling in Fremont, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Fremont
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
A new multi-panel patio door opening a kitchen to the patio
A new stained cedar privacy fence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Kitchen Remodeling: The Fremont Owner’s Guide

Schluter kitchen remodeling in Fremont runs $14,000 – $45,000 for a full kitchen, and the waterproofing and edge-trim layer that Schluter systems provide is where most of the hidden cost sits. We install Schluter-compatible kitchen work across Fremont – Kerdi-Board backer, Ditra underlayment under tile, and Schluter edge profiles on the exposed tile and stone edges – backed by the written 90-Day Done Right Promise. Price changes come to you as written change orders before work starts, and we pull the permits.

Two construction workers installing stone pavers for a residential driveway project. in Fremont, CA

Call (833) 620-6162

Owners usually find the problem underfoot or at the waterline. A backsplash tile pops loose and takes a soft, crumbly patch of thinset with it. The grout around a sink or a cooktop goes dark and stays dark. A grout line at the base of the tile cracks in a straight run, which almost always means the substrate moved and the uncoupling membrane under it either failed at a seam or wasn’t there in the first place. In Fremont we see this a lot in kitchens finished during the last remodel cycle, where a tile set was laid over plywood with no decoupling layer and a decade of seasonal movement did the rest.

Which Schluter Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Schluter spreads across several product lines, and knowing which one is on your kitchen matters before anyone quotes a repair. The main ones you’ll run into in a Fremont kitchen:

  • Schluter-DITRA and DITRA-XL – the uncoupling membrane that goes under floor tile. The original DITRA is 1/8 inch thick; DITRA-XL is 5/16 inch. Getting the height wrong throws off the transition at a doorway or a cabinet toe kick.
  • Schluter-KERDI and KERDI-BOARD – waterproofing for wet zones like a sink wall or a window backsplash. KERDI-BAND is the seam tape that has to overlap the membrane by at least 2 inches.
  • Schluter-RENO-U, RENO-TK, and JOLLY – the edge profiles on exposed tile and stone edges. RENO-U handles a floor-to-floor transition; JOLLY is the slim trim for a wall tile edge.
  • Schluter-SHOWERPROFILE and KERDI-LINE – less common in kitchens, but you’ll see them where a kitchen ties into a wet bar or a lunch-counter tile run.

To identify yours, drop the ceiling on the brand printed on the roll edge (DITRA and KERDI both carry a printed logo and a part number along the fleece), measure the membrane thickness with a caliper, and note whether the profile is anodized aluminum or a PVC composite – the trim is sold by depth and by finish, and a mismatch on either shows. On the OEM-versus-aftermarket question, Schluter’s own literature is clear that its system warranties depend on using its components together, so substituting a generic uncoupling mat or a no-name edge profile voids the claim. That matters in a kitchen, where a failed membrane doesn’t announce itself for years. For the cabinets and countertops we set on top of this layer, we work with KraftMaid, Cambria, and Silestone – brands you can look up rather than mystery labels off a van. Barrett & Sons Construction Fremont is an independent service provider and is not affiliated with Schluter.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Kitchen Remodeling Is Failing

  • Hollow-sounding tile underfoot. Tap with a screwdriver handle and listen for a dull thud instead of a crisp tap. That usually means the thinset never bonded to the membrane, and the tile is rocking on a void.
  • A straight crack running along a grout line. Cracks that run in a clean line rather than spider-webbing point to a seam in the DITRA that wasn’t overlapped correctly, so the two sheets moved independently.
  • Dark, damp grout around the sink or under the dishwasher. KERDI leaks at the seam tape, not at the sheet. If the grout goes dark and stays dark after a wipe-down, water is getting behind the tile and the banding hasn’t held.
  • Lippage that appears over a season. A tile edge that used to sit flush with its neighbor and now catches your sock is the membrane telegraphing subfloor movement it should have isolated.
  • Caulk cracks where the tile meets a cabinet or toe kick. This is the joint taking the flex the substrate didn’t absorb. Left alone, that same movement reaches the tile and pops a bond.

None of these are cosmetic. Each one is the layer under the tile telling you where the water or the movement is coming from.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A new front yard fence with a matching gate

A kitchen remodeling job in Fremont lands at $14,000 – $45,000, and that range is driven by three things: how much tile and stone you’re covering, whether the subfloor has to come out to replace a failed membrane, and whether the cabinets and countertop are being replaced while the floor is open. If you’re replacing the tile set only, a small kitchen sits at $9,000 – $20,000; a backsplash rebuilt with a fresh KERDI layer and a new edge profile is $800 – $2,500. A countertop install is $2,000 – $6,500, cabinet installation $4,000 – $13,000, and a kitchen island runs $3,000 – $10,000.

Here’s what we do on parts and labor: we quote the membrane, banding, profile, mortar, and setting material as line items, and we quote the labor as a separate line, so you see what you’re paying for the Schluter components versus the work to install them. If the demolition reveals that the membrane failed because the subfloor was out of flat by more than 1/8 inch in 10 feet – the Schluter spec for that product – that’s a scope change and it arrives on a written change order before a nail moves. Every job is backed by the 90-Day Done Right Promise; if it isn’t right, Tom comes back on one call.

DIY or Call Us?

An owner can safely check a few things. Tap across the tile for hollow spots, look at the grout lines at the sink and around the base of the cabinets, and run a level across the tile to see if the surface is flat. That’s information gathering, not repair.

Installing the membrane and tile isn’t a “while you’re at it” job, and it’s not a case of a product being too dangerous so much as a tolerance problem. DITRA has to be laid over a subfloor that meets the flatness spec, set with a thin-set mixed to the right consistency, and the seams have to be clean and the mortar still wet enough to bond. A membrane that looks installed can be sitting there doing almost nothing until it fails a year later, and by then the tile above it is a wreck. If your backsplash is coming apart at a seam, or you’re seeing a straight crack along a grout joint, that’s not the place to learn. Call us at (833) 620-6162 and we’ll tell you on the phone whether it’s a tile-only repair or the whole layer needs to come up – and if you want a second opinion on a written estimate someone else gave you, that’s free.

FAQs

A new paver pool deck

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new bay window with a cushioned seatA new wood side gate with black hardwareA new concrete driveway with a paver borderA remodeled hall bathroom with subway tile and a floating vanityA remodeled primary bathroom with a soaking tub and walk-in showerA single-story rear room addition with tall windows and a new patio

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Barrett in Fremont

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Fremont team

A local vetted partner works across Fremont and the towns around it, to the same written standard as every Barrett job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 620-6162
Local Service Coverage

Request a Free Estimate in Fremont

Tell us what you need - Barrett & Sons Construction Fremont responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch