







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Driveway & Pavers: The Fremont Owner’s Guide
We install Sterling paver driveways and hardscape in Fremont, and most paver driveway projects here land between $7,000 and $18,000 installed, depending on square footage, base prep, and edge restraints. A paver driveway isn’t a single part you swap like a hinge; it’s a system of surface pavers, a compacted base, sand-set joints, and edge restraint, and “failure” almost always traces back to one of those layers. In Fremont, owners usually discover the problem after a wet winter: sunken paver bands near the garage apron, sand washing out of the joints, a lip where the driveway meets the sidewalk, or a couple of pavers cracking under the family SUV. What follows is what we check, what it costs to make right, and how to tell a real fix from a skim coat of sand over a bigger problem.

Which Sterling Models This Applies To
Sterling pavers come in several product lines, and the differences that matter to a Fremont driveway are thickness, face style, and color run. A standard 2 3/8-inch (60mm) paver handles a residential driveway; thinner 1 3/4-inch product is patio-grade and will flex and crack under vehicle load, so if you’re replacing pavers on a slope or over an existing base, verify the thickness stamped or specified on your original job paperwork before you order a match. Newer Sterling lines have a tumbled or cleft face while older runs are smoother, and dye lots shift between runs, so a patch ordered today may read a shade off from what’s already on the ground. How to identify the right product: measure a paver’s length, width, and thickness, photograph the face texture and the color against daylight, and note the joint width. On the OEM-vs-aftermarket call for Sterling specifically, a matching aftermarket concrete paver in the right thickness and a close face texture often performs identically and blends better than chasing a discontinued color. We’re upfront that we’re an independent installer, not affiliated with Sterling, so we’ll tell you when the brand match matters and when it doesn’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Driveway & Pavers Is Failing
- Sand washing out of the joints after rain. The joint sand is the first thing to go when the base wasn’t compacted in lifts, and Fremont’s clay-heavy soil holds moisture that pushes it out. Re-sanding buys time but won’t fix a soft base.
- Sunken or uneven pavers near the garage and street. This is almost always base settlement, not a bad paver. It shows up where drainage concentrates and where the driveway meets the apron, which is exactly where cars sit and load-bearing is highest.
- Weeds sprouting in the joints. Persistent weeds signal missing or depleted polymeric joint sand, plus organics trapped in the open gaps. It’s a look problem today and a stabilization problem by next season.
- Cracked or chipped pavers under vehicle weight. Thin patio-grade product, point loads from jacks or trailers, or pavers bedded on an uneven base all cause this. A single crack is a repair; a pattern of cracking across a wheel track points to the base.
- Ponding water or a lip at the transition. Poor slope away from the house and edge restraint that’s pulling loose. Drainage that pools against the foundation is the one item on this list worth fixing before the next rainy season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Fremont homeowners actually pay for hardscape work, in the ranges we quote:
| Service | Installed Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Asphalt Driveway Paving | $3,500 – $9,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Sealing | $250 – $700 |
What drives the range: square footage, whether the old surface has to be broken out and hauled, how deep the base has to go to reach stable soil, edge restraint and drainage corrections, and paver selection. We break parts and labor out line by line, so you see the paver cost, base material, and labor separately, and every price change arrives as a written change order before we touch the job. All eligible jobs get permits pulled and inspections signed, and every completed project is backed by our 90-Day Done Right Promise in writing.
DIY or Call Us?
You can safely check a few things yourself: hose the driveway and watch where water runs, lift a loose edge paver to see whether the base underneath is firm or mushy, and measure a paver’s thickness to confirm whether your original product was driveway-grade. Where this goes wrong for a homeowner: re-sanding joints over a settled base, spot-gluing cracked pavers, or patching a section without matching the thickness and compaction, all of which hide the real problem for a few months and then fail worse. Pulling up a full paver field, re-compacting base in the right lifts, and resetting edge restraint is heavy, exacting work, and a half-finished driveway sitting open through a rainy stretch makes everything underneath worse. If your driveway is ponding toward the house or sinking in a wheel track, that’s the point to call. We’ll give you a free second opinion on any written estimate you’ve got, and we don’t charge a trip fee inside the county. Call (833) 620-6162 and we’ll talk through what you’re seeing.

FAQs

How long should a Sterling paver driveway last in Fremont? A properly installed paver driveway with a well-compacted base should hold 25 to 30 years or more, but in Fremont’s clay soils the base decides that lifespan far more than the paver brand does. If your driveway is sinking and shedding sand within 10 years, the base prep is the suspect, not the surface product.
Can the pavers be repaired instead of replaced? Often yes. Lifting and resetting a sunken section, re-sanding joints, and re-securing edge restraint can restore a driveway for a fraction of full replacement when the pavers themselves are sound and the base problem is localized. If cracking runs in a wheel track across a wide area, replacement of that section is usually the honest answer. Call (833) 620-6162 for an exact quote, and estimates are free.
How long does the swap take? A localized repair takes a day or two. A full paver driveway install on a typical Fremont property runs about three to seven working days, weather permitting, including tear-out, base prep, compaction, and setting. We’ll put the schedule in writing before we start.
How do you source the part? We match your existing paver on thickness, face style, and color run, then order through our supplier network and tell you plainly when a close aftermarket match is the smarter buy than chasing a discontinued Sterling color. No mystery brands off a van: we also install KraftMaid, Cambria, and Silestone on the interior side of our work, and we name every product we put in.
If your Sterling driveway is shedding sand, sinking at the apron, or cracking under the car, the fix starts with an honest look at the base. We’ll walk the driveway with you, put scope and pricing in writing, pull the permits, and stand behind the work with our 90-Day Done Right Promise. Call (833) 620-6162 for a free estimate, and take $40 off any repair over $200 or your permanent 10% senior and veteran discount where it applies.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












