







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Union City
If you’re standing in a Union City backyard looking at a fence that’s leaning, rusted through at the post base, or just plain worn out, you’re in the right place. We install wood, chain link, vinyl, and aluminum fencing throughout 94587 – from the flat tract streets off Alvarado-Niles to the steeper lots climbing toward the Hayward Hills – and we quote every job in writing before a post hole gets dug. Call (833) 620-6162 and we’ll set up a free estimate. Union City fences take a beating from our wet winters and dry summers, and the difference between a fence that lasts and one that doesn’t usually comes down to how it was specified, not how it was built.
Why Barrett & Sons Construction Fremont Is Union City’s Preferred Fence Installation Company

We’ve been working in and around Union City long enough to know which streets flood at the post line in January and which hillside runs will lever themselves loose by the third wet season. That’s not a sales line – it changes what we recommend. The realistic answer for a downhill run above the flats is a different footer, a different fastener, and a different conversation about drainage than the same footage on flat ground.
Our technicians have up to 28 years of experience, and every eligible job gets permits pulled and inspections signed off. If the scope changes mid-job, you get a written change order before anything moves – no surprise invoice at the end. Every completed fence is backed by our written 90-Day Done Right Promise: if something isn’t right, one call brings us back.
Union City homeowners have been burned by national outfits quoting one price on the phone and showing up with another. We answer our own phone with a live person, publish our license number so you can look it up yourself, and put every scope and allowance on paper. That’s the whole pitch.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Union City
We handle the full range of residential and light commercial fencing in Union City. Here’s what most of our Union City calls involve.
Wood Fence Installation in Union City
Wood is still the most requested fence in Union City, and for good reason – it’s repairable, it looks right against the postwar ranch homes and stucco bungalows around the flats, and you can match an existing run without replacing the whole line. On hillside lots toward the Hayward Hills we spec pressure-treated posts set in properly sized concrete footings with drainage gravel, because a wood post that sits in saturated soil rots from the bottom up faster than anything above grade.

Chain Link Fence Installation in Union City
Chain link is the practical answer for side yards, dog runs, and property-line work where budget matters and sightlines don’t. The catch in Union City is corrosion: galvanized posts and standard fittings on the hillside side pit and loosen once winter runoff repeatedly saturates the footings. We spec hot-dip or stainless hardware on those runs so the fence outlasts the finish.

Vinyl Fence Installation in Union City
Vinyl holds up well in our marine-influenced climate – no painting, no rot, no termite worry – and it’s a strong fit for the newer infill townhomes near the BART station where a clean, uniform look matters. A typical vinyl fence installation in Union City runs $3,500 – $9,000 depending on height, linear footage, and gate count. We set vinyl posts in concrete with proper depth for the grade, which matters more on a slope than most homeowners realize.

Aluminum Fence Installation in Union City
Aluminum is what we recommend for pool enclosures, front-yard definition, and anywhere you want a fence that reads as permanent without blocking the view. Powder-coated aluminum with stainless fasteners handles the Bay Area moisture well. Aluminum fence installation in Union City runs $4,000 – $10,000 for most residential runs. We don’t put standard steel fasteners on an aluminum fence – that’s how you get galvanic corrosion at every connection within a few years.
Trusted Brands We Service in Union City
We install premium fencing materials and work alongside the same brands we trust across the trades – GAF and CertainTeed on the roofing side, and name-brand fencing hardware and fasteners you can look up rather than mystery parts off a van. We don’t stock materials locally; we order to spec for your job, which means you get the right hardware for a Union City hillside lot instead of whatever was on the shelf. Turnaround stays reasonable because we quote the full material list up front.
Common Fence Installation Problems We See in Union City Homes
- Corroded posts on the Hayward Hills side. Galvanized posts and fasteners on downhill runs corrode and loosen early once winter slope runoff saturates the footings, so the fence that looked fine in June is rocking by February. The fix is stainless or hot-dip hardware and footings that actually drain.
- Fences on the wrong property line. Plenty of flats tract fences near Alvarado-Niles were built without permits or a written scope, which is how a new install ends up on a neighbor’s line and triggers a change order and re-set before sign-off. We confirm the line before we dig.
- Uniform-depth posts on sloped lots. Downhill runs fail when every post is set at the same depth instead of stepped and tied to drainage and retaining structures, letting soil creep lever panels out of plumb. Slope lots need stepped footings, not a level string line.
- Old property-line fencing hiding drainage trouble. Pulling an original fence often exposes a failing retaining wall or a grade problem that was never addressed. Better to find it during the job than after the first storm.
See the difference
Before
After
Before
After
Before
AfterPricing for Fence Installation in Union City, CA

Fence pricing in Union City hinges on footage, height, material, and – the part most quotes skip – what the ground is doing. Flat tract lots and hillside runs are not the same job even when the fence looks identical on paper. Here’s what the market actually runs:
| Service | Typical Union City Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
Hillside work toward the Hayward Hills costs more than the same footage on the flats, because stepped footings, drainage gravel, and retaining tie-ins all add material and labor. The cheap spec saves you money up front and costs more within a decade once the posts loosen. We give you a written line-item estimate, free, with the coastal-spec and flatland-spec versions spelled out side by side so you can see the gap.
We Also Serve Cities Near Union City
We work throughout the surrounding area, including Newark, Fremont, Fairview, and Hayward. If you’re on the line between Union City and a neighboring city, our Fence Installation team can confirm coverage when you call. The same written estimates, pulled permits, and 90-Day Done Right Promise apply across the board.
Serving Union City, CA – Our Local Coverage Area
We serve Union City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Union City

Because the engineering is different, not the material. Hillside lots toward the Hayward Hills need stepped post footings, drainage gravel, and tie-ins to retaining structures to resist slope creep and winter runoff, and that adds cost. Flats tract lots near Alvarado-Niles usually need simpler footings but sometimes need property-line confirmation and permit sign-off the original fence never had. Call (833) 620-6162 for a written quote on your specific lot.
Stainless or hot-dip galvanized hardware, every time. Standard galvanized fasteners and fittings pit and fail early on hillside runs where winter runoff repeatedly saturates the footing, and mixing steel fasteners with aluminum fencing causes galvanic corrosion at every connection. We spec the right hardware for the grade and the material.
Most fence installations in Union City need a permit and an inspection sign-off, and the property line has to be confirmed before any post goes in. Plenty of older flats fences were built without either, which is how a new install ends up on a neighbor’s line. We pull permits on every eligible job and confirm the line first.
Correct post depth, proper bracing, and a gate sized for the actual grade – not a standard gate hung on a slope. On hillside lots we set gate posts deeper and brace them diagonally, because a gate hung on a grade that drops will pull itself out of square faster than anything else on the fence. We build gates to the grade, not to a flat-lot template.
Sometimes, and sometimes not – a fence is not a retaining wall, and treating it like one is how downhill posts fail. On the Hayward Hills edge we often price the fence run and the drainage or retaining fix together, because a winter storm there is as likely to expose a failing wall as a loose fence post. Call (833) 620-6162 for a free estimate on the combined job.
Get a Free Fence Estimate in Union City
Call (833) 620-6162 to schedule your free Union City fence estimate. We’ll walk the line with you, confirm the grade and the property boundary, and hand you a written line-item quote – no phone-number guess that turns into a bigger bill. Every scope and allowance is in writing, permits are pulled and inspections signed, and the 90-Day Done Right Promise is on every job. Our Union City neighbors can also ask about the permanent 10% Senior & Veteran discount and the free second opinion on any written estimate you already have.
Written by the team at Barrett & Sons Construction.












