







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Driveway & Pavers: The Fremont Owner’s Guide
We install Wellborn driveway and paver systems for Fremont homeowners, and most complete paver driveways land between $7,000 and $18,000 installed, depending on square footage, base prep, and paver line. We source Wellborn-compatible materials to match your existing run, and we schedule the work as soon as the site is ready. If a section has heaved, a border has shifted, or pavers are settling unevenly after a winter of rain, you’re in the right place to get it priced honestly and fixed right.

Most owners don’t wake up thinking about their driveway. They notice something smaller first: a paver that rocks when the car pulls in, a joint that won’t hold sand anymore, or a low spot that puddles after every storm. In Fremont, that puddling shows up fast because our clay-heavy soils under the Mission Hills and Niles foothills don’t drain like the sandy ground a lot of national paver guides assume. That’s usually the moment a homeowner starts searching for the part, the fix, and someone local who can stand behind it.
Key Takeaways
- Paver driveway installation in Fremont typically runs $7,000 to $18,000 installed.
- Wellborn pavers are matched by profile, thickness, and color, not by model year.
- Base failure, not the paver itself, causes most of what looks like “broken pavers.”
- We pull permits and sign inspections on every eligible Fremont job.
- Our crew members have up to 28 years of experience with hardscape installs.
One note up front: Barrett & Sons Construction Fremont is an independent contractor. We are not affiliated with Wellborn. We install and repair Wellborn-compatible driveway and paver systems and source materials that match your existing install, and we tell you plainly when a match isn’t possible.
Which Wellborn Models This Applies To

Wellborn pavers aren’t sold the way a car part is, tied to a model year and a VIN. They’re matched by physical spec: paver profile (the shape of the top and edge), nominal thickness, and color series. So the “part number” you need is really a set of measurements. Get these right and the match is clean. Get them wrong and you’ll be looking at a repair that never quite lines up.
Here’s how to identify what you have before you call anyone:
- Measure thickness at the exposed edge. Most driveway pavers are 60mm to 80mm. Patio pavers are often thinner, and mixing the two is a common and expensive mistake.
- Measure the face dimensions. A standard rectangular paver runs roughly 4×8 inches, but Wellborn profile lines vary. Write down length and width of a full, unbroken paver.
- Photograph the color and texture in daylight. Color series names don’t carry across production batches perfectly, and the only thing that matters is how it reads against your existing run.
- Note the joint width and pattern. Herringbone, running bond, and basketweave all need different cutting, and the pattern tells us how the failed piece should come out.
On the OEM-versus-aftermarket question: for pavers, “aftermarket” is normal and fine. There’s no proprietary mechanism to protect, so a quality paver from a comparable series will perform the same as the original when the spec matches. What you don’t want is a thin box-store paver standing in for a 60mm driveway unit – that’s the mismatch that cracks under a loaded truck. If you want a full replacement job rather than a patch, we work with Belgard and Techo-Bloc as well, and we can show you the spec sheets so you’re comparing like to like. We also handle KraftMaid, Cambria, and Silestone for customers who are remodeling the entry at the same time.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Driveway & Pavers Is Failing
Almost nothing that looks like a paver failure is the paver’s fault. The paver sits on top of a base and bedding layer, and when that base moves, the surface tells you. Here’s what to watch for and what’s actually going on underneath.

- Pavers rocking or “walking” underfoot. The bedding sand has washed out from under the units, usually from water getting into the joints. Once a paver moves, it grinds against its neighbors and chips the edges.
- Persistent puddles or a low spot at the garage apron. The base wasn’t compacted to spec, or the slope has settled toward the house. In Fremont this shows up most in driveways that were laid over fill without proper grading.
- Widening joints and sand that won’t stay put. Joint sand is supposed to lock the field together. When it washes out season after season, the base is shedding water rather than draining it, and the field is slowly coming apart.
- Heaving or a lip at a seam. Water got under the edge and froze, or a tree root is lifting a section. Heaving is the one symptom that almost always means base work, not a surface patch.
- Cracked or chipped units along the border. Border pavers take the load from turning tires and plow edges. A failing border lets the field behind it spread, so fixing the border matters more than it looks.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Fremont, a full paver driveway installation runs $7,000 to $18,000 installed. A driveway replacement is $5,000 to $14,000. A targeted repair or resealing is far less – driveway sealing alone runs $250 to $700 – and if your pavers are sound and only the joints have failed, that’s often the honest fix. A paver patio runs $3,500 to $11,000 if you’re extending your hardscape while we’re on site.
What drives the number: square footage, how much base has to come out, whether the old surface needs hauling, and the paver series you choose. We don’t quote one price on the phone and hand you a different bill at the door. Every scope, every allowance, and every price change arrives as a written change order before work happens. If we open the base and find it’s worse than the inspection showed, you get the number in writing before we proceed, not after. Every eligible job gets permits pulled and inspections signed. Every completed job is backed by our written 90-Day Done Right Promise – if it’s not right, one call brings us back. The inspector works for you, not for us, which is exactly why we like him.
DIY or Call Us?
You can safely do the checking part. Measure thickness and face dimensions, photograph the color in daylight, note the pattern, and find where the puddling sits after a rain. That information makes any repair faster and cheaper, including ours. What you shouldn’t do yourself is pull pavers and dig into the base blind, or try to reset a heaved section without knowing why it heaved. The lifting and base work isn’t a spring-under-tension danger, but getting the compaction and slope wrong is how a three-paver patch becomes a full re-lay by the end of the season. That’s the most common DIY outcome we get called in to fix.
If your pavers are sound and you just need a seal or a patch, we’ll tell you so. If the base is the problem, you’ll get a written scope before anything moves. Call (833) 620-6162 and we’ll get you a free estimate.
FAQs

A well-installed paver driveway lasts 25 to 30 years or more. The pavers themselves often outlast the base under them, which is why base prep and drainage decide how long the surface actually holds up in Fremont’s wet winters and clay soil. Call (833) 620-6162 for an exact quote – estimates are free.
Yes, and often it should be. If a handful of units are rocking or one border has failed, a targeted repair with matching pavers costs a fraction of a full replacement. Replacement only makes sense when the base has failed across the field, not in a spot. We’ll tell you which one you’re looking at. Call (833) 620-6162 for a free second opinion on any written estimate.
A small repair is usually done in a day. A full driveway replacement takes several days, and the base and sealing steps add curing time that can’t be rushed. We give you a written schedule before we start, not on the morning of. Call (833) 620-6162 to schedule your free estimate.
We match by profile, thickness, and color series, and we bring samples so you can see the match against your existing run in daylight. Production batches vary, so a perfect color match isn’t guaranteed on any brand. When it isn’t, we say so before you commit. Call (833) 620-6162 for an exact quote – estimates are free.
If your driveway is failing, don’t sit on it through another rainy season – water in the base is what turns a patch into a full re-lay. Call Barrett & Sons Construction Fremont at (833) 620-6162 for a free estimate. A live person answers the phone 24 hours a day, seven days a week. We’re owner-operated, we pull the permits, and we put every price change in writing before work happens. Ask anyone on your street, or look up the license number yourself before you sign anything.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












