







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Kitchen Remodeling: The Fremont Owner’s Guide
If you own Wellborn cabinetry and a door, drawer, hinge or finish has started to fail, we handle Wellborn-compatible kitchen remodeling in Fremont with installed projects typically running $14,000 – $45,000 for a full kitchen, and smaller cabinet-and-counter work priced well below that. We connect Fremont homeowners with independent local professionals who perform the work, so we won’t pretend to carry parts or promise a truck at your curb today. Most owners find us the same way they find a failed part: a soft-close drawer that stops catching, a door that rubs the frame in July, or a finish that’s gone chalky around the sink. You’ll usually notice it before you know what to call it.

Key takeaways:
- A single failed hinge, glide or door on Wellborn cabinetry is often a small repair, not a remodel.
- Full Wellborn kitchen remodeling in Fremont lands in the $14,000 – $45,000 range depending on cabinet count, countertops and layout changes.
- We’re an independent service provider and not affiliated with Wellborn; we work with their specs and match parts by series and measurement.
- Every price change comes as a written change order before work moves, so the number you agree to is the number you pay.
We’re Barrett & Sons Construction, owner-operated since 1998 and licensed with the state. Every eligible job gets permits pulled and inspections signed, and every completed job carries our written 90-Day Done Right Promise. If something isn’t right, one call brings us back.
Which Wellborn Models This Applies To

Wellborn builds across a few cabinet lines, and the part you need depends on which one you have. Their framed and frameless constructions use different hinge mounting, and their raised-panel and flat-panel door styles take different hardware clearances. Before you buy anything, find the model identification label inside a cabinet door or on the back panel of a drawer box. Wellborn prints the series and finish code there. Photograph it. That single photo saves more wrong-part returns than any measurement.
Once you have the series, measure the door overlay (how much the door covers the cabinet face) and the hinge cup bore, which is typically 35mm on European-style concealed hinges. Wellborn’s standard concealed hinges are built to that bore, so a replacement hinge from a hardware store will physically fit, but the overlay adjustment range is where aftermarket units fall short. A cheap hinge may not reach the same closing angle, and your door will sit proud of the next one.
Here’s the OEM-versus-aftermarket decision for Wellborn specifically: for hinges, drawer glides and shelf clips, a quality aftermarket equivalent from a known hardware maker is fine and often cheaper, as long as you match the overlay and the glide length exactly. For doors, drawer fronts and matching finish panels, go OEM or go through a fabricator who can match the stain or paint code. Wellborn’s finishes are proprietary, and a “close enough” door on a run of six will read as a mistake every time you walk into the kitchen.
We also handle KraftMaid, Cambria and Silestone when a Wellborn kitchen needs new tops or a mixed setup.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Kitchen Remodeling Is Failing
Wellborn cabinets are built to last, and when something goes wrong it’s usually one part, not the whole kitchen. Here’s what Fremont owners describe to us, and what’s actually happening underneath.
- Doors that rub the frame in summer and free up in winter. That’s seasonal wood movement plus a hinge that’s lost its adjustment. The hinge is the fix, not the door.
- Soft-close drawers that slam. The damping mechanism inside the glide has failed. On most Wellborn glides it’s a wear part, and the glide swaps as a unit rather than being repaired.
- Doors that hang at an angle. A stripped screw in the hinge plate or a hinge cup that’s pulled loose. Refilling the screw hole with a hardwood plug usually restores a solid bite.
- Finish lifting or whitening around the sink and dishwasher. Steam and standing moisture get under the finish at the edges. Our Fremont climate is mild, but a kitchen without a working exhaust fan traps moisture year-round.
- Drawer boxes that rack or stick. The box has gone out of square or the glide track is worn. A new glide restores the slide; a warped box needs the box.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Hardware swaps are small money. A hinge or glide replacement on Wellborn cabinetry is typically a service-call-sized job, and our published offers include $40 Off Any Repair Over $200 and No Trip Charge Inside the County. When the kitchen needs more than parts, here’s what Fremont projects actually run:
| Project | Installed Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Backsplash Installation | $800 – $2,500 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Full Kitchen Remodel | $14,000 – $45,000 |
The range moves on cabinet count and door style, whether the layout changes (which pulls in plumbing and electrical), and countertop material. Cambria and Silestone sit at different price points than laminate. Labor is quoted separately from materials so you can see both numbers. We pull permits on eligible jobs and pass inspection. The work carries our 90-Day Done Right Promise in writing.
DIY or Call Us?
You can safely do three things yourself. Snap a photo of the model label. Measure the door overlay. Check whether the screws holding the hinge plate are tight. Beyond that, the failure mode is usually hidden inside the hinge or glide, and swapping a glide on a Wellborn drawer box without matching the exact length and mounting pattern is how you end up with a drawer that closes crooked or not at all.
Kitchen work isn’t dangerous the way an electrical panel is, but a door that comes off its top hinge while you’re holding it will land on your foot and take a chunk out of the floor. Two people and the right hinge, or one call, is the honest answer.
Call (833) 620-6162 and we’ll look at it with you. A free second opinion on any written estimate you’ve already got is one of our standing offers, and the 10% Senior & Veteran discount applies year-round.
FAQs

Most Wellborn hinges and soft-close glides give you 10 to 15 years of daily kitchen use before the damping or adjustment fails, and a glide under a heavy drawer of dishes goes sooner. If your kitchen is past that mark and one part has failed, expect the rest of the same part to follow within a couple of years.
Sometimes. A stripped hinge screw can be plugged and re-driven, and a hinge that’s simply out of adjustment can be reset without any new part. A glide that’s lost its soft-close damping can’t be repaired, and a cracked hinge cup can’t be glued reliably. Call (833) 620-6162 and we’ll tell you which one you’re looking at before you spend anything.
A single hinge or glide is a short visit, usually well under an hour, and a full run of hardware across a kitchen is typically a half day. Door or drawer-front replacement depends on lead time for the matching finish, which is the real variable in a Wellborn kitchen. Estimates are free, so call (833) 620-6162 and we’ll give you a real timeline.
We match by the Wellborn series and finish code on your cabinet label, then order through the original supplier or a hardware maker who meets the same spec. We aren’t affiliated with Wellborn and we don’t stock parts, so there’s no guesswork about what’s “on the truck.” You get a written quote for the exact part and the labor before anything is ordered. Call (833) 620-6162 to get started.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont and nearby areas.












