







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Installation & Refacing in Fremont, CA
Cabinet installation and refacing in Fremont usually costs between $6,500 and $28,000 depending on whether you’re replacing boxes or resurfacing the ones you have, and most jobs run three to ten working days once the cabinets arrive. If your doors are still square but twenty years out of style, refacing saves you 40 to 60 percent over a full tear-out. If the boxes are swollen from a slow leak or the layout fights the way your family actually cooks, installation is the smarter money.
We’re Barrett & Sons Construction, owner-operated out of the East Bay and working kitchens across Fremont for over 29 years. Tom Barrett and his sons run the crews, which means the person who quoted your job is the person who shows up to check the cabinet scribe against a wall that hasn’t been straight since the 1970s. Call (833) 620-6162 and a live person picks up, any hour. For the bigger picture on the room, start with our Kitchen Remodeling in Fremont page.
Key Takeaways
- Fremont cabinet work runs $6,500 – $28,000 depending on scope; refacing sits at the low end, full installation with new boxes at the high end.
- Homes in the Irvington and Mission San Jose districts often have out-of-plumb walls that need scribe work, so budget for it.
- We install KraftMaid and Cambria in kitchens, brands you can look up before you sign anything.
- Every price change arrives as a written change order before work moves. No surprise invoice at the end.
- Every eligible job gets permits pulled and inspections signed. The permit inspector works for you, not for us, and that’s why we like him.

When You Need Cabinet Installation & Refacing
Most of the calls we get about cabinets come from homeowners who can feel the problem but can’t quite name it. Here’s what that usually looks like in Fremont:
- Doors that stick or swing open on their own. A door that won’t close is usually a hinge issue, but a door that swings open by itself is a sign the box itself has pulled out of square. In the older ranch homes around Centerville, that’s often the wall moving more than the cabinet.
- Water damage under the sink. Slow drips from a disposal or a worn P-trap swell the particleboard, and once that happens the box is done. We’ve torn out more sink-base cabinets in Fremont’s 1950s and 60s stock than any other single unit.
- An earthquake retrofit left the kitchen behind. Plenty of Fremont homes got bolted to their foundations in the last decade, but the cabinets went back in crooked. If you’re already touching the room, that’s the moment to square it up.
- The layout doesn’t cook. A peninsula that blocks the fridge or a corner cabinet you literally cannot reach. Refacing keeps a bad layout. Installation fixes it.
- You’re selling in the next couple of years. A refaced kitchen photographs well and costs a fraction of a full remodel. If you want the room to read “updated” to a buyer without spending new-kitchen money, refacing is the honest move.
- Termites or dry rot in the boxes. We’ve found active damage in cabinet backs in Fremont homes with older crawl spaces. If that’s the case, refacing the front of a damaged box is throwing money at a problem that will come back.
Our Cabinet Installation & Refacing Process
Here’s the order we actually work in, from the first visit to the last drawer pull:
- In-home measure and layout talk. We walk the kitchen with you, take real measurements (not the rounded numbers from your last quote), and talk through what you actually cook and store. This is where we catch the out-of-plumb walls before they become a surprise.
- Written scope and allowance sheet. You get the full scope on paper: cabinet line, door style, hardware, counter handling, disposal and electrical, and every allowance itemized. An allowance that isn’t on paper is a surprise waiting for a date, so we write it all down.
- Permits pulled, if the job needs them. Cabinet swaps that move electricity or plumbing need a permit in Fremont. We pull them. The last contractor who told you permits were optional wasn’t doing you a favor.
- Demo and box prep. We protect the floors and counters, pull the old cabinets, and check the wall and framing behind them. If there’s rot, termite damage, or a wall that needs furring, we show you before we fix it, and any added cost arrives as a written change order.
- Installation or refacing. Full install means setting new boxes level and scribed to the wall, then hanging doors and drawers. Refacing means veneering the existing boxes, then new doors and drawer fronts on the same frames. KraftMaid is our go-to for new cabinetry, and Cambria goes in the counter work that pairs with it.
- Final walkthrough and the 90-Day Done Right Promise. We open and close every door with you, check the drawer glide on each one, and hand you the written guarantee. If something isn’t right in the next 90 days, one call brings Tom back to make it right.

Cabinet Installation & Refacing Pricing in Fremont
Honest ranges for Fremont kitchens, based on what we actually quote. Your number depends on the cabinet line, the linear footage, and how much the wall fights back.
| Scope | Typical Range | What’s Included |
|---|---|---|
| Refacing, small kitchen (10 – 15 linear ft) | $6,500 – $11,000 | Veneer on existing boxes, new doors and drawer fronts, hardware |
| Refacing, full kitchen (20 – 30 linear ft) | $11,000 – $18,000 | Same, plus counter handling and sink-area work |
| Full installation, stock or semi-custom (20 – 30 linear ft) | $14,000 – $24,000 | New boxes, doors, drawers, hardware, install labor |
| Full installation, KraftMaid or comparable premium line | $22,000 – $28,000+ | Premium cabinetry, custom sizing, full fit and scribe |
| Hardware and pull upgrade (add-on) | $400 – $1,200 | New pulls, hinges, soft-close upgrade |
| Wall repair or furring (add-on) | $600 – $2,500 | Out-of-plumb correction, rot or termite repair found during demo |
What moves the number most: cabinet line (stock versus KraftMaid or another premium brand), linear footage, whether the layout changes, and what we find behind the old cabinets. Fremont homes from the 1950s and 60s often hide a surprise or two, and we’d rather tell you that now than hand you a bill later. Every estimate is free, and you’re welcome to bring us another written bid for a second opinion. Ask about our published offers: $40 off any repair over $200, no trip charge inside the county, free second opinion on any written estimate, and a permanent 10% senior and veteran discount.
FAQs – Cabinet Installation & Refacing
Is refacing or full installation cheaper in Fremont?
Refacing is cheaper, usually by 40 to 60 percent. Refacing runs $6,500 – $18,000 for most Fremont kitchens, while a full installation with new boxes runs $14,000 – $28,000. Refacing only makes sense if the existing boxes are solid and the layout works. If there’s water damage, termite activity, or you want to move the sink, installation is the better spend. Call (833) 620-6162 for a free walkthrough and a straight answer on which one fits your house.
How long does cabinet installation take in Fremont?
Most full installations take three to five working days once the cabinets arrive, and refacing usually takes two to three. Custom or premium lines like KraftMaid can add two to four weeks of lead time before the job starts, so plan for that in your timeline. We’ll tell you the real delivery window up front so you’re not guessing. Call us and we’ll give you a realistic start-to-finish date.
Do I need a permit for cabinet work in Fremont?
You need a permit if the job moves electrical outlets, plumbing, or gas lines, which most full installations do. A straight refacing that doesn’t touch utilities usually doesn’t require one. We pull the permit when it’s needed and have the inspection signed. If a contractor tells you permits are optional, walk away. Call (833) 620-6162 and we’ll tell you exactly what your job needs.
Can you match my existing cabinets if I only need a few replaced?
Often yes, but it depends on the age and maker of what you have. If your cabinets are still in production, matching is straightforward. If they’re a discontinued line, we can usually get close with a custom door or a partial refacing, and we’ll show you samples before you commit. Bring us a door and we’ll tell you what’s possible. Reach out for a free second opinion on any written estimate.
Why Fremont Homeowners Call Barrett & Sons
We’re owner-operated, founded in 1998, and Tom Barrett publishes his name, his address, and his license number so you can look them up before you sign anything. Background-checked crew members carry the Barrett & Sons name on every visit. Our technicians have up to 28 years of experience, and the person who takes your call is a live human, 24 hours a day. If you’re comparing cabinet bids, take a look at what a full-remodel approach looks like when cabinets are part of a larger project, or ask us how cabinet work pairs with a bathroom remodel if you’re updating more than one room.
We’re the alternative to the national outfit that quotes one price on the phone and shows up with another. Every scope in writing, every allowance in writing, every change order in writing before a nail moves. If something’s not right, Tom lives twenty minutes away and wants to hear about it.
Ready for a real number? Call (833) 620-6162 for a free estimate on cabinet installation or refacing in Fremont. A live person answers any hour, and we’ll walk your kitchen, measure it properly, and put the whole scope on paper before you commit to anything.
Written by the team at Barrett & Sons Construction Fremont, serving Fremont.


