







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Home Additions & ADU: The Fremont Owner’s Guide
We build and install Therma-Tru-compatible home additions and ADUs for Fremont homeowners, with projects typically landing between $45,000 and $130,000 installed depending on square footage, foundation, and finish level. ADU construction runs higher, from $90,000 to $220,000. Most owners discover a door, threshold, or sidelite problem during the design walkthrough or after a winter of sticking and leaking, not before. If a door at the addition’s entry has started dragging, fogging, or letting water past the sill, that’s usually the first repair inside the bigger build. Call (833) 620-6162 for a free estimate.

Key Takeaways
- Therma-Tru entry doors are common on Fremont additions and ADUs built from the late 1990s onward.
- Sill pans and thresholds fail before the door slab does, especially on north- and west-facing walls.
- Fiberglass and steel skins hold up well here; seals and hinges do not.
- Get a written, line-item scope before any addition work begins. Change orders belong on paper.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Which Therma-Tru Models This Applies To
Therma-Tru makes doors, not additions, so “this applies to” means the entry doors, patio doors, and sidelites that go on your addition or ADU. The key is identifying the right part before you order anything. Therma-Tru labels its slabs and frames with a model number on the hinge jamb or the top of the slab edge, and the glass unit has its own I.G. label with a manufacturer date. Write both down. Fiber-Classic and Smooth-Star are the two lines you’ll see most on Fremont homes, and the difference matters: Fiber-Classic uses a grain-textured fiberglass skin with tighter tolerances on the stile, while Smooth-Star is a flat, paintable surface with a wider door-edge profile.
Measure the rough opening at the frame, not the slab, and check whether the door is a right- or left-hand inswing. A left-hand door reordered as a right-hand door will not fit the existing opening without reframing, and that’s the most common ordering mistake we see. On the OEM-versus-aftermarket call, Therma-Tru-branded hinges, sills, and weatherstrip are worth it for the first few years because the tolerance match is exact. Aftermarket sills and sweeps from a quality manufacturer are fine on older doors, provided the width and drip cap line up.
We’re an independent service provider and are not affiliated with Therma-Tru. We don’t stock parts or carry them on a truck. Anything we install we source to your model number, and that means a written record of exactly what we ordered.
Signs Your Therma-Tru Home Additions & ADU Is Failing
On an addition or ADU, the entry door is the first thing that shows failure because it sits in a wall that’s exposed to weather on more sides than the main house. Here’s what to watch for:
- The door drags on the threshold in summer, sticks in winter. This is usually a sagging hinge or swollen wood frame member, not a bent slab. Look at the gap along the top of the door.
- Water stains or soft wood at the interior sill. The sill pan is letting water past the threshold. On Fremont additions, a west-facing door with a flat or low-slope porch roof is the usual culprit.
- Fogging or condensation between the glass panes. The insulated glass seal has failed. Replacement glass or a new door unit is the fix, not a surface treatment.
- Daylight visible around the closed door or a whistling draft. Weatherstrip and sweep are worn or compressed, often after 8 to 12 years on this climate’s sun and dry-season dust.
- The finish peeling or blistering on the door face. A fiberglass or steel door with a failed topcoat will take in moisture at the edges. That leads to delamination, which is the point where repair stops and replacement starts.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
On a Fremont addition or ADU, the door replacement usually gets folded into the larger build scope rather than priced alone. That said, the numbers you should expect to see on a written estimate look like this:
- Home Addition (full scope): $45,000 – $130,000
- ADU Construction: $90,000 – $220,000
- Garage Conversion: $30,000 – $80,000
- Door replacement or repair within scope: priced as a line item, typically a few hundred to a couple thousand dollars depending on whether the slab, the frame, or both are involved.
What drives the range: square footage, foundation type (slab versus raised), whether the addition needs a new electrical or plumbing run, and the finish package. Every scope, every allowance, and every price change arrives as a written change order before work happens. The permit inspector works for you, not us, and we pull the permits on every eligible job. Work is backed by the written 90-Day Done Right Promise. Our technicians have up to 28 years of experience, and we also install and service KraftMaid, Cambria, and Silestone when a kitchen or bath sits inside the addition.
DIY or Call Us?

You can safely check a few things yourself: wipe down the weatherstrip, look at the hinge screws for stripping, check the threshold for water staining, and note the door model number from the jamb label. Write it down. That’s the single most useful thing you can hand a contractor.
What you shouldn’t tackle is removing the door unit from a finished opening, reframing a rough opening, or resetting a sill pan on an addition wall. The door is part of the water barrier. If it goes back in wrong, the leak shows up in the wall cavity a season later, and by then the framing is soft. On an exterior wall of a heated addition, this is a moisture problem first and a carpentry problem second. If you’re not sure whether the failure is the door or the wall behind it, call us and we’ll tell you honestly. Call (833) 620-6162 to schedule a free estimate.
FAQs
A Fiber-Classic or Smooth-Star door slab typically lasts 20 to 30 years in Fremont conditions. The parts around it don’t: weatherstrip and sweeps generally need attention at 8 to 12 years, and sill pans are the first waterproofing component to fail. North-facing doors last longer than west-facing ones because the sun load is lower and the finish holds up better.
Yes, in most cases, as long as the slab itself isn’t delaminated. Hinge replacement, weatherstrip, sweep, sill, and threshold repair are all fixable on the original door. Fogged glass can be swapped if the door line stocks a replacement glass unit. The line between repair and replace is slab integrity. If the skin is bubbling or peeling at the stile, replace it. Call (833) 620-6162 for an exact quote and we’ll tell you which side of the line yours is on.
A single entry door replacement runs one full day for the swap and another half day for trim and touch-up if the opening needs to be rebuilt. On an active addition or ADU build, the door goes in as part of the framing and finish schedule. The timing depends on the permit inspection sequence and material lead time, and we put both in writing before work starts.
We order to your model number from the jamb label or the glass unit label, and we confirm the swing direction and rough-opening dimensions before placing the order. We don’t stock parts or carry them on a truck. Every part we order shows up on a written line item with the manufacturer, part number, and price. If the part number on your door doesn’t match what the label says it should, we’ll tell you that before we order. Call (833) 620-6162 for a free estimate.
Standing offers: $40 Off Any Repair Over $200. Free Second Opinion on Any Written Estimate. No Trip Charge Inside the County. Permanent 10% Senior & Veteran discount.
Calls are answered by a live person, 24/7. Tom Barrett publishes his name, address, and license number. Look it up before you sign anything. Barrett & Sons Construction was founded in 1998 and is owner-operated, and every eligible job gets permits pulled and inspections signed.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












