







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Bathroom Remodeling: The Fremont Owner’s Guide
Toto bathroom remodeling in Fremont typically runs $9,000 to $28,000 installed, depending on whether you’re refreshing a hall bath or rebuilding a primary suite around a Toto toilet and washlet. Because Toto fixtures are engineered to tight tolerances, most projects need planning around model-specific parts and rough-in dimensions rather than a quick drop-in swap. Fremont owners usually discover a problem the same way: the fill valve starts hissing at 2 a.m., a washlet sprays cold, or a supply line seeps onto the tile and the toilet wobbles when they finally notice.

Key Takeaways
- Fremont bathroom remodels with Toto fixtures run $9,000 – $28,000 installed.
- Toto parts are model-specific – the serial number under the tank lid is the key.
- We’re an independent contractor and not affiliated with Toto; we source genuine OEM parts for your model.
- Permits pulled and inspections signed on every eligible job.
Which Toto Models This Applies To

Toto’s lineup splits into distinct families, and the part that fits one rarely fits another. The Drake and Eco Drake (CST743, CST744) use the widely available TSU28A fill valve and a 3-inch flapper, while the Ultramax II and Carlyle lines sit on the same 1.28 gpf platform but with different tank-to-bowl gaskets. Washlet seats – the S, C, and E series plus the integrated Neorest – use their own supply fittings and control boards. Before we order anything, we pull the model and serial sticker inside the tank lid or behind the seat. That sticker is the only reliable identifier; a photo of the toilet bowl tells us almost nothing.
For Toto specifically, the OEM-vs-aftermarket decision matters more than it does for generic brands. Genuine Toto fill valves and flappers are calibrated to the exact refill ratio the bowl needs, and a $6 universal flapper often causes weak flushes or ghost-flushing. We use genuine OEM parts on Toto toilets unless a homeowner asks otherwise, and we’ll tell you when a quality aftermarket equivalent is truly fine. KraftMaid, Cambria, and Silestone handle the cabinets and counters on the same job if your Fremont remodel goes wider than the toilet.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Toto Bathroom Remodeling Is Failing
- Hissing or running after the flush. The fill valve is worn or the flapper isn’t seating – a $15 part wasting hundreds of gallons a year.
- Ghost flushing in the middle of the night. A slow flapper leak drops the tank level and triggers a refill cycle. Common on 10+ year-old Toto flappers.
- Wobbling toilet or soft floor around the base. A failed wax ring or supply line has been seeping. In Fremont’s older slab and pier-and-beam homes, that moisture can reach the subfloor fast.
- Washlet spraying cold or not at all. The seat’s inlet filter is clogged or the control board has failed – a model-specific part, not a universal one.
- Cracks at the tank bolts or bowl rim. Porcelain fatigue after years of expansion. Once a tank or bowl cracks, replacement is the only safe fix.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Fremont, a full Toto bathroom remodel runs $9,000 – $28,000. The range is driven by scope: tile and waterproofing on a walk-in shower ($4,500 – $12,000), a tub-to-shower conversion ($3,500 – $10,000), a vanity install ($800 – $3,000), and fixture replacement. A small bathroom remodel lands $5,000 – $12,000.
Parts and labor are quoted as separate line items, so you see exactly what the Toto part costs versus the install. Every price change arrives as a written change order before work starts. Every eligible job is permitted and inspected, and the work is backed by the 90-Day Done Right Promise. Call (833) 620-6162 for a free estimate.
DIY or Call Us?
You can safely handle the small stuff: shut the supply valve, remove the tank lid, snap a photo of the model sticker, and check that the flapper chain isn’t tangled. That’s the limit. Replacing a fill valve or flapper looks simple until a cross-threaded plastic nut cracks a tank or a supply line lets go and floods the floor. Washlet control boards and electrical connections are the wrong place to learn – a wrong wire or a bad seal is a costly mistake. When the toilet wobbles, the floor feels soft, or water’s showing up where it shouldn’t, that’s a job for us. Call (833) 620-6162 for a free estimate.
FAQs

A Toto fill valve and flapper typically last 5 – 10 years; washlet control boards often reach 8 – 12 years. Hard water and constant use shorten that. Call (833) 620-6162 for a free estimate on replacement.
Sometimes. A flapper, fill valve, or washlet inlet filter can be swapped without touching the toilet itself, which is far cheaper than a full replacement. A cracked tank or bowl can’t be repaired safely. Call (833) 620-6162 and we’ll tell you which it is.
A fill valve or flapper swap is a short service call, usually under an hour. A washlet board or a full toilet replacement takes longer, and anything involving the floor or subfloor becomes a scheduled remodel. Call (833) 620-6162 for a free estimate.
We match the model and serial number on your tank lid to genuine OEM parts and order the correct one. We don’t claim to stock parts – we source the right one for your model, which is why the sticker photo matters. Call (833) 620-6162 to get started.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












