







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Driveway & Pavers: The Fremont Owner’s Guide
We install and repair Unilock driveways and paver systems across Fremont, and a full paver driveway typically runs $7,000 to $18,000 installed, with patio work at $3,500 to $11,000. We’re an independent contractor, not affiliated with Unilock, so we’ll tell you straight whether your failing section needs a full tear-out or a targeted reset. Fremont owners usually find out something’s wrong the same way: a paver lifts an eighth of an inch after a wet January, the car tire clicks over it every morning, and by spring the joint sand is gone and water is pooling against the garage slab instead of running to the street.

That sinking, rocking, or lipping paver is rarely the block’s fault. In our experience across Fremont, it’s almost always the base underneath – or the joint sand that washed out during the rainy season.
Key Takeaways
- Unilock pavers are a system: the block, the polymeric joint sand, and the compacted base all fail or hold together.
- Installed paver driveways in Fremont run $7,000 to $18,000; patios $3,500 to $11,000.
- Most “broken paver” calls turn out to be base settlement or lost joint sand, not a bad block.
- Matching a replacement paver to your exact Unilock line is the step most homeowners get wrong.
- Spring is when Fremont’s clay-heavy soil shows its cards – winter rain, then dry-out, then movement.
Which Unilock Models This Applies To
Unilock makes a lot of paver lines, and they don’t interchange. The structural pavers you’ll see on a Fremont driveway – Brussels Block, Beacon Hill, Thornbury, Tribeca, and the EverLoc retaining systems – each have their own thickness, face dimensions, and edge profile. Beacon Hill and Brussels have a tumbled, antiqued look; Tribeca is a smoother, more modern face. If you’re replacing a cracked or missing block, the match has to account for both the line and the color blend, because Unilock runs color series like Sierra, Granite, and Charcoal within each line. Pull a loose paver and check the bottom for a stamped code, or measure it: many Unilock driveway pavers run 2 3/8 to 2 3/4 inches thick, and face sizes vary by pattern (some sold in three-piece random bundles). The OEM-vs-aftermarket call matters here. A generic 60mm paver from a box store will sit at a different height than your Unilock field, which means a trip hazard and a joint that won’t lock. Where a true match isn’t available, a quality aftermarket paver of the same thickness and a close color is a reasonable substitute for a small repair – but tell your installer you want the height matched, not just the color.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Driveway & Pavers Is Failing
- Pavers rocking or lipping underfoot. This is base settlement. Water got under the surface, the compacted aggregate shifted, and the block lost its bed – common where a Fremont driveway drains toward the house instead of the street.
- Joint sand washing out. The polymeric sand between pavers erodes over a few wet seasons. Once the joints open, water runs straight into the base and the whole surface starts to move.
- Weeds and moss in the seams. Open joints let seed and moisture in. Moss on a shaded north-facing Fremont driveway usually means the sand is gone and the surface is staying damp.
- Cracked or chipped blocks. Often a single paver taking a point load – a car jack, a dropped trailer tongue, a heavy delivery. One bad block can be swapped without touching the rest.
- Pooling water and settlement near the garage or street. Low spots at the apron or gutter tell you the base has lost grade. Left alone, that water works its way to the foundation.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what paver work runs in Fremont, installed, with materials and labor together:
- Paver driveway installation (full): $7,000 – $18,000
- Paver patio installation: $3,500 – $11,000
- Driveway replacement (tear-out and rebuild): $5,000 – $14,000
- Targeted repair (reset or replace a section): quoted per job after we see the base
What drives the range: square footage, whether the old surface and base come out, how much base has to be re-compacted, the Unilock line and color you pick, and drainage corrections like a channel drain or re-grading. Our quotes are line-item and written – you see the block cost, the base work, and the labor separately, with no allowance surprises once we start. Every completed job is backed by our written 90-Day Done Right Promise. If something isn’t right, one call brings us back.

DIY or Call Us?
You can safely do a few things yourself: walk the driveway and note which pavers rock, check the joints for missing sand, and confirm where water pools after rain. That information helps us quote accurately. Where DIY goes wrong is in the base. Pulling a paver and dropping a new one in without re-compacting and re-sanding the bed looks fixed for a month, then the block settles again and takes its neighbors with it. A paver driveway is a system, and skipping the base is how a small repair turns into a full replacement. If a section is heaving or the base is clearly moving, it’s a job for someone who’ll do the base work, not just set a stone. Call (833) 620-6162 and we’ll come out, look at the base honestly, and tell you whether you need a repair or a rebuild – the estimate is free.
FAQs

How long should Unilock pavers last on a Fremont driveway? A properly installed Unilock paver driveway should last 25 to 30 years or more. The block itself holds up well; what fails first is the joint sand and the base, especially in Fremont’s clay soil that swells in winter and shrinks in summer. Keeping joints filled and drainage working is what gets you to the top of that range. Call (833) 620-6162 for an exact quote – estimates are free.
Can a failing paver be repaired instead of replaced? Yes, in most cases a single rocking or cracked paver or a small settled section can be pulled, the base re-compacted, and the block reset or replaced. A full replacement is only needed when the base has failed across a large area or the grade no longer drains. We’ll tell you which one you actually need. Call (833) 620-6162 for a free estimate.
How long does it take to swap out a damaged paver? A small repair of a paver or two is typically done in a single visit. A larger section reset or a partial rebuild runs a day or more depending on base work and drying time for the joint sand. We’ll give you a written timeline before we start. Call (833) 620-6162 to schedule your free estimate.
How do you match the replacement part to my Unilock pavers? We identify your Unilock line from the block’s stamped code or its measured thickness and face size, then match the color series. Where an exact match isn’t available, we source a same-thickness quality paver and get the height right so the joints still lock. We also install Belgard and Techo-Bloc hardscapes, and handle KraftMaid, Cambria, and Silestone on interior work. Call (833) 620-6162 for a free estimate.
When your Unilock driveway in Fremont starts rocking or losing its joints, the fix is usually smaller than it looks – but it depends on getting the base right. Call Barrett & Sons Construction Fremont at (833) 620-6162 for a free, line-item estimate. We’ll look at the base, tell you the truth about repair versus rebuild, and put the scope in writing before any work starts.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












